2979 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

Designed to accurately split and control the low flow stream of a single incoming supply.

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Connector, tubing, Male luer slip adapter, for 1/16” I.Ø tubing, PP

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Bottom-of-the-Bottle™, A-520x replacement solvent filter cups, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Low pressure inline filters offer excellent protection for any low pressure application.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Precision cutter for fused silica tubing ensures clean, trouble free cutting of fused silica tubing.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Designed to cut capillary-sized polymer tubing.

Supplier: UPCHURCH SCIENTIFIC

MARVELXACT PLS 50µM X 350MM 1 * 1 KIT

Supplier: UPCHURCH SCIENTIFIC

MARVELXACT PLS 25µM X 350MM 1 * 1 KIT

Supplier: UPCHURCH SCIENTIFIC

NanoPort Ferr 1.0mmx1.0mm Deep 1 * 1 item

Supplier: UPCHURCH SCIENTIFIC

NanoPort Asy Hdlss 6-32 Coned 360µm 1 * 1 item

Supplier: UPCHURCH SCIENTIFIC

Female Nut M6 Green PEEK 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

Omega End Fitting/Green 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

TUB TYGON R3603 .110 X .040 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

Slv FEP Blu 1/16 x .033 x 2in 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

TUB FEP NAT 1/16 X .030 X 500FT 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

TUB SS 1/16 X .010 X 13CM(5.12IN) 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

TUB FEP NAT 1/8 X .062 X 60IN 1 * 1 items

Supplier: UPCHURCH SCIENTIFIC

TUB SS 1/16 X .005 X 122CM(48.03IN) 1 * 1 items