"VACUUBRAND"

Supplier: VACUUBRAND

These centring and sealing rings for small stainless steel flange KF connections. With aluminium sealing ring.

Supplier: VACUUBRAND

These small flanges with thread made of stainless steel.

Supplier: VACUUBRAND

High vacuum, helium leak-tested right angle valves VE have stainless steel bellows which seals the drive mechanism without any gap on the vacuum side.

Supplier: VACUUBRAND

PTFE vacuum hose is antistatic. The inner side of the PTFE hose is smooth for increased chemical resistance, reduced deposits, and high conductance.

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: VACUUBRAND

Rubber.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit optimizes vacuum conditions automatically by precisely and continuously adjusting the diaphragm pump´s motor speed. Thanks to the motor speed control the pump operates only when vacuum is needed, saving energy and reducing maintenance.

Supplier: VACUUBRAND

Reducing cross pieces with small flanges KF made of aluminium or stainless steel.

Supplier: VACUUBRAND

Rotary vane pumps from VACUUBRAND offer great performance in a compact design. Even with the gas ballast open, they enable a very good ultimate vacuum. You also benefit from extended oil change and maintenance intervals thanks to optimised lubrication circuit and large usable oil volume.

Supplier: VACUUBRAND

The three-stage VARIO-SP® diaphragm pumps, with its variable speed drive system, attains significantly higher pumping speed and a better ultimate vacuum than the corresponding fixed speed pump. The brushless motor (maintenance-free) enables easy integration of the pump into other equipment, and operation independent of line voltage. The motor speed is either fixed or can be adjusted externally via electronic control signals for adaptation to process requirements.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

These filter centering rings for small flange KF connections made of stainless steel with NBR sealing ring.