171268 Results for: "Batch Pressure Filter Cloth"

Supplier: Bohlender

Valve made from PPS with flow body made from PTFE. Can be used as a pressure relief valve with adjustable control of pressure or as a valve to prevent a fall in pressure during the filling process. Flow body with 2 GL 18 threaded connectors and valve with toggle for manual venting by tightening, set screw and lock nut to adjust and fix the application pressure in the range from 0,1 to 10 bar (factory setting 1,5 bar).

Supplier: PGI NONWOVEN

This reusable cloth is constructed with a unique, open, wavy texture that enables efficient pick up of all types of dirt particles. Designed to provide the ultimate cleaning, wherever hygiene is crucial and HACCP-standards need to be maintained. Ideal for use in food environments.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: CONTEC

These polyester cloths are ideal for the surface preparation prior to painting. Also suitable for particle removal in printed circuit board manufacturing and for eliminating solvents in some applications.

Supplier: Essity

Strong and durable cloth wipes for use in a variety of environments, softness and flexibility mean wipes are excellent for cleaning, wiping and polishing even in confined spaces.

Supplier: Essity

Cellulose/PP/polyester, reusable. These low-linting and textured cloths have been specially designed for heavy-duty cleaning and degreasing tasks.

Supplier: KIMBERLY CLARK

WYPALL® X80 Cloth is fast absorbing thanks to the unique non woven HYDROKNIT® material. These bulky, reusable cloth-like wipes have an excellent absorption capacity.

Supplier: Cytiva (Formerly Pall Lab)

Supor® hydrophilic polyethersulfone (PES) membrane, acrylic housing: 0,2 µm vent. Positive pressure filtration of aqueous laboratory solutions. For sterilisation or clarification of up to three litres of serum-free cell and tissue culture media, media additives and other aqueous solutions. Ideal for sterilisation of solutions that tend to foam when filtered under vacuum.

Supplier: Heidolph Instruments GmbH & Co.KG

The cassettes can be replaced while the device is pumping. The contact pressure of the rollers is adjusted by means of an adjusting screw. Tubes of various materials and sizes can be inserted in any cassette.

Supplier: Cytiva (Formerly Pall Lab)

Filter holder, Viton O-ring

Supplier: Sartorius

Filter holder, Barrel for pressure holder

Supplier: Sartorius

Filter holder, PTFE, 200 ml, For Ø: 47 mm

Supplier: Cytiva (Formerly Pall Lab)

This 47 mm pressure filtration funnel features a stainless steel construction that offers excellent chemical resistance. Convenient hand tightening makes filter changing easy.

Supplier: VICI JOUR RESEARCH

The stainless steel in-line filter has virtually no dead volume and can be used in various applications without significant band broadening or loss of efficiency. This version is intended for analytical use between the autosampler injection valve and the column.

Supplier: Bohlender

Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Supplier: UPCHURCH SCIENTIFIC

Low pressure inline filters offer excellent protection for any low pressure application.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Sartorius

The filter holder has been designed for in-line filtration.

Supplier: Cytiva (Formerly Pall Lab)

Nylon 6,6 membranes for fluid filtration in the pharmaceutical, biotechnology, electronics, food and beverage industries and for analytical applications. These membranes are very resistant to mechanical, chemical and thermal stress. They can be used in either direction, are inherently hydrophilic, have high flow rates, low pressure drops and very low extractables. Where appropriate, they can be steam sterilised without change in flow or pore size characteristic.

Supplier: PEAK SCIENTIFIC

The PG28L gas generator is suitable for laboratory detectors requiring CO₂ free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.

Supplier: ENTEGRIS

These filters are compatible with high purity gases as well as general nitrogen and CDA applications. Available in Bronze and Silver performance levels, they are specifically designed for high flow and low delta pressure applications and provide ultimate process protection by removing contaminants that could affect process quality.

Supplier: Cytiva (Formerly Pall Lab)

Filter holder designed for particulate filtration of small volumes (10 to 100 ml) using a syringe as final filter in gas filtration systems.

Supplier: Avantor Fluid Handling

Prevent leaks with the emergency shutdown design.

Supplier: Cytiva (Formerly Pall Lab)

Designed to provide bacteria-free air (HEPA: High Efficiency Particulate free Air) for sterile applications. Porous membrane delivering high airflow rates at low differential pressure and extends filter life.

Supplier: Sartorius

Filter holder, Pressure spring, For: Syringe filter holders

Supplier: Sartorius

These filter papers are used for routine analyses like clarification, determination of substances, but also as discs with a center hole for technical applications. Grades with a wet burst resistance >30 kPa are referred to as wet-strengthened and are therefore
suitable for pressure or vacuum filtration.

Supplier: VICI JOUR RESEARCH

In-line filter, PEEK, Pk: 1

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

This microfibre cloth (80% polyester, 20% polyamide) has an open structure and is therefore ideal for cleaning heavily fouled surfaces.

Supplier: KIMBERLY CLARK

This highly absorbent multipurpose cleaning and polishing cloth made from microfibre can be used wet or dry. It is effective in trapping and removing particulate matter from a variety of surfaces.

Supplier: Zellstoff-Vertriebs-GmbH & Co. KG

These high-quality viscose fleece wipes with textile characteristics are suitable for wet and dry cleaning. The cloths are very soft and yet lint-free, they can absorb large amounts of liquid, remain tear-resistant and meet food safety requirements. Multitex® cloths can be washed out after cleaning, wrung out, and reused.