615 Results for: "VICI JOUR RESEARCH"

Supplier: VICI JOUR RESEARCH

Cutter for cutting PTFE, PEEK and other polymeric tubing.

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. Work with all ¹/₁₆'' OD tubings and female 10 to 32 ports. They are rated to 350 bar and can be used with virtually any HPLC fittings, eg. Swagelok, Parker, Rheodyne, Valco.

Supplier: VICI JOUR RESEARCH

ETFE.

Supplier: VICI JOUR RESEARCH

Precolumn filter kit has a standard 10 to 32 fitting and fits direct to most column types without introducing an additional dead volume.

Supplier: VICI JOUR RESEARCH

FEP, natural or coloured.

Supplier: VICI JOUR RESEARCH

The in-line PEEK guard cartridges extend the life of analytical columns by trapping contaminants from the sample and mobile phase, thereby preventing loss of retention. Only PEEK and titanium contacts the mobile phase and sample. This system is ideal for use with proteins or other biopolymers that may be contaminated or absorbed by steel surfaces.

Supplier: VICI JOUR RESEARCH

In-line guard cartridge holder, PEEK, complete with one guard cartridge

Supplier: VICI JOUR RESEARCH

The Easy-Flange flange-rolling tool for flanged fittings is suitable for PTFE and PTFE-like tubing with O.Ø. between ¹/₁₆ and ¹/₈".

Supplier: VICI JOUR RESEARCH

These stainless steel 316 sample loops are cut using an electrolytic cutting process followed by ultrasonic and high pressure steam cleaning to remove contaminants, dried and capped with softener free caps to avoid the recontamination of the tubing.

Supplier: VICI JOUR RESEARCH

PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: VICI JOUR RESEARCH

For opening and tightening ¹/₄'' nuts.

Supplier: VICI JOUR RESEARCH

These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.

Supplier: VICI JOUR RESEARCH

These disposable in-line filters offer an easy and cost-effective way to protect valuable columns against particles.

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of ¹/₁₆" Ø tubing, or an ¹/₈" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: VICI JOUR RESEARCH

Flanging disc with 0,5 mm stainless steel pin for PEEK tubing

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

Precolumn filter, Stainless steel, Porosity: 2,0 µm, 1000 bar, Swept volume: 0,68 µl

Supplier: VICI JOUR RESEARCH

Tefzel.

Supplier: VICI JOUR RESEARCH

DIN50 safety caps seal to the bottle/canister with an O-ring behind a PTFE lip, so the O-ring is therefore not a wetted part. Unused ports can be closed with the stopcock.

Supplier: VICI JOUR RESEARCH

These safety exhaust filters can be placed on the waste bottle of an HPLC system, to protect workers from solvent vapors in the ambient air.

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: VICI JOUR RESEARCH

The stainless steel in-line filter has virtually no hold-up volume and can be used in various applications without significant loss of efficiency.

Supplier: VICI JOUR RESEARCH

This safety air outlet filter regulates the pressure during helium sparging.

Supplier: VICI JOUR RESEARCH

This regulator installs on the detector drain line and prevents bubble formation in the flow cell during outgassing. It has an adjustable back pressure from 0 to 20 bar (15 to 300 psi) without disconnecting from the system. Other sizes available.

Supplier: VICI JOUR RESEARCH

PPS hex-head nut, flangeless, for use with collapsible ferrule, for 1/16" O.Ø tubing or 1/4"–28 flat bottom ports, PPS

Supplier: VICI JOUR RESEARCH

With flat filter element which allows the maximum amount of mobile phase to be drawn from the reservoir without introducing air into the system.

Supplier: VICI JOUR RESEARCH

Biocompatible PEEK construction. The unique feature of the VICI Jour® column coupler is that it adjusts to fit all 10-32 fitting types. No matter what the fitting type and pilot length – Valco®, Waters®, Upchurch®, Rheodyne®, etc., the coupler adapts to bottom out in the pilot automatically, consequently creating only small void volumes.