You searched for: Specimen Mounting Supplies
Choose from a full array of products designed for insect specimen mounting, including spreading boards, mounting pins, mounting paper, pinning blocks, and holding fluids for preserving specimens without the use of formaldehyde. Complete mounting kits are also available for mounting and displaying insects. Labels and pins can be purchased independently to supplement larger packages, and pins have extremely sharp points and small heads to ensure precise pinning without tearing mounting specimens.
Blue Silicone Rubber, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Blue silicone rubber is extremely high tear, high tensile strength, two components and tin catalyzed RTV silicone rubber
Expand 1 Items
Metallurgical Mount Holder, 1-¹/₄" and 30 mm, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This mount holder which is made from machined aluminum with stainless steel Allen screws is specifically for 1 1/4” and 30mm metallurgical mounts.
Expand 2 Items
Cold Mounting Sytems, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Epoxy Systems - Epoxies have the lowest shrinkage of all cold mounting resins
Expand 3 Items
CoverWell™ Imaging Chambers, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
CoverWell™ Imaging chambers are designed to stabilize and support thick and free-floating specimens for confocal microscopy and imaging applications.
Expand 9 Items
Clear Silicone Rubber, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This silicone cures at room temperature with no shrinkage and offers a unique water clear see through rubber with excellent tear strength, chemical and heat resistance.
Expand 1 Items
Large Double Slot Vise SEM Specimen Holder 25 mm, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Clamps thin specimens or cross sections without conductive paint or tape for scanning electron microscopy.
Expand 2 Items
K-kit Specimen Holder for Liquid TEM, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
K-kits are enclosed specimen sample holders designed to facilitate convenient TEM observation of liquid samples, allowing nanoobjects, aggregates, and agglomerates (NOAAs) in liquid samples to be characterized.
Expand 4 Items
Numbered Gunshot Residue Sampler, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
SEM mounts with adhesive tab secures in glass vial to avoid contamination.
Expand 1 Items
Well Bars Sets, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Well bar sets for cryo-embedding are available in small, medium and large sizes, in addition to slides, chucks, and freezing blocks.
Expand 7 Items
45° Pin Mount and 90° Profile, Combination Holder, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
For use in Hitachi S-800, S-4000, S-4100, S-4200, S-4300, S-4500, S-4700 and S-3600N SEMs.
Expand 2 Items
Acrylic Plastic Casting, Electron Microscopy Science
Supplier: Electron Microscopy Sciences
Acrylic plastic casting is a thermosetting acrylic-polymer plastic with excellent clarity
Expand 3 Items
SEM Large Double Slot Vise, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Clamp thin specimens and cross sections without conductive paint or tape for viewing in a scanning electron microscope using the double slot vise specimen holder.
Expand 1 Items
Goniometer Bases, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Goniometer Bases tightly capture the MicroRT™ tubing to allow seamless room-temperature and low-temperature data collection. Available in several different base styles that are compatible with MicroRT™ tubing and with standard cryo-tools, cryo-vials, magnetic goniometer head mounts, and most automating hardware.
Expand 14 Items
Multi Holder for 49 Pin Stubs, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This 117 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with 302 stainless steel springs that hold the pin stubs in place.
Expand 2 Items
Multi Pin Holder for 12 Pin Stubs, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This 62 mm in diameter multi pin holder is designed to save time. It is made from machined aluminum with stainless steel Allen wrench screws.
Expand 2 Items
mPrep/s Specimen Processing Capsules, Electron Microscopy Sciences
Supplier: ELECTRON MICROSCOPY SCIENCE
mPrep/s™ capsules allow users to fix, dehydrate and embed specimens in a single vessel. This capsule is highly recommended for transmission and scanning electron microscopy, but can also be used for any sample preparation.
Expand 5 Items
Flat Embedding Molds, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Single Tapered Ends have standard flat embedding mold, 21 numbered cavities, and measures L x W: 14 x 5 mm.
Expand 6 Items
Stainless Steel Brain and Heart Matrices, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
When your rodent brain, heart, or other similar organ needs to be sliced as thinly as possible, these new stainless steel matrices with a 0.5mm channel will achieve these slices – coronal or Sagittal – with ease.
Expand 8 Items
Four-Pin Stub Holder, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
It accommodates four pin type, up to 12.5 (1/2") surface specimen stubs, with 3.1 mm (1/8") diameter pin.
Expand 1 Items
Set Screw Vise, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This set screw vice which is made from machined aluminum with stainless steel allen set screws has an open slot that is 4 mm wide x 5 mm deep. And has a 3.2 mm dia. pin.
Expand 1 Items
Carbon Planchet Holder, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Two configurations are offered: 1/2" dia. (12.7 mm) and 1" dia. (25 mm) with 1/8" (3.1 mm) pin.
Expand 1 Items
Double Slot Mini Vise SEM Holder, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Clamps thin specimens or cross sections for scanning electron microscopy.
Expand 1 Items
Multi Holder for 4 Pin Stubs, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This multi pin stub adapter for JEOL 32 x 11 mm is designed to save time. It is made from vacuum aluminum with stainless steel set screws.
Expand 1 Items
45° Multi Holder for 6 Pin Stubs, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This 35 mm in diameter 45 Degree multi pin holder is designed to save time. It allows for a higher SE signal without having to tilt the specimen It is made from machined aluminum with stainless steel Allen set screws. It accommodates up to six standard 12.7 mm (1/2") pin stubs.
Expand 2 Items
Fortress™ FIB Sample Holder, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Fortress™ FIB Holder with CastleGuard™ Protection are reusable holders that secure FIB sample that are held in a specific orientation without the use of adhesives, adhesive tabs, or conductive paints.
Expand 2 Items
Supplies for TEM Sample Preparation, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
A collection of supplies for TEM sample preparation.
Expand 1 Items
Standard Pin Stub SEM Mount Small Non-Slotted Head, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Non-Slotted head pin stub mounts are for use with Cambridge, Leo, Philips 500, Cameca SEMs. Made from lathe finished ultra-pure aluminium.
Expand 1 Items
45° Multi Holder for 3 Pin Stubs, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
This 25.4 mm in diameter 45 Degree multi pin holder is designed to save time. It allows for a higher SE signal without having to tilt the specimen It is made from machined aluminum with stainless steel Allen set screws. It accommodates up to three standard 12.7 mm (1/2") pin stubs with 3.2 mm (1/8") pin.
Expand 1 Items
Double Slot Mini Vise, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Clamp thin specimens and cross sections without conductive paint or tape for viewing in a scanning electron microscope using the double slot vise specimen holder.
Expand 1 Items
Cambridge, LEO, Phillips 500, Cameca Mounts, Electron Microscopy Sciences
Supplier: Electron Microscopy Sciences
Aluminum small, slotted head. Surface measures: 9.6 x 11.2 mm (3/8 x 7/16"). Pin 3.1 mm (1/8").