You searched for: Distillation Components

Supplier: Ace Glass

This plain distillation column has an I.D

Supplier: Corning

PYREX®, borosilicate glass.

Supplier: Ace Glass

This Markham Still distillation apparatus is used for volatile fatty acid tests

Supplier: Ace Glass

When attached to the top of Snyder Column, this solvent recovery still is designed to recover solvent normally lost during Kuderna-Danish Evaporative Concentrations

Supplier: Ace Glass

This variable reflux ratio distillation head is constructed so that satisfactory operation can be maintained under any pressure condition

Supplier: Ace Glass

Receiver is graduated in 1mL subdivisions

Supplier: Ace Glass

This borosilicate glass connecting tube features an 0-4 Hi-Vac valve assembly for setting up Schlenk lines

Supplier: Ace Glass

This distillation apparatus is used for methoxy determination as described in U.S

Supplier: Ace Glass

This short path, minimum hold-up still is supplied with a one-piece, 89074-366 "cow" receiver with four 3 mL arms

Supplier: Ace Glass

This is a versatile unit that can be used as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water

Supplier: Ace Glass

Replacement borosilicate glass components for Buchi® R-220, R-220EX, and R-220SE rotary evaporators

Supplier: Ace Glass

Distilling trap adapters are placed above flask to prevent carryover of reactions that have a tendency to foam.

Supplier: DWK Life Sciences (KIMBLE)

Provide dual entry into a variety of flasks.

Supplier: DWK Life Sciences (KIMBLE)

Distillation receivers 14/20 cow type with three receivers.

Supplier: DWK Life Sciences (KIMBLE)

Design utilizes a thermometer bulb as column packing

Supplier: Ace Glass

Microscale Hickman still head is used to carry out micro-sample fractional distillations

Supplier: Ace Glass

This adapter features a 75° side arm.

Supplier: Ace Glass

This adapter is designed for connecting a distilling column with a vertical condenser.

Supplier: Ace Glass

This apparatus is useful for separating higher boiling liquids that require a short flask-to-column distance to prevent excessive condensation

Supplier: Kemtech America

The three inlets of this adapter allow for multiple entries into a single neck flask.

Supplier: SP Industries

This Kjeldahl distilling apparatus is made of borosilicate glass.

Supplier: Corning

Distallation receiver to determine the amount of dilution in crankcase oils when gasoline has been used as fuel. Receiver design keeps heat-sensitive materials away from the hot base of the flask. Receiver has a [ST] 24/40 top outer joint and a [ST] 24/40 sidearm inner joint.

Supplier: SP Industries

Designed for oils lighter than water, this distilling apparatus is made of borosilicate glass and consists of a Clevenger-type trap with a Standard Taper 24/40 outer joint on top and same size inner joint the sidearm

Supplier: Ace Glass

This is an excellent all-purpose receiver for general distillation work

Supplier: DWK Life Sciences (KIMBLE)

Inlet and outlet tubes are curved in opposite directions within the bulb

Supplier: Corning

These PYREX® 60° angle distilling connecting adapters have a 24/40 Standard Taper outer joint at the upper end and inner 24/40 Standard Taper joints and on the sidearm and lower joints

Supplier: Ace Glass

Full-size standard taper 24/40 jointed, low-holdup, short-path still is available unjacketed or jacketed with indents

Supplier: Ace Glass

This Hempel distillation column has a [ST] 24/40 reinforced outer joint at top, a [ST] 24/40 inner joint at bottom, and a perforated glass disc for packing support

Supplier: Ace Glass

This Hennion Design distillation head is used for variable reflux ratio, and can be operated under vacuum

Supplier: Ace Glass

Graduated to 125mL in 1mL subdivisions