About this item
Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.
Chemistry vacuum systems
These chemistry vacuum systems offer the advantage of practical, ready to connect delivery because individual components have already been optimised for use together
ATEX approved chemistry diaphragm pumps included
Inlet separator (AK) as particle protection and for collecting liquid droplets
Emissions condenser (EK) for efficient recovery of solvents to protect the environment and for economical recycling
Components optimally adapted to one another
Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment.
The chemical vacuum systems are delivered fully assembled with the MZ 2C EX or MD 4C EX pump, the pump support, suction precipitator (AK), emissions condenser (EK), switch and 2 m cable (without plug).
Specifications
- Catalog No:
- 181-1153
- VACU22614250
- 181-1151
- 181-1152
- 181-1150
- 181-1149
- Model:
- MV 10C EX
- MV 10C EX+AK+EK
- MD 4C EX
- MD 4C EX +AK +EK
- MZ 2C EX +AK +EK
- MZ 2C EX
- No. of stages:
- 4
- 4
- 3
- 3
- 2
- 2
- Flow rate:
- 135 l/min
- 135 l/min
- 62 l/min
- 62 l/min
- 32 l/min
- 32 l/min
- Ultimate total vacuum without gas ballast:
- 2 mbar
- 2 mbar
- 3 mbar
- 3 mbar
- 12 mbar
- 12 mbar
- Final pressure with gas ballast:
- 10 mbar
- 10 mbar
- 10 mbar
- 10 mbar
- 18 mbar
- 18 mbar
- Connection on pressure side (EX):
- Small flange DN 16
- Hose nozzle DN 8 - 10 mm
- Small flange DN 25
- Hose nozzle 10 mm
- Hose nozzle 10 mm
- Small flange DN 16
- Connection on suction side (IN):
- Small flange DN 25
- Small flange KF DN 25
- Small flange DN 16
- Small flange DN 25
- Small flange DN 16
- Small flange DN 16
- ATEX approval:
- Pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex d IIB T4 Gb - Pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex d IIB T4 Gb - Pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex d IIB T4 Gb - Pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex d IIB T4 Gb - Pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex d IIB T4 Gb - Pumping chamber (pumped gases):
II 2G Ex h IIC T3 Gb X
environment (without inert purge gas):
II 3G Ex h IIB T4 Gc X
environment (with inert purge gas):
II 2G Ex h IIB T4 Gb X
motor: II 2G Ex d IIB T4 Gb
- Motor output:
- 0,5 kW
- 0,5 kW
- 0,25 kW
- 0,25 kW
- 0,15 kW
- 0,15 kW
- W×D×H:
- 560×430×410 mm
- 649×525×452 mm
- 265×440×305 mm
- 365×600×420 mm
- 357×308×470 mm
- 287×337×251 mm
- Weight:
- 63,2 kg
- 64 kg
- 29,3 kg
- 37,4 kg
- 24,5 kg
- 21,6 kg
Specifications
Related Information
AP_100L_ATEX_oGB_mGB MB_md_4c_ex MB_md_4c_ex_akEk MB_mv_10c_ex MB_mz_2c_ex