7400 Results for: "Tlenek+antymonu(III)"

Supplier: Ansell

These disposable gloves feature an advanced proprietary nitrile formulation which delivers an increased tactile sensitivity, reliable durability and up to three times the puncture resistance of latex or vinyl disposable gloves.

Supplier: Nitritex

BioClean RABS and isolator gloves are manufactured from nitrile with incredibly low levels of particles and excellent ESD properties.

Supplier: DuPont

Made from a lightweight and durable fabric (<450 g per garment), Tychem® 2000 C garments utilise the strength of Tyvek®, and a polymeric barrier coating, to offer good permeation barrier protection against a wide range of inorganic chemicals and biological hazards (even under pressure).

Supplier: DuPont

Shin-length gown with wrap-over rear closure, hook and loop neck closure, and waist ties.

Supplier: DuPont

These caps are made of Tyvek® which is a fabric composed of flash spun high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It provides an inherent barrier to particles, microorganisms and non-hazardous light liquid splash.

Supplier: Ansell

These ambidextrous silicone-free gloves are produced in a controlled environment. They feature exceptionally low levels of extractables and particles for excellent product protection.

Supplier: DuPont

These hooded protective coveralls are made from a non halogenated, flame-retardant polypropylene SMS non woven fabric providing limited protection against flame spread (index 1) in addition to protection against particles and limited liquid splashes or sprays of water-based liquids. They must always be worn on top of a primary FR protection garment, such as Nomex®.

Supplier: Ansell

Microflex® 93-360 is a thin, chemical resistant disposable glove designed for cleanroom environments. It is made of an innovate, synthetic composite material (nitrile/neoprene) for tough chemical protection.

Supplier: DuPont

These sleeves are made of Tyvek® which is a fabric composed of flash spun high density PE, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size).

Supplier: Ansell

These fully coated gloves feature a PU foam insulation for additional warmth and comfort. The textured surface provides unbeatable grip on wet and slippery surfaces. The robust, liquid-repellent PVC coating does not absorb water, does not stiffen like leather and remains flexible even in sub zero temperatures.

Supplier: Ansell

Fully-coated with PVC, EDGE® 14-663 safety gloves ensure greater flexibility and comfort while guarding hands against chemical, mechanical and biological hazards, making them ideal for workers exposed to oils, greases, acids, caustics and alcohols.

Supplier: DuPont

This hood is not clean-processed and not sterilised made of Tyvek®, a flash spun high density polyethylene. The fabric is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 µm in size) and is ultra-low linting.

Supplier: Ansell

These gloves are made of a high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance.

Supplier: Showa

The new SHOWA AX200 has an 18-gauge seamless knit, with nylon static dissipative yarn. It is free of natural rubber latex and is touchscreen compatible, silicone-free and fingerprint-free.The AX200 by SHOWA meets the requirements for electrostatic properties (ESD).

Supplier: Nitritex

Clean and sterile sleeve/glove system, nitrile sleeve attached to an ambidextrous polychloroprene (BioClean S-BFAP) glove by a channel ring and O-ring.

Supplier: MAPA

These ambidextrous, liquidproof gloves with beaded cuffs are made of nitrile.

Supplier: Merck

All Spectroquant® test kits can be used with the Prove range of spectrophotometers and Nova 60/60A instruments. Tests can be used not only on photometers and spectrophotometer from Merck, but also on photometers and spectrophotometers from other suppliers (programming details available on request).

Supplier: ISOFIELD IRELAND

The Isofield NS300 non sterile nitrile glove is ideal for ISO Class 4 cleanrooms and above.

Supplier: ISOFIELD IRELAND

The Isofield LS300 non-sterile latex glove is ideal for ISO Class 4 cleanrooms and above.

Supplier: HONEYWELL SAFETY

Polyamide with its polyurethane coating provide excellent abrasion and tear resistance. Non pilling, the polyamide is suitable for precision work. The ventilated back and ultra light coating optimise the glove's breathability.

Supplier: MACHEREY-NAGEL

Photometric test kits for the determination of chloride in water samples.

Supplier: KIMBERLY CLARK

Hand-specific gloves made of specially formulated natural rubber latex for superior strength and durability. Non pyrogenic, non hemolytic. With tapered and beaded cuffs for easy donning and removal.

Supplier: Honeywell Safety

Hand-specific gloves with rolled cuffs and diamond embossed finish. Suitable for cleanroom use and protection from acids and caustics.

Supplier: Ansell

Superior breathable microporous laminate technology, offering Type 5/6 protection.

Supplier: Showa

These fully nitrile coated gloves are either available with cotton flock lining or without lining. They protect hands from oils, hydrocarbons, grease and abrasion, while providing an effective long lasting grip.

Supplier: Sartorius

Arium® pro Type I water purification systems are designed for sophisticated users to meet all their requirements for reagent grade water, needed both for critical applications and routine analyses. Different versions are available for reliable and optimal analytical results.

Supplier: Cytiva

HiPrep Heparin FF columns are well suited for capture or intermediate purification of proteins with affinity for heparin.

Supplier: Showa

These disposable gloves with longer cuff are made from 100% nitrile. They provide protection against the penetration of chemicals.

Supplier: Ansell

Rear entry suit with neoprene rubber face seal for a close fit to full face respirators. Ideal for use in hazardous areas where protection against concentrated chemicals and biological agents is required.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of AOX in water samples and accessories for the round cell test NANOCOLOR® AOX.