6906 Results for: "Liners+gc+septa+gc+ferrules"

Supplier: MACHEREY-NAGEL

Septa, PTFE virginal, white, Hardness: 53° shore D, Thickness: 0,25 mm, Ø: 12 mm

Supplier: Agilent

Septa, PTFE/red silicone

Supplier: Trajan Scientific and Medical

Vespel GC ferrules are made from 100% high-temperature polyimide, a hard polymeric material that tends to seal permanently to capillary columns when in use. A firm torque is required to compress and seal.

Supplier: Merck

Septa, PTFE/butyl, Ø: 20 mm

Supplier: MACHEREY-NAGEL

Septa, Butyl red/PTFE gray, Hardness: 50° shore A, Thickness: 2,4 mm, Ø: 22 mm

Supplier: Agilent

CrossLab, Septa, PTFE/butyl

Supplier: Agilent

Septa, PTFE/natural rubber

Supplier: DWK Life Sciences

A high purity PTFE coated silicone septum for use with DURAN® GL 45 open top screw caps and all sises of DURAN® GL 45 laboratory bottles. Can be used for sampling using a syringe and a needle.

Supplier: Merck

These porous polymers, based on 2,6-diphenyl-p-phenylene oxide, are widely used as an adsorbent in both air collection and purge trap applications.

Supplier: Agilent

Septa, Silicone, tan PTFE/white silicone

Supplier: MACHEREY-NAGEL

Septa, PTFE virginal, white, Hardness: 53° shore D, Thickness: 0,25 mm, Ø: 9 mm

Supplier: Lenz Laborglas GmbH & CO.KG

Silicone, translucent.

Supplier: LA PHA PACK

VWR®, Septa, Butyl injection stopper, grey

Supplier: BIRZLE PETER

Silicone, transparent.

Supplier: Merck

Septa, White tan PTFE/silicone, Thickness: 2,3 mm, Ø: 16 mm

Supplier: Thermo Fisher Scientific

Tenax® TA, Packed: Bottle

Supplier: THERMO NATIONAL SCIENTIFIC

These septa are designed to be used with 8 mm screw thread caps.

Supplier: CHROMACOL

Chromacol™, Septa, PTFE/silicone, For: 18 mm screw caps

Supplier: EP SCIENTIFIC

These silicone septa with PTFE coating are suitable for VOA vials and bottles with 24-414 open-top cap.

Supplier: LA PHA PACK

VWR®, Septa, PTFE virginal, Hardness: 53° shore D, Thickness: 0,25 mm

Supplier: MACHEREY-NAGEL

Septa, Silicone white/PTFE blue, Hardness: 45° shore A, Thickness: 1,5 mm

Supplier: DWK Life Sciences

High-quality silicone seals developed for the needs of the pharmaceutical and biotech industry.

Supplier: THERMO NATIONAL SCIENTIFIC

These septa are suitable for use with 13-425 threaded caps or 13 mm snap/crimp caps.

Supplier: Thermo Fisher Scientific

Use Thermo Scientific™ SureSTART™ 20 mm stoppers with crimp vials that have a 20 mm opening and a secure push fit, including our SureSTART 20 mm crimp headspace vials (level 2).

Supplier: Agilent

These inlet liners prevent adsorption and ensure accurate sample transfer onto the GC column through a robust deactivated surface. These liners are recommended for trace level analysis of active analytes. Liners with inert wool retain non-volatiles, prolonging column life and lowering frequency of MS source maintenance.

Supplier: DWK Life Sciences

Silicone, translucent.

Supplier: Trajan Scientific and Medical

Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Supplier: CHROMACOL

High purity 20 mm silicone/PTFE seal for liquid-liquid extraction and trace analysis. PTFE thickness 0,02 mm and silicone 3 mm.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

Deactivated liners for ATAS optic injectors.