6641 Results for: "Naczynia+reakcyjne,+kszta\u0142t+cylindryczny&pageNo=27"

Supplier: Antibodies.com

Mouse Tmem27 ELISA Kit is a sandwich Enzyme-Linked Immunosorbent Assay (sELISA) designed for the in vitro quantitative determination of mouse Tmem27 in tissue homogenates, cell lysates or other biological fluids.

Supplier: GA

Cryogenic direct thermal labels intended for labeling already frozen surfaces and containers under deep-freeze conditions, as low as (–80 °C).

Supplier: Hospidex

Sharpsafe®, historic pioneer in protecting against the risk of sharps injuries and sustainability in medical waste packaging management, presents the recycled 5th generation needle containers.

Supplier: Brady

Mark cables and wires with the B-427 self-laminating vinyl label material, designed with a clear self-laminating protective layer. Print almost anywhere with a durable Brady portable label printer.

Supplier: DuPont

These Tyvek® overalls are made from flash spun, high density polyethylene, providing an ideal balance of protection, durability and comfort. Tyvek® is permeable to both air and water vapour, yet repels water-based liquids and aerosols. It offers an excellent barrier against fine particles and fibres (down to 1 micron in size).

Supplier: ALSICO

Comfortable multirisk trousers in inherent flame retardant fabric.

Supplier: THERMO MATRIX TECHNOLOGIES

Permanently attached, laser-etched 2D barcodes on the bottom of each tube allow you to scan and decode tubes at once without removing them from the rack and allow data to be associated with each tube.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: FRISTADS KANSAS

These overalls with elasticated braces are made of different fabrics. The water-repellent fluorescent material in manufactured from 80% polyester and 20% cotton. The other parts are made of 65% polyester and 35% cotton which is slightly brushed on reverse. Reinforcements are made of 100% polyamide.

Supplier: Cole Parmer

ANTI-VIBRATION MOUNTS STR8 1 * 1 items

Supplier: Avantor Fluid Handling

ULTRA PLT SIL 5/16X11/16 100FT 1 * 1 items

Supplier: Avantor Fluid Handling

ULTRA PLAT SIL 1/16X1/4 100FT 1 * 1 items

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: Avantor

Avantor® ACE® Method Development Kits (MDK) are designed to maximise selectivity, offering a powerful and reliable approach to UHPLC/HPLC method development. Based upon an ultra-inert, high efficiency silica, Avantor® ACE® phases incorporate the latest developments in LC stationary phase design, providing chromatographers with more choices for alternative selectivity, without compromising stability or robustness.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suited to workshops, and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed, ensuring a pleasantly comfortable cotton feel. The outside can withstand the roughest demands and will not fade, even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: MILLIPORE

The filters without binder resin retain their structural integrity without weight loss when heated up to 500 °C and can therefore be used in gravimetric analysis as well as for the filtration of hot gases.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.

Supplier: Antibodies.com

Human Bcl-6 ELISA Kit is a sandwich Enzyme-Linked Immunosorbent Assay (sELISA) designed for the in vitro quantitative determination of human Bcl-6 in serum, plasma or other biological fluids.

Supplier: FRISTADS KANSAS

These overalls consist of different fabric combinations. The fluorescent material is water repellent and manufactured from 80% polyester and 20% cotton. The other parts are made of 65% polyester and 35% cotton with a soft nap on reverse. The reinforcement is made from 100 % polyamide.

Supplier: FRISTADS KANSAS

Functional, two-tone winter jacket made from Beaver nylon (50% nylon, 50% cotton), a hard-wearing and tear-proof material that is resistant to dirt, oil and water. With faux fur on the collar and on the body, quilted lining in the sleeves and contrasting seams.

Supplier: Avantor Fluid Handling

FTNG FLRXB 1/4 PVDF 1 * 1 items

Supplier: Avantor Fluid Handling

3/8 X 1/2 PT TBNG 1 * 50 items

Supplier: Thermo Fisher Scientific

These Nunc™ cell culture flasks are designed for culture consistency, cell health, and reproducibility. Choose from a variety of surfaces and sizes with culture areas ranging from 25 to 500 cm² to suit your specific applications and cell types.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: Thermo Fisher Scientific

Natural tubes are made from 100% virgin PP to help ensure maximum clarity for biological-based work.

Supplier: FRISTADS KANSAS

Thanks to its durability and high degree of comfort, the PR54 jacket is perfectly suited to workshops and industrial and service enterprises. The material is made from 65% polyester and 35% cotton. The inside is brushed and as a result conveys a pleasantly comfortably cotton feeling. The outside is also resistant to the roughest demands and will not fade even after countless washes.

Supplier: FRISTADS KANSAS

Thanks to their durability and comfort, these trousers are perfectly suitable for use in garages as well as in industrial and service companies. The material is made of 65% polyester and 35% cotton. The inside is brushed and provides a comfortable cotton feel. The outside is very hardwearing and does not bleach, even after countless washes.