You searched for: Presaturated Cleanroom Wipes

Supplier: VWR International

Premoistened wipers are designed for environmentally sensitive areas, and are ideal for wiping optical parts, delicate glassware, electrodes, cuvettes, microscopes, and lenses.

Supplier: VWR International

These Spec-Wipes are designed for cleaning laminar flow benches, cleanroom surfaces, and general process equipment.

Supplier: VWR International

These Spec-Wipes are excellent for cleaning rough, abrasive, or irregular surfaces, yet soft enough for delicate surfaces.

Supplier: CONTEC, INC. MX

PROSAT® meltblown polypropylene wipes offer exceptional cleanliness suitable for use in a wide variety of critical environments. Saturated with a solution of 70% USP grade isopropanol and 30% deionized water, the wipes provide a uniform and consistent application of the solution to the surface. PROSAT® PS-911 and PROSAT® PS-850 wipes are exceptionally clean and also free from additives of any kind. This particular meltblown polypropylene contains very low levels of sodium and other ions.

Supplier: Kimberly-Clark

Low-linting wipers are designed for use in ISO Class 4 (FED-STD-209E Class 10/M2.5) cleanroom assembly operations, pharmaceutical operations, and other clean environments.

Supplier: Texwipe

Sterile AlphaSat® 10 wipers incorporate SterileWipe™ LP 10 sealed-border wipers, pre-wetted with your choice of IPA solution.

Supplier: Texwipe

Wipers are made from 100% continuous-filament knit polyester and are presaturated with a blend of 70% 0.2 µm filtered semiconductor-grade isopropyl alcohol and 30% deionized water.

Supplier: Texwipe

POLYSAT® wipers are made from 100% polypropylene and pre-wetted with 70% IPA.

Supplier: Texwipe

These convenient wipers provide portion control and reduced potential of spillage in and out of the cleanroom.

Supplier: Texwipe

Double-knit 100% continuous-filament polyester wipers offer high sorbency performance.

Supplier: Contec

Premoistened polyester wipes are designed for general-purpose cleaning in ISO Class 5 (FED-STD-209E Class 100/M3.5) environments.

Supplier: CONTEC, INC. MX

The SATWIPES® Sigma™ consists of a perforated roll of saturated wipes which are dispensed through a center-pull canister. The wipes are made of 55% cellulose and 45% polyester creating highly sorbent and durable wipe.

Supplier: Contec

SATWipes® Delta™ wipes consist of a perforated roll of saturated wipes dispensed through a center-pull canister. The wipes are 100% nonwoven polyester fabric creating a soft, durable, and clean wipe.

Supplier: FG CLEAN WIPES TE

Convenience, consistency, and cleanliness.

Supplier: FG CLEAN WIPES TE

Convenience, consistency, and cleanliness.

Supplier: Contec

PROSAT® sterile polynit heatseal vial wipes are made from 100% knitted polyester presaturated with a blend of 70% IPA and purified water. These polyester wipes generate a low level of particles and fibers and are ideal for use in product contact areas, reducing the risk of product contamination.

Supplier: Contec

Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unravelling creating an even more durable fabric with strong edges.

Supplier: Contec

PROSAT® Polynit Heatseal Wipes are manufactured from 100% knitted textured polyester with laser-cut sealed edges for very low levels of particles and fibers. Polyester wipes are chemically resistant and exceptionally low in particles and fibers. An interlock knit creates a durable fabric, the addition of a periodic additional stitch of a no-run interlock knit prevents the fabric unraveling creating an even more durable fabric with strong edges.

Supplier: Contec

PROSAT® Sterile Polynit Heatseal LE Wipes are made of 100% knitted polyester Polynit Heatseal, presaturated with a blend of 70% isopropanol and 30% water for injection (WFI). Each lot is tested before release and low endotoxin certified to less than 1 EU/wipe.

Supplier: Contec

PROSAT® Sterile Polynit Heatseal Wipes are made of 100% knitted polyester that is laser cut to bond the fibers at the edges of the wipe. This creates a very clean nonabrasive edge that allows full utilization of the wipe surface. The wipe is chemical resistant and exceptionally low in particles and extractable residue making it ideal for critical cleaning. They are laundered and packaged in an ISO Class 4 cleanroom.

Supplier: Contec

Presaturated with Quaternary ammonium and ethyl alcohol.

Supplier: Contec

The SATWipes® C1 with 100% acetone consists of a roll of 6×9" saturated wipes which are dispensed through a convenient center-pull canister that eliminates the need for solvent bottles.

Supplier: Contec

A replacement canister for the SATWipes® 6×9" rolls saturated with IPA greater than 70%.

Supplier: CONTEC, INC. MX

PROSAT® Sterile Delta™ Wipes are made from a 100% nonwoven polyester fibers which are hydroentangled together using no binders or additives. The resulting fabric is extremely soft, clean, and strong.

Supplier: CONTEC, INC. MX

PROSAT® PS-Si Delta™ Wipes feature 100% nonwoven polyester presaturated with a blend of 10% isopropanol and 90% DI water. Designed for the semiconductor industry, the PROSAT® PS-Si Delta™ Wipes are the cleanest nonwoven wipe available. The durable wipe is made from 100% nonwoven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: Contec

Premoistened knitted polyester wipers and nonwoven polypropylene wipers are saturated with various solvent blends.

Supplier: Micronova

Presaturated wiper provides lubricant in controlled applications.

Supplier: Contec

Microfiber wipes presaturated with 70% IPA and 30% DI water.

Supplier: Contec

PROSAT® sterile polypropylene low endotoxin wipes are presaturated with 70% USP grade isopropanol and 30% deionized water. The meltblown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: Contec

Gowning room wipes are made using a strong cellulose/polyester non-woven fabric that is folded for easy pickup and very low in extractable residue.