1101 Results for: "LABCONCO"

Supplier: LABCONCO

Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available in a range of configurations. The CentriVap® DNA model is supplied with a built-in 34 litres/min diaphragm pump, two 177 ml glass traps and a DNA rotor (60×1,5/2,0 and 72×0,5 ml). Model with glass lid is recommended for evaporation of solvents that are not compatible with acrylic (acetone, acetonitrile, ethanol, DMSO, etc.). The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, etc.).

Supplier: LABCONCO

Watertight pan cart with durable 18-gauge welded steel frame has a glacier white epoxy-coated rust-resistant finish. Ideal for transporting cellware, cages, glassware, and more.

Supplier: LABCONCO

Upper exhaust transition adaptor, 152,4 mm width, 2,3 kg, For: Protector® XVS ventilation stations and Protector® demonstration hoods, protector work stations, Xpert balance enclosures

Supplier: LABCONCO

XPert™ filtered balance stations are vented balance enclosures designed to protect the user during powder weighing operations. The built-in HEPA filter, mounted in the upper plenum, removes particulates, so that clean air is exhausted to the atmosphere. XPert® filtered balance station is 'stationary' because ducting to an outside blower or house exhaust system is required. Powder weighing applications found in pharmaceutical research and other industries are ideal for these enclosures. Interior dimensions accommodate large micro and analytical balances and containment-enhancing features ensure personnel safety.

Supplier: LABCONCO

This evaporator speeds evaporation of up to 50 samples at the same time using dry heat and nitrogen blow down. Unlike water bath heaters, the dry block heater requires less maintenance, no distilled water or additives, and adds no potential source of contamination.

Supplier: LABCONCO

PVC exhaust duct is type one, unplasticised, schedule 40, lightweight, and corrosion-resistant.

Supplier: LABCONCO

This Kjeldahl digestion/distillation apparatus combines macro digestion and distillation processes for nitrogen determination of samples up to five grams into one space-saving unit.

Supplier: LABCONCO

Desiccator cabinet, Vacuum tubing kit, with tubing inner Ø 6,35 mm and 12,7 mm, each 1219 mm long, tubing clamps, barbed reducer

Supplier: LABCONCO

Use the Sash-glider to clean both sides of a biological safety cabinet's sash while it remains closed, to avoid contamination risks.

Supplier: LABCONCO

Versatile and efficient glassware washers designed for efficient and consistent washing of narrow-neck glassware and general labware in critical washing environments.

Supplier: LABCONCO

It offers a choice to protect materials that do not generate harmful aerosols or vapors. Its been designed with 99,99% efficient HEPA filter, the air from this minimizes cross contamination in the work area and provides a particulate free work environment. It has wide range of applications including plant tissue culture research, media preparation, electronic part inspection, syringe filling, medical device assembly and non hazardous parenteral drug formulation. These benches should never be used in conjunction with biohazardous material, toxins or radionuclides.

Supplier: LABCONCO

This glove box is designed to create controlled oxygen and moisture atmospheres for working with products that are easily oxidized. The glove box features a one-piece moulded fibreglass liner, two 25 W fluorescent lights, and an optional pressure control module.

Supplier: LABCONCO

These Biosafety cabinets provide personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. Cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional canopy connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research.

Supplier: LABCONCO

Handy cart stores lab supplies and may be moved easily to within reach of the user working at a bench, fume hood or biological safety cabinet. Three right side compartments accommodate pipettes and other supplies. Top left side compartment with front panel cutouts accommodates boxes of wipes and gloves. The hinged panel may be pivoted down for loading. Drawer holds a variety of miscellaneous small instruments and supplies. Open storage area in bottom holds larger equipment and supplies. Work surface and bottom are constructed of corrosion-resistant white high density polyethylene that is easy to clean. Remaining components are constructed of corrosion-resistant white ABS.

Supplier: LABCONCO

This vacuum pump is designed for use with aqueous samples that are compatible with FreeZone Freeze Dry Systems, CentriVap Centrifugal concentrators and Protector® Controlled Atmosphere glove boxes. It comes with a single phase direct drive motor, totally enclosed and fan cooled. When the motor overheats, the thermal overload device switches off the pump. When the pump cools down, the motor automatically restarts. Isolation valve seals the inlet to prevent oil and air contamination of the system in the event of power failure.

Supplier: LABCONCO

This mobile equipment table may be used to transport heavy equipment and to provide auxiliary bench space. With height adjustments from 28,75 to 35,75", it may be raised to the same height as most laboratory benchtops. Solid epoxy work surface, powder-coated square tubular steel frame.

Supplier: LABCONCO

This system uses nitrogen blow down, vortex motion and heat to speed evaporation of up to 48 small samples or eight 450 milliliter samples at once.

Supplier: LABCONCO

This glove box provides a leak-tight environment for work with contamination-sensitive materials.

Supplier: LABCONCO

These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Supplier: LABCONCO

Flexible duct connections reduce vibration between the blower and PVC ductwork.

Supplier: LABCONCO

Glassware washing machines, Culture tube insert 10 - 12 mm

Supplier: LABCONCO

Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Supplier: LABCONCO

Storage cabinet accessory, Protector®, Interior shelf kit with PVC tray for 762 mm protector acid storage cabinets

Supplier: LABCONCO

The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

Supplier: LABCONCO

SpillStopper work surface, right rear cupsink cutout, 1219×914×32 mm, 54 kg, For: Laboratory Hoods, Protector®

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Supplier: LABCONCO

Purifier Logic+ Class II, Type B2 biosafety cabinets provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

Supplier: LABCONCO

Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).