You searched for: Distillation Components

Supplier: Glassco

Claisen adapters provide dual entry into a variety of flasks.

Supplier: Ace Glass

This distillation receiver is for use where separate fractions are desired without disturbing the distillation pressure

Supplier: Ace Glass

This distillation head has a cold finger type condenser and 0-3mm PTFE stopcock plug with PTFE ring seals for reflux control

Supplier: Ace Glass

This apparatus comes has a [ST] 10/30 joint for a 25 mm immersion thermometer

Supplier: Ace Glass

This short path still is designed to be effective with high boiling materials at low pressures, where moderate foaming, as well as slight bumping, can be tolerated

Supplier: Glassco

Distilling Receivers have a 135° angle between the center line of the condenser and the receiver tubes

Supplier: Glassco

Distribution adapter, 24/40, Cow-type design features three receivers spaced 40° apart.

Supplier: Glassco

This trap adapter is placed above the flask to prevent carry-over of reactions which have a tendency to foam.

Supplier: MilliporeSigma

1St

Supplier: Glassco

Adapter is equipped with an inner drip joint at the bottom and an outer joint at the top.

Supplier: Glassco

This distillation adapter is designed to accommodate an immersion thermometer.

Supplier: Ace Glass

This distillation apparatus is used for converting simple and the most complex cyanides into HCN, and for isolating cyanide from most interferences before measuring by titration or colorimetric analysis in the examination of industrial wastes and other water

Supplier: Ace Glass

This steam distillation apparatus is used for the exhaustive distillation of pesticides and industrial chemicals from water, sediments and tissue, and the simultaneous extraction of the distillate by a small volume of organic solvent

Supplier: Ace Glass

This cyanide distillation apparatus is used in testing for soluble and insoluble cyanides in water

Supplier: Ace Glass

Benchtop purification kits designed for the Cannabis Industry.

Supplier: Ace Glass

A small, low holdup automatic head which can be completely disassembled for easy cleaning or replacement of parts

Supplier: Ace Glass

This apparatus is used for a limit test for arsenic, as described in European Pharmacopeia, 1997, page 51

Supplier: Ace Glass

This distillation apparatus is used for methoxy determination as described in U.S

Supplier: Glassco

Dean-Stark distilling receiver is used for easy separation of water from reaction or distillation systems

Supplier: DWK Life Sciences (KIMBLE)

This apparatus is designed for use in the analysis of industrial waste waters, saline, and reagent grade water

Supplier: Ace Glass

This short-path distillation apparatus is designed for small quantities, where holdup between flask and receiver must be minimized, but where it is also desired to measure vapor temperature with the accuracy of larger apparatus

Supplier: Ace Glass

This zero holdup, no-splash, short path still is for small quantity distillations with the accuracy of larger stills

Supplier: Ace Glass

This short path, minimum hold-up still is supplied with a one-piece, 89074-366 "cow" receiver with four 3 mL arms

Supplier: Ace Glass

This is a versatile unit that can be used as a solvent recovery still for azeotropic separations of solvents, either heavier or lighter than water

Supplier: Kemtech America

Rotating cow receiver allows four flasks to be progressively filled.

Supplier: Glassco

This Distillation Adapter is also designed for use as a rotary evaporator washer.

Supplier: Ace Glass

This distillation head has a Newman stopcock which facilitates reflux ratio adjustment and reduces hold-up on walls -- the product drops directly into the receiver

Supplier: SP Industries

With side arm at angle of 75° from lower part of main tube, these borosilicate glass distilling adapters have three standard taper joints of the same size.

Supplier: Ace Glass

Reflux distillation splitter adapter for all sizes of reactors

Supplier: Ace Glass

This is a borosilicate glass solvent distillation head designed to maintain solvents or vapors in an no-air atmosphere