615 Results for: "VICI JOUR RESEARCH"

Supplier: VICI JOUR RESEARCH

Adapter, connects safety exhaust filter to SCAT® waste caps and A.I.T. smart waste caps

Supplier: VICI JOUR RESEARCH

GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.

Supplier: VICI JOUR RESEARCH

These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: VICI JOUR RESEARCH

Titanium frits are preferred over stainless steel frits for the application related to the analysis of sensitive substances such as biomolecules.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: VICI JOUR RESEARCH

In-line filter, PEEK, Pk: 1

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Supplier: VICI JOUR RESEARCH

O-ring, FEP coated, GL45 thread

Supplier: VICI JOUR RESEARCH

These sample loops are made from PEEK tubing and fittings. Mechanically strong, chemically inert polymer ideal for HPLC applications. Softener-free polyethylene caps are used to avoid contamination of the tubing.

Supplier: VICI JOUR RESEARCH

These VICI Jour sample loops are made of high quality stainless steel 316.

Supplier: VICI JOUR RESEARCH

This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.

Supplier: VICI JOUR RESEARCH

This is the ideal tool for cutting ¹/₁₆ and ¹/₈" stainless steel tubing, leaving smooth, uniform cuts requiring a minimum of deburring and/or reaming.

Supplier: VICI JOUR RESEARCH

The Last Drop filter/sparger combines filtration and sparging in a single unit. The PTFE housing contains a mobile phase filter with either a stainless steel or PTFE filter element. Connect the solvent line to the stepped connector, which accommodates 1,5, 2,2, and 3,5 mm ID tubing. A 1/4"-28 fitting connector connects a 1/8" helium line connects to the 10 µm sparger. Both connectors are PEEK.

Supplier: VICI JOUR RESEARCH

PTFE.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: VICI JOUR RESEARCH

These PTFE tubings are biocompatible, chemically inert and suitable for lower or mild pressure applications.

Supplier: VICI JOUR RESEARCH

Stainless steel with PE caps and colour coded sleeves.

Supplier: VICI JOUR RESEARCH

Replacement cutting wheel

Supplier: VICI JOUR RESEARCH

The Easy-Flange flange-rolling tool has been developed for flanging all PTFE and PTFE-like tubes with Ext.Ø between ¹/₁₆' and ¹/₈' where fittings requiring a flange.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: VICI JOUR RESEARCH

These micro valves for LC and GC has a unique design of the fitting detail which allows a leak-free seal with no potential for rotor damage from overtightening.

Supplier: VICI JOUR RESEARCH

Barbed adapter, M10 × 1 thread, for 8 mm I.Ø tubing, PA

Supplier: VICI JOUR RESEARCH

Replacement cellulose filter, PP, Pore size: 0,2 µm, Ø: 15 mm

Supplier: VICI JOUR RESEARCH

The ChromBox is an all-purpose analytical spare parts kit for HPLC. It contains the most often used spare parts made both of high quality Type 316L SS as well as PEEK and PTFE.

Supplier: VICI JOUR RESEARCH

In LC applications involving proteins, peptides, nucleic acids, or other samples of biological origin, metal systems may interact with samples. The PEEK starter kit facilitates replacement of stainless steal tubing, fittings, ferrules, mobile phase filters and more, to create a biocompatible environment for samples and mobile phase.

Supplier: VICI JOUR RESEARCH

These PFA (perfluoro alkoxy) tubing has excellent chemical stability and mechanical strength.

Supplier: VICI JOUR RESEARCH

This cutter provides burr-free perpendicular cuts of tubing up to ¹/₈" in PEEK, PTFE, ETFE and other polymeric tubing.