Accessories for glove boxes, Precise™
: LABCONCO
Product Family Options
Evacuation and filling
- Description
- Automatic pressure controller for 230 V units, incl. mounting bracket, hardware, 3/16" ID polyvinyl tubing, 3/32" ID polyvinyl tubing, and power cord, for automatic control of the main chamber pressure, main chamber purging and filling cycles, and transfer chamber evacuation and filling cycles1 * 1 SZT40 420 zł
- Manual valve gas and vacuum tubing connection kit, with flexible vinyl tubing and fittings necessary to connect user-supplied inert gas supply tank and rotary vane vacuum pump to valves located on the glove box1 * 1 SZT1 290 zł
- Gas and vacuum tubing connection kit, automatic pressure controller, with flexible vinyl tubing and fittings necessary to connect user-supplied inert gas supply tank and rotary vane vacuum pump to valves located on the glove box1 * 1 SZT1 410 zł
- Add-A-Valve kit, incl. manual ball valve, compression fitting, hose connector fitting, O-ring and nut to add a service valve to the main chamber or transfer chamber; requires installation and Ø 0,688" hole1 * 1 KIT1 910 zł
Pressure relief
- Description
- HEPA-filtered pressure relief vent kit, with 99,99% efficient HEPA filter; for ducting to the outside or room; may be used with 5241200 carbon-filtered vent kit1 * 1 SZT5 760 zł
- Carbon-filtered pressure relief vent kit, incl. activated carbon filter, for ducting to outside or room; may be used with 5238500 HEPA-filtered pressure relief vent kit1 * 1 KIT9 680 zł
- Pressure relief valve vent kit for exhaustig the pressure relief valve during overpressurization, incl. 3,9" OD × 3,8" ID thimble connection, gasket, two elbows, four clamps and 13" long tubing (Ductwork for outside venting and 5230600 Pressure Relief Valve are required but not included)1 * 1 SZT2 840 zł
Moisture and oxygen monitoring
- Description
- Moisture monitor/hygrometer for placement inside the main chamber to continuously monitor moisture levels and absolute moisture content in gas (0 - 10000 ppm); consists of chemically inert ceramic technology moisture sensor, sampling block, digital display monitor, sampling pump, switching power supply and on/off switch, for 230 V units1 * 1 SZT50 670 zł
- Digital hygrometer, handheld, measures both percent relative humidity from 0-100% and temperature in ° F/° C; incl. 9 volt alkaline battery1 * 1 SZT10 370 zł
- Oxygen monitor, dor detecting trace oxygen levels using an electrochemical sensor; digital readout in three measurement ranges of 0-100 ppm, 100-1000 ppm and 1000-10000 ppm, for 230 V units1 * 1 SZT46 010 zł
- Oxygen monitor for 115/230 V, measures percent of oxygen (0,1 - 100 %) inside the glove box using a chemically resistant electrochemical sensor, incl. interconnecting sensor cable and power cord for connection to the glove box’s interior electrical receptacle1 * 1 SZT14 320 zł
- Exterior oxygen monitor tubing kit (For use with Oxygen Monitor 5244500 and 5244501)1 * 1 SZT1 290 zł
- Exterior oxygen monitor tubing kit (For use with Moisture Monitor 5244900 + 5244901)1 * 1 SZT1 290 zł
Low oxygen and moisture level removal
- Description
- Oxygen and moisture removal column, for reduceing the oxygen level to less than 5 ppm and moisture level to less than 50 ppm; requires connection to two manual valves on the main chamber and a diaphragm vacuum pump for atmosphere oxygen/moisture removal and recirculation1 * 1 SZT15 450 zł
- Support stand for oxygen and moisture removal column1 * 1 SZT840 zł
- Oxygen and moisture removal tubing kit, incl. 25' fluorinated ethylene propylene (FEP) tubing, eight tube inserts and two connectors to connect the Oxygen and Moisture Removal Column to diaphragm pump1 * 1 SZT3 110 zł
Drying train accessories
- Description
- Canister with stand for holding any trap insert, clear polypropylene canister allows visual inspection of trap contents1 * 1 SZT2 570 zł
- Drying train tubing kit, incl. 25' fluorinated ethylene propylene (FEP) tubing and eight tube inserts to connect drying train components1 * 1 SZT2 290 zł
- Flowmeter, for inline drying train connection to provide visual confirmation of drying train circulation1 * 1 SZT
- Gas and vacuum 0,2 µm filter, traps particulates; for drying train or vacuum pump exhaust; 0,25" - 0,38" ID1 * 1 KIT2 400 zł
- Diaphragm pump for drying train circulation, for 230 V units, 35 l/minute displacement capacity1 * 1 SZT9 470 zł
- Drying train, with 1 molecular sieve column, 220 V, 50/60 Hz1 * 1 SZT21 100 zł
- Drying train, with 2 molecular sieve columns, 220 V, 50/60 Hz1 * 1 SZT30 440 zł
General accessories
- Description
- Flat work surface, black epoxy resin, may be placed atop two Protector Standard Base Cabinets to support Precise™ glove boxes, 1524×762×31,75 mm1 * 1 SZT
- Electrical pass-through kit, provides a leak-tight connection for data transfer to a printer or computer; incl. sealed 9 pin connector (D-subminiature with male pins on one side and female pins on the other) and 10' cord; requires installation and drill hole; Installation Kit 5241100 is recommended1 * 1 KIT1 040 zł
- Electrical power strip, UK-plug, 250 volts, 2 amps, 6 receptacles1 * 1 SZT2 170 zł
- Ionizer fan, anti-static, for 230 V units, 50/60 Hz operation1 * 1 SZT8 780 zł
- Viewing window, acrylic (749×396×12,7 mm) with dry powder epoxy-coated steel frame, replaces standard laminated glass window1 * 1 SZT4 310 zł
- Electrical 9-Pin Pass-Through installation kit, incl. drill bits and holesaws for installing 5075619 Electrical 9 Pin Sealed Pass-Through1 * 1 SZT1 020 zł
- Electrical power strip, EU-plug, 250 volts, 2 amps, 4 receptacles1 * 1 SET2 100 zł
Storage accessories
- Description
- Bottle holder, epoxy-coated steel, with 3" diameter opening, holds a squirt bottle or other round container1 * 1 SZT395 zł
- Tissue holder, epoxy-coated steel, accommodates a box of tissues in the upside down or upright position; opening in the holder permits wipes to be dispensed from the bottom1 * 1 SZT566 zł
- Rear shelf kit, incl. four stainless steel shelves and epoxy-coated steel vertical uprights, with stainless steel slotted back for mounting Hanging Shelf Kits (sold separately); assembled dimensions: 563,88×508×111,76 mm1 * 1 SZT2 690 zł
- Left side shelf kit, incl. four stainless steel shelves and epoxy-coated steel vertical uprights, for storage in left side of the main chamber to maximise space; assembled dimensions: 538,48×508×111,76 mm1 * 1 SZT2 570 zł
- IV bar kit for supporting intravenous solution bottles and bags, incl. 21.2" long stainless steel bar, mounting hardware and four snap hooks; requires Shelf Kit 5235000 or 5235001 (not included)1 * 1 SZT840 zł
- Exterior transfer chamber shelf, dry powder epoxy-coated steel shelf, 271,78×383,54, for mounting to top of transfer chamber to maximise exterior work area1 * 1 SZT626 zł
- Hanging organizer bin (137,16 mm), plastic, container holds miscellaneous small items1 * 1 SZT43,30 zł
- Hanging organizer bin (187,96 mm), plastic, container holds miscellaneous small items1 * 1 SZT66 zł
Recommendations
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.



