Multi-Element Standards
Avantor offers a wide range of certified cationic standards designed for instrument calibration in ion-exchange chromatography (IC) applications, which can be applied toward environmental or food analysis and quality control. IC is an analytical technique used for the separation and quantification of anions and cations in aqueous samples. Avantor offers high-purity, well-defined reference materials ideal for low-ppm level quantification or trace analysis. Bottles of cationic standards are available for a range of elements.
JM-21 Multi-element Oil Based Standards, Specpure®, Thermo Scientific
Supplier: Thermo Scientific Chemicals
21 elements: Ag, Al, B, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Mo, Na, N, Ni, P, Pb, Sn, Ti, V, Zn
Expand 2 Items
Instrument Calibration Standard 2 CLP, Ricca Chemical Company
Supplier: Ricca Chemical
Instrument Calibration Standard 2 CLP, Ricca Chemical Company
Expand 1 Items
Quality Control Standard 1, for use in EPA Method 200.7, Ricca Chemical Company
Supplier: Ricca Chemical
For use in EPA method 200.7. Contains the following Elements (concentration in ug/mL) AG-100, Al-100, B-100, Ba-100, K-100, Na-100 and Si-50, in 5% HNO3. Container: Plastic.
Expand 1 Items
ICP Calibration Standard 7, VeriSpec®, Ricca Chemical Company
Supplier: Ricca Chemical
7 component standard in 5% hydrochloric acid
Expand 1 Items
ICP-MS Calibration Standard 29, VeriSpec®, Ricca Chemical Company
Supplier: Ricca Chemical
29 components in 5% nitric acid.
Expand 1 Items
VeriSpec® ICP Multi-Element Interference Check Solution A, RICCA Chemical Company
Supplier: Ricca Chemical
14 component standard.
Expand 1 Items
Primary Drinking Water Metals Standard, RICCA Chemical Company
Supplier: Ricca Chemical
This is a multielement solution that was prepared gravimetrically to contain the elements and concentrations stated below.
Expand 1 Items
Quality Control Standard 15 for ICP, Ricca Chemical Company
Supplier: Ricca Chemical
Quality Control Standard 15 for ICP, Ricca Chemical Company
Expand 1 Items
ICP-MS Tuning Solution 5, VeriSpec®
Supplier: Ricca Chemical
5-Component mixture in 5% HNO₃/tr HF
Expand 1 Items
Multi-Element Standard for ICP, Trace Metals III for Water, Ricca Chemical Company
Supplier: Ricca Chemical
This is a multielement solution that was prepared volumetrically to contain the elements and concentrations stated below
Expand 1 Items
Mixed Calibration Standard 3A, Rev 3.3, Ricca Chemical Company
Supplier: Ricca Chemical
Mixed Calibration Standard 3A, Rev 3.3, Ricca Chemical Company
Expand 1 Items
ICP Calibration Standard 15, (10X) VeriSpec®
Supplier: Ricca Chemical
15-component standard in 5% nitric acid
Expand 1 Items
Standard #3 for ICP 3300 Med, Ricca Chemical Company
Supplier: Ricca Chemical
Standard #3 for ICP 3300 Med, Ricca Chemical Company
Expand 1 Items
VeriSpec® ICP-MS Tuning Solution 9 Components, RICCA Chemical Company
Supplier: Ricca Chemical
Certified reference material (CRM) for ICP-MS
Expand 1 Items
Mixed Calibration Standard 5R, Ricca Chemical Company
Supplier: Ricca Chemical
Mixed Calibration Standard 5R, Ricca Chemical Company
Expand 1 Items
VeriSpec® ICP-MS Tuning Solution, 26 Components, RICCA Chemical Company
Supplier: Ricca Chemical
Certified reference material (CRM) for ICP-MS
Expand 1 Items
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.