Supplier: Thermo Fisher Scientific

PS. Nunc-Immuno™ modules have been developed for ELISA techniques where the demands of versatility require a different solution to the standard 96-well plate format. Available with a choice of MaxiSorp™, PolySorp™, MediSorp™ and MultiSorp™ surfaces. All MaxiSorp™ modules are certified for binding homogeneity. Framed modules (external dimensions: 128×86 mm) fit all standard equipment.

Supplier: HELLMA

The Hellma® calibration standards comply with all necessary standards and regulations and thus offer the highest quality for recalibrating your spectrometer.

Supplier: EPPENDORF

The robust Reference® 2 is the successor to the Reference® pipette and features a new design, reduced weight and unique one-button operation.

Supplier: NICKEL ELECTRO

Clear plastic lift-off gabled lid designed to allow full use of the whole width of a Clifton water bath with the lowest height of the gable being 45 mm above the bath. This means test tube racks or flasks can be placed across the whole width of the bath without fouling the lid, maximising the bath working area. Insulated handle. Lid fits into the tank ensuring all condensation runs back into the bath and not down the side onto the bench top., For: NE2-10D, NE1-8, NE2D-4/8, NE2-8D, NE5-10D, NE2D-8/22 and NE1D-8

Supplier: Thermo Fisher Scientific

Integral filter made from water-repellent PE which does not swell on accidental penetration by liquid, allowing recovery of the sample. Protect pipettes and the samples from contamination with Thermo Scientific™ Finntip™ Filtered Pipette Tips. These sterile, disposable pipette tips keep pipettes clean, and are perfect for PCR amplification applications and for pipetting radioactive, infectious, and aerosol-emitting samples. Available in racks with a wide volume range of 0,2 μl to 10 ml.

Supplier: Sartorius Balances

Cubis® II MCE precision balances with essential user interface offer a maximum load between 320 and 14200 g and a readability of 1 to 100 mg provide, ideal model for every application.

Supplier: 3M

For effective protection against a range of particulates and gases encountered in the welding process, use 3M™ Adflo™ powered air respirator. The Adflo™ respirator connects directly with any Speedglas™ series respiratory welding helmet and can protect users against both particles and gases depending on the filter used.

Supplier: Sartorius Balances

Cubis® II MCE analytical balances with essential user interface offer a maximum weighing capacity between 120 and 520 g in combination with readability of 0.1 mg.

Supplier: ELMA SCHMIDBAUER

The Elmasonic P ultrasonic series is ideal for all applications in analytical and medical laboratories and in industrial production. Six different sizes are available. These practical units are easy to operate with a clearly arranged display showing all set and actual parameters. Several special features make the units perfect for intensive cleaning applications. All models are equipped with a mechanical timer up to maximum of 15 minutes.

Supplier: Portwest

Hi-Vis T-Shirt made from 100% recycled polyester fabric.

Supplier: IKA

The RV 3 pro V-C Complete package is the complete solution for your rotary evaporator setup as all components and connections required for operation are included.

Supplier: ROBU GLASFILTER

ROBU® conical filter funnel with fused VitraPOR® filter and standard joint NSK 10/19, 14/23 or 19/16 ensures efficient, secure filtration in laboratory applications, combining chemical resistance with precise pore structure.

Supplier: Ansell

Hand-specific, ergonomically designed gloves with a beaded cuff. Ideal for use in laboratories, pharmaceutical, biotech and medical device manufacturing.

Supplier: SI Analytics

The number of samples to be processed is growing constantly while at the same time the demands on reliability are increasing in accordance with GLP and ISO standards. The SI Analytics sample changer (TW 7200) helps you meet these increased requirements and free up highly qualified employees from routine work. TW 7200 basic unit with two integrated magnetic stirrers, including external power supply 100 to 240 V with adapters for EU, US and UK, USB cable for direct PC connection and connection cable for rod stirrer.

Supplier: Heidolph Instruments GmbH & Co.KG

Powerful electronic stirrers that feature a smooth start operation which prevents spills and splashing media. The speed ramps up slowly until set speed has been reached. Both models feature safe start and stop of operation via an intuitive glass slide touch panel to avoid accidental start-up. An overtemperature sensor shuts off the unit in dangerous heat-up situations, ideal for unattended continuous operation. All units are designed for continuous 24-hour operation, including challenging high viscosity applications in polymer research. High torque levels give better mixing results in less time, maintenance-free motors reduce repairs and down time. Hei-TORQUE Value 400 and Hei-TORQUE Precision 400 units have two speed gears.

Supplier: Thermo Fisher Scientific

These Nunc™ cell culture flasks are designed for culture consistency, cell health, and reproducibility. Choose from a variety of surfaces and sizes with culture areas ranging from 25 to 500 cm² to suit your specific applications and cell types.

Supplier: Thermo Fisher Scientific

Finnpipette™ F2 offers superior robustness and durability even in the most demanding applications.

Supplier: HELLMA

The Hellma® calibration standards comply with all necessary standards and regulations and thus offer the highest quality for recalibrating your spectrometer.

Supplier: MICRONOVA

A series of rounded T-mop covers with snaps that easily roll down walls, as well as clean awkward corners, tight spaces, and under equipment. Available in a range of fabrics for specialised cleaning.

Supplier: Thermo Fisher Scientific

Protein Concentrators PES are disposable ultrafiltration centrifugal devices with a polyethersulfone (PES) membrane for concentration, desalting, and buffer exchange of biological samples such as proteins and nucleic acids.

Supplier: MILLIPORE

Syringe filters are single-use, membrane-based devices used for the removal of particulate impurities from liquid and gas samples prior to analysis by methods such as HPLC, ion chromatography, gas chromatography, ICP, and dissolution testing. Proper filtration of samples improves the quality and consistency of analytical results and decreases instrument downtime.

Supplier: Portwest

This hardwearing contrast colour jacket is made of 60% cotton and 40% polyester. The soft handle cotton rich fabric is built to last and will look and feel great. Cotton ensures it washes well at 60 °C whilst the polyester gives a ruggedness essential for daily use.

Supplier: Portwest

Stylish, functional, and durable, the PW2 winter jacket offers protection and warmth in extreme weather conditions. Key features include contrast coloured panels for added style, an adjustable detachable hood, and plenty of pockets for storage.

Supplier: EPPENDORF

Eppendorf microplates provide exceptional stability during centrifugation with g-Safe® technology and efficient sample identification with the OptiTrack® Matrix. The design features, including RecoverMax® well design and raised well rims, ensure reliable sealing and facilitate maximum sample recovery.

Supplier: Ansell

These overalls consisting of two layers of fabric (non woven inner layer and microporous PE film) provide both protection and comfort with exceptional liquid and particulate protection. Ideal for industrial applications.

Supplier: Portwest

Rugged trouser made from durable Kingsmill polyester/cotton 300 g fabric with a modern fit and adjustable leg length. Pockets have oxford reinforcement for extra durability.

Supplier: Portwest

These multi use high visible bodywarmer vests are specially designed for those who will not compromise on style, comfort, protection and performance. These garments are designed to keep warm, dry and visible in all conditions. The 300D Oxford Industry High Visibility provides comprehensive range of single and combination garments in a highly durable and cleverly designed innovative styles.

Supplier: Portwest

A classic style with a full update, made from a sustainable polyester/cotton fabric.

Supplier: Honeywell Chemicals

Anolyte for coulometric Karl Fischer titration of ketones and Li-ion battery electrolytes, preferred for cells with diaphragm, acetonitrile-based, free of alcohols (free of CMR substances)

Supplier: Corning

Filtered, maxymum recovery, and sterile pipette tips in a truly sustainable packaging format that reduces plastic by 70% per case.