Masterflex® Standard Pump Head Tubing Loading Keys, Avantor®
Supplier: Avantor Fluid Handling
Ensure proper tubing alignment and installation.
Expand 2 Items
CarboFrit® Puller/Inserter Tool, Restek
Supplier: Restek
Hook end for removing CarboFrit® inserts.
Expand 1 Items
Column Installation Pre-Swaging Tools for GC, Agilent Technologies
Supplier: AGILENT TECHNOLOGIES, INC (CSD)
Handy stainless-steel tools for proper column installation lengths into the most popular GC inlets.
Expand 5 Items
Inlet Liner Packing Tool, Restek
Supplier: Restek
Recommended for inlet liners with an ID ≥2 mm.
Expand 1 Items
Capillary Installation Gauge for Thermo Scientific TRACE & Focus SSL, M4 Ferrules, Restek
Supplier: Restek
For use with Thermo Scientific TRACE & Focus SSL.
Expand 1 Items
PEEK Fitting Extractor, Restek
Supplier: Restek
Drill into the broken fitting, then screw the extractor into the fitting and remove it easily.
Expand 1 Items
Capillary Installation Gauge for Agilent 5973/5975 MS, Restek
Supplier: Restek
Capillary installation gauges seat ferrules onto columns for consistent installations.
Expand 1 Items
Capillary Installation Gauge for Agilent GCs, Restek
Supplier: Restek
The capillary installation gauge seats graphite ferrules onto a column for consistent installations.
Expand 2 Items
Vial Picker for Cryogenic Vials, Globe Scientific
Supplier: Globe Scientific
For the safe and convenient removal of frozen vials from storage boxes.
Expand 1 Items
'Lid-Off' Lid Remover, Qorpak®
Supplier: Qorpak
To safely open tightly sealed pails, simply hook “Lid-Off” over the edge of the lid and lift.
Expand 1 Items
FID Jet Removal Tool for Agilent 5890/6850/6890/7890 FIDs, Restek
Supplier: Restek
FID jet removal tools securely grip jet in socket for easy removal or installation.
Expand 1 Items
Septum Nut Removal Tool, Restek
Supplier: Restek
Use this septum nut removal tool to easily remove the septum nut without touching the heated nut.
Expand 1 Items
Capillary Installation Gauge for Shimadzu 17A, 2010, and 2014 GCs, Restek
Supplier: Restek
Use a capillary installation gauge for Shimadzu 17A, 2010, and 2014 GCs to seat ferrules onto a column for consistent installations.
Expand 1 Items
Septum Puller, Restek
Supplier: Restek
Septum pullers lend an enhanced level of comfort in easily removing septa and O-rings from GC systems.
Expand 1 Items
Inlet Liner Removal Tool, Restek
Supplier: Restek
With this tool, easily remove liners from injectors without any more burned fingers.
Expand 1 Items
Capillary Installation Gauge for Bruker/Varian GCs for use with ¹/₁₆" ferrules, Restek
Supplier: Restek
Use a capillary installation gauge for Bruker/Varian GCs to seat ferrules onto a column for consistent installations.
Expand 1 Items
Trough Filament for P30 Micropipette
Supplier: WORLD PRECISION INSTRUMENTS LLC
A glass puller is a laboratory instrument used to create fine, tapered glass micropipettes or microelectrodes. The choice of filament for the glass puller is crucial, as it directly influences the heating element's performance and, consequently, the quality of the pulled glass. Different types and shapes of filaments can be used, and the selection depends on factors such as the desired pipette. A trough filament is used in some capillary glass pullers, and it is designed to creates a trough or indentation along its length.
Expand 1 Items
Mini Wool Puller/Inserter, Restek
Supplier: Restek
This miniature puller/inserter device is ideal for handily manipulating wool plugs.
Expand 1 Items
Barblock Fitting and Tubing Tools and Accessories
Supplier: ST. GOBAIN- TRAVERSE CITY
Easily install your Barblock Fittings.
Expand 3 Items
Postmortem Needle Puller, Mortech
Supplier: Mortech Manufacturing
This instrument has a curved end that holds the postmortem needle firmly allowing easy tissue pull through.
Expand 1 Items
Tapered Needle Files 4", Restek
Supplier: Restek
Tapered needle files serve a variety of uses where fine points of manipulation are required.
Expand 1 Items
P30 Nichrome Filament
Supplier: WORLD PRECISION INSTRUMENTS LLC
P30N filament are installed with P-30/N pullers. Recommended to pull very short tapers.
Expand 1 Items
Grooving Tool for PFA Compression Fittings
Supplier: ANDON SPECIALTIES INC.
Get a secure seal at higher pressures.
Expand 1 Items
Ferrule Removal Kit, Restek
Supplier: Restek
The tapered tools in this kit have teeth designed to grip and remove fused silica adapter ferrules that have become stuck in the fitting detail.
Expand 1 Items
Spinal Cord Remover, Mortech
Supplier: Mortech Manufacturing
Easily removes spinal cord without affecting surrounding tissue.
Expand 1 Items
Replacement Parts and Accessories for Mininert® Precision Sampling Valves for Vials, Restek
Supplier: Restek
These replacement parts for Mininert® Precision sampling valves for vials are extremely functional and economical.
Expand 1 Items
Liner Cap Removing Tool for Thermo Scientific GCs, Restek
Supplier: Restek
For use with Thermo Scientific Focus, TRACE, and TRACE Ultra GCs.
Expand 1 Items
Trough Filaments
Supplier: WORLD PRECISION INSTRUMENTS LLC
A glass puller is a laboratory instrument used to create fine, tapered glass micropipettes or microelectrodes. The choice of filament for the glass puller is crucial, as it directly influences the heating element's performance and, consequently, the quality of the pulled glass.
Expand 3 Items
Box Filaments
Supplier: WORLD PRECISION INSTRUMENTS LLC
A glass puller is a laboratory instrument used to create fine, tapered glass micropipettes or microelectrodes. The choice of filament for the glass puller is crucial, as it directly influences the heating element's performance and, consequently, the quality of the pulled glass. Different types and shapes of filaments can be used, and the selection depends on factors such as the desired pipette.