1846 Results for: "\u0141a\u017Anie+ze+zdejmowanym+cyrkulatorem"

Supplier: 3M

Spray cleaner for a stainless steel but can be also used on a range of surfaces including chrome, brass, aluminium, anodised metal surfaces, plastic and enamel. Cleans and protects stainless steel surfaces in one operation, prevents oxidation and fingerprints.

Supplier: LEICA HISTOLOGY

Parafree stainless steel base moulds offer higher walls than other base moulds in the market, eliminating excess paraffin build-up around the block. The unique design produces paraffin blocks that require 80% less block scraping before sectioning.

Supplier: Polyplus-transfection

The FectoPRO® Transfection Kit is specifically designed for enhanced Transient Gene Expression (TGE) in suspension CHO and HEK-293 cells in various serum-free media, using low DNA amount (<1 μg/ml of cell culture).

Supplier: VACUUBRAND

These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: BURKLE

For sampling bulk goods, cross-sectional samples can be taken from different sample depths. Suitable for use with a range of sample substrates from fine powder to coarse grain. Multi sampler has three or five separate chambers for taking samples at multiple depths in one action. Uno sampler has one chamber for taking a sample at one specified depth. All layer sampler has no chambers, three or five inlets and this allows one sample to be taken at multiple depths. Jumbo sampler has no chambers and three, five or seven inlets; with a 50 mm tube diameter this is ideal for larger grain sizes and quantities.

Supplier: KARTELL

PP, transparent, with 2 hose attachments, 8 mm Ø. Ideal for ventilating or transferring air, gases or liquids in a container with a normal ground joint sleeve.

Supplier: Texwipe

The ITW Texwipe® Mini AlphaMop™ isolator cleaning tool is designed to clean isolators, biosafety cabinets, glove boxes and laminar flow hoods. The mop has a low, flat profile and rounded corners. It is made from Celcon® plastic and is totally autoclavable. The swivel joint allows the user to reach difficult-to-access areas. The replaceable foam pad ensures that the mop cover conforms to the surfaces being cleaned. 129-0273 includes two handles, 12 and 18'' (30,4 and 45,7 cm), and is easily used with one hand.

Supplier: Whatman products (Cytiva)

Can be used for the rapid determination of pH values has led to many applications in laboratories and industry.

Supplier: NEXOPART

These test sieves are suitable both for hand sieving as for dry and wet sieving with all Haver test sieve shakers. Bulk material of different branches can be classified and separated with these test sieves; industrial rocks and minerals, food, glass, ceramic, granulates, powders, fertilizer, etc.

Supplier: Avantor Fluid Handling

Masterflex Air Regulator with Lubricator 1 * 1 items

Supplier: OHAUS

The Scout® SKX series has been designed for education applications. The overload protection and large backlit LCD, backed by education software makes the Scout® the ideal balance for the classroom. The integrated transportation lock protects the load cell from damage during stacking storage and transportation. Can be used either in battery-powered mode (4× AA batteries, not included) or via the AC adapter, with power saving auto shut-off function and low battery indicator. The SKX123 has an ingenious draught shield with an easy to remove top cover piece.

Supplier: VWR Collection

These thermo-hygrometers are ideal for routine measurements, monitoring 'round the clock', all quality control needs, and critical experimental requirements. Perfect for use in hoods, classrooms, stockrooms, environmental chambers and chemical storage areas.

Supplier: Charles River Laboratories Cell Solutions

CD34⁺ cells are isolated using positive immunomagnetic cell separation procedures from bone marrow. Bone marrow aspirates and cells, drawn from the posterior iliac crest using a syringe containing anticoagulant, are collected from normal human volunteers using institutional review board (IRB) approved procedures.

Supplier: Thermo Fisher Scientific

Heratherm refrigerated incubators feature Peltier technology which maintains sample integrity at temperatures from 5 to 70 °C, very low energy consumption and they never need defrosting. Peltier technology ensures temperature uniformity and stability with minimal disruption due to vibrations. The compact units have a stainless steel interior, large clear vacuum fluorescent display and an internal glass door for viewing samples safely.

Supplier: SI Analytics

Magnetic valve extention set for waste line VZ 7160. For aggressive media! Attention: For each measuring position one of these sets is required. Scope of delivery: required magnetic valve with all necessary tubes and connections to extend the measuri 1 * 1 items

Supplier: DWK Life Sciences

This standard cell production roller culture apparatus allows flexibility for scale-up and production of monolayer cell cultures in standard roller bottles. The system consists of a base drive unit and five-position roller deck to which additional roller decks can be added. A powerful DC motor, with soft-start speed control, drives the bottles through a series of durable non slip belts. The all-position drive is a positive traction drive system for lightweight plastic bottles, in which each roller is individually driven.

Supplier: LAUDA

Baths/circulation thermostats with plain text menu navigation which are ideal for user friendly operation.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, C-425 frit, Porosity: 0,5 µm, Thickness: 0,71 mm, Frit Ø ext.: 1,0 mm, Frit volume: 0,1 µl, Frit material: Stainless steel, Ring ext. Ø: 4,87 mm, Ring material: PCTFE

Supplier: MACHEREY-NAGEL

Unmodified HPTLC silica layers with concentrating zone for HPTLC.

Supplier: Lenz Laborglas GmbH & CO.KG

DURAN®, borosilicate glass, clear. With standard ground joint and hexagonal glass stopper.

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: NABERTHERM

The BO series is specially designed for processes in which larger sample quantities must be incinerated. Mainly used in the fields such as ashing of food, thermal cleaning of injection molding tools or determination of annealing loss.

Supplier: VWR Collection

Stainless steel baths with user friendly MX temperature controller plus three control buttons and on-screen prompts. Baths can be used for external closed loop circulation. The controller rests on a chemically resistant DuraTop™ deck, which is cool to the touch, even when working at high temperatures, and units feature LidDock™ lid stowing system. Cool Command™ technology regulates the amount of cooling required, saving energy while providing rapid cooling and precise control at elevated temperatures.

Supplier: VWR Collection

PolarSafe Dots are made from chemically inert polyester with a unique adhesive formulated to adhere to laboratory glass and plastic ware. These dots will not only withstand conventional freezing (−80 °C) but can also be used for most cryogenic storage applications (vapour phase nitrogen storage at −196 °C). No need for separate labelling solutions for your cryo-preservation units and your ultra low freezers. The labels can even be used in incubators. PolarSafe Dots do not require self lamination to be effective. The sleeker labels mean your tubes will still fit most storage systems without the label sticking or being torn off. The wide range of sizes allow you to label your whole experiment permanently, from micro-centrifuge tube to cryovial, microtiter plate to storage boxes.

Supplier: VWR Collection

Stainless steel circulating baths with choice of Advanced Programmable or Advanced Digital temperature controller. Both are easy to navigate with large, intuitive displays and multiple communication options including USB-A and B, RS232/485, Ethernet and external temperature probe. The reservoir drain can be accessed by removing the front panel. All models feature user-adjustable high temperature safety cut-off points as well as over-temperature protection. The DuraTop™ surface is cool to the touch even when operating at high temperatures.

Supplier: VWR Chemicals

Validation of aseptic processing should include a simulation test using a nutrient medium, known as the media fill or media simulation test. The selection of the nutrient medium should be made based on the quantity of the product produced, and the selectivity, clarity, concentration and suitability for sterilisation. The process simulation test should imitate, as closely as possible, the routine aseptic manufacturing process, and include all the critical subsequent manufacturing steps. Normally process simulation tests should be repeated twice a year per shift and process. The number of containers used for media fills should be sufficient to enable a valid evaluation. For small batches, the number of containers for media fills should at least equal the size of the product batch.

Supplier: Corning

High optical quality, glass bottom black microplates are ideal for performing high-content cell-based assays using imaging systems. The glass bottom provides a flat and optically clear surface that reduces autofocus time, increases throughput, and is ideal for cell growth.

Supplier: Agilent

Pre-aligned fused-silica capillaries from Agilent Technologies are designed and optimised for ease of use and reliability. All capillary ends are cut to a smooth, mirror-like finish. In addition, the polyimide outer coating is removed from the ends. These processes ensure minimal sample adsorption and help maintain sharp peak shapes. All capillaries have a pre-made detection 'window' and a built-in alignment stopper that allows rapid and precise insertion in the alignment interface.

Supplier: Binder

These drying ovens for limited quantities of solvents, have high temperature accuracy and silicone- and dust-free stainless steel chambers. Units are widely used for applications such as quality assurance of paints or other liquid coatings. FDL ovens feature an MP controller with adjustable ramp function and integrated weekly program timer with real time function.