6906 Results for: "Liners+gc+septa+gc+ferrules"

Supplier: Agilent

These septa are available for a variety of applications and have different upper temperature limits. The lower temperature septa are usually softer, seal better and can withstand more punctures (injections) than their high temperature counterparts.

Supplier: Trajan Scientific and Medical

Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: HAMILTON BONADUZ

Low bleed high temperature septa are designed for the lowest bleed possible at temperatures of up to 400 °C. They can be used in combination with Mass Spectrometers or in applications where septa bleed interferes with trace analysis. These septa are typically used for manual injection applications.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: DWK Life Sciences

Septa, Septa, Silicone, Ø: 20 mm

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: METROHM

These septa are made from silicone rubber.

Supplier: VWR Collection

VWR®, Septa, Beige silicone/natural PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 23 mm

Supplier: VWR Collection

VWR®, Septa, Red butyl/grey PTFE, Hardness: 55° shore A, Thickness: 2,4 mm

Supplier: Agilent

Septa, Red PTFE/white silicone

Supplier: Trajan Scientific and Medical

These GC ferrules are made from 100% PTFE. They are soft, completely inert, and have very low friction.

Supplier: Agilent

CrossLab, Septa, Tan PTFE/silicone

Supplier: Agilent

CrossLab, Septa, Red PTFE/white silicone

Supplier: Thermo Fisher Scientific

Level 2 septa are manufactured and tested to ensure low bleeding, robustness, and reproducibility of results for your routine GC-MS and LC-MS analyses.

Supplier: Agilent

Septa, Septa, PTFE/silicone, For: 10 ml vials

Supplier: MACHEREY-NAGEL

Septa, PTFE virginal, white, Hardness: 53° shore D, Thickness: 0,25 mm, Ø: 8 mm

Supplier: DWK Life Sciences

WHEATON®, Septa, Plain septa, autoclavable, PTFE faced silicone, Ø: 8 mm

Supplier: Merck

These porous polymers, based on 2,6-diphenyl-p-phenylene oxide, are widely used as an adsorbent in both air collection and purge trap applications.

Supplier: Agilent

Septa, PTFE/silicone

Supplier: Corning

Individual septa for 0,5 ml ABI Prism® 310 sequencer tubes.

Supplier: Merck

This rubber turn-over closure with serrated stopper is ideal for air and moisture-sensitive chemistry procedures. After piercing with non-coring needle, rubber closes puncture, providing air and moisture tight seal to protect contents of vessel or container from atmosphere.

Supplier: MACHEREY-NAGEL

Septa, PTFE virginal, white, Hardness: 53° shore D, Thickness: 0,25 mm, Ø: 12 mm

Supplier: Merck

Septa, Septa, for use with 4ml vial, White PTFE, Thickness: 0,25 mm, Ø: 13 mm

Supplier: Agilent

Septa, PTFE/red silicone