"Batch Pressure Filter Cloth"

Supplier: Sartorius

Filter, centrifugal

Supplier: Sartorius

Filter holder, PTFE, 200 ml, For Ø: 47 mm

Supplier: ENTEGRIS

These filters are compatible with high purity gases as well as general nitrogen and CDA applications. Available in Bronze and Silver performance levels, they are specifically designed for high flow and low delta pressure applications and provide ultimate process protection by removing contaminants that could affect process quality.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: VICI JOUR RESEARCH

The stainless steel in-line filter has virtually no dead volume and can be used in various applications without significant band broadening or loss of efficiency. This version is intended for analytical use between the autosampler injection valve and the column.

Supplier: Sartorius

Filter, centrifugal

Supplier: UPCHURCH SCIENTIFIC

Low pressure inline filters offer excellent protection for any low pressure application.

Supplier: PEAK SCIENTIFIC

The PG28L gas generator is suitable for laboratory detectors requiring CO₂ free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.

Supplier: Cytiva (Formerly Pall Lab)

Nylon 6,6 membranes for fluid filtration in the pharmaceutical, biotechnology, electronics, food and beverage industries and for analytical applications. These membranes are very resistant to mechanical, chemical and thermal stress. They can be used in either direction, are inherently hydrophilic, have high flow rates, low pressure drops and very low extractables. Where appropriate, they can be steam sterilised without change in flow or pore size characteristic.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: Cytiva (Formerly Pall Lab)

Filter holder designed for particulate filtration of small volumes (10 to 100 ml) using a syringe as final filter in gas filtration systems.

Supplier: Bohlender

Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Supplier: Avantor Fluid Handling

Prevent leaks with the emergency shutdown design.

Supplier: Sartorius

The filter holder has been designed for in-line filtration.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

This microfibre cloth (80% polyester, 20% polyamide) has an open structure and is therefore ideal for cleaning heavily fouled surfaces.

Supplier: KIMBERLY CLARK

This highly absorbent multipurpose cleaning and polishing cloth made from microfibre can be used wet or dry. It is effective in trapping and removing particulate matter from a variety of surfaces.