Supplier: GERHARDT

Distillation System, Automatic, pH-combined electrode KCL, require regularly filling with KCL

Supplier: GERHARDT

Complete units including a integrated heat shield and glass exhaust manifold, insert rack and digestion tubes.

Supplier: GERHARDT

VAPODEST® 200 is the ideal instrument for distillation of volatiles, SO₂, alcohol and phenol.

Supplier: GERHARDT

COD/SMA tube SMG, 250 ml, with KS 40 (for automatic COD units)

Supplier: GERHARDT

Traditional Kjeldahl digestion units for flask sizes from 50 to 750 ml.

Supplier: GERHARDT

Serial flask heaters for six flasks with a volume of either 50 - 250 ml or 250 - 750 ml.

Supplier: GERHARDT

These high-precision, programmable digestion units are ideal for Kjeldahl digestion in 100, 250 or 400 ml digestion tubes. Depending on the sample volume, you can choose between 8-, 20- or 40- place systems.

Supplier: GERHARDT

Made of borosilicate glass.

Supplier: GERHARDT

With six plates in a row. For temperatures up to 425 °C.

Supplier: GERHARDT

Kjeltab ST, 3,5 g, Contents: K₂SO₄ 3,5 g; Se 0,0035 g, Ø: 16 mm

Supplier: GERHARDT

The VAPODEST® 400 and 450 are designed with extended funtionality to allow easy, comfortable operation of Kjeldahl analysis.

Supplier: GERHARDT

TZ-Control is a time-temperature controller - easily programmed for automated operation of the Kjeldatherm, Kjeldalift- and COD and SMA-digestion units, mounted on the side of the system. This feature ensures optimal control of the heating up phase, the digestion phase, as well as cooling. The fume scrubber Turbosog can also be turned on and off automatically.

Supplier: GERHARDT

Plate and housing in stainless steel.

Supplier: GERHARDT

The COD system is controlled by a digital electronic temperature controller to a precision of 1 K. The heating up phase of the the samples to ~148 °C is achieved in less than 10 minutes.

Supplier: GERHARDT

HDPE, Capacity: 10 l

Supplier: GERHARDT

VAPODEST® 300 is the ideal rapid water steam distllation instrument for Kjeldahl distillation. All glass components involved in the distillation process are back-lit for visual process control at any time.

Supplier: GERHARDT

An automatic acid hydrolysis system for fat determination according to Weibull-Stoldt where the complete digestion and filtration process runs in a closed system.

Supplier: GERHARDT

Exhaust system for Kjeldahl mineralisation units.

Supplier: GERHARDT

For rapid determination in accordance with Weender, Van Soeste et al. Use fine mesh bags to weigh the sample. A glass diffuser is then placed inside the bag, allowing the reagents to diffuse freely. Six samples can be processed simultaneously: clean, boil in sulphuric acid, rinse, boil in KOH, rinse again and dry.

Supplier: GERHARDT

Orbital Shaker, Universal tray for 30× 50-100 ml Erlenmeyer flasks

Supplier: GERHARDT

Heating plate

Supplier: GERHARDT

This distribution head is made from glass. It prevents that any sample residue gets into the receiver.

Supplier: GERHARDT

Automated processing of the boiling and filtration steps for the crude fibre, ADF and NDF determination. Ideal for laboratories with high sample throughput.

Supplier: GERHARDT

A fully automatic distillation system with integrated titration for precise analysis. The automated steam generator has steam output that can be set between 40 to 100%, and allows for all current procedures. In addition the system provides control of cooling water, sample tube and chemical tank as well as some safety features to protect the operator. The titration unit is fully integrated for the evaluation of the analysis using a potentiometric, automatic, end-point recognition.

Supplier: GERHARDT

Two level apparatus for six mineralisations and six distillations.

Supplier: GERHARDT

Kjeldahl distillation system, Accessory, Water jet pump

Supplier: GERHARDT

This distillation condenser glass has a connecting piece for the ventilation valve.

Supplier: GERHARDT

Distillation system, Kjeldahl, Manual, KI 12/26, Array: 6, Flask capacity: 750 ml

Supplier: GERHARDT

SOXTHERM® units are automatic and fully programmable extraction equipment for the determination of fat in foodstuffs, including dairy, cereals, fruit, meat, and chocolate. In addition, the Soxtherm can be used as an early stage extraction process in the determination of pollutants in environmental samples, such as pesticides, PCB, phenols, dioxins and additives for plastics. The equipment has been designed to handle volatile solvents safely and economically. The safety features also include a glass front door that opens and closes automatically upon start or end of programme and illuminated glass beakers, which allow easy visual inspection of the extraction progress.

Supplier: GERHARDT

Insert racks made of stainless steel.