You searched for: Chromatography Standards

Supplier: PerkinElmer

This test film is an easy-to-use standard to check frequency, accuracy and any changes.

Supplier: PerkinElmer

DSC Standard, Reference material, Perkalloy, Diamond™

Supplier: Agilent

Standard for Liqid Chromatography, OQ/PV sample for dissolution test, 150 mg/l, caffeine in water, 500 ml

Supplier: Agilent

OQ/PV headspace sample standard contains 0,2 to 0,3% t-butyl disulphide, 1,2-dichlorobenzene, and nitrobenzene in ethanol.

Supplier: Agilent

Size Exclusion Standard, AdvanceBio SEC 300Å Protein Standard, lyophilized, 1.5 mL

Supplier: VARIAN

The EasiCal system for organic solvents consists of two different combs, each with ten detachable spatulas supporting a mixture of five polymer standards with MWs selected to provide equidistant calibration points for greater accuracy.

Supplier: VARIAN

These hydrophilic polymers are suitable for both aqueous SEC and organic GPC using the majority of polar organic solvents. The two types are chemically similar that can be used together across a wider molecular weight range with aqueous and organic polymers.

Supplier: Merck

Standard samples for HPLC System Qualification.

Supplier: Merck

Reference substances can be used for the identification of unknown compounds in a gas chromatogram or as standards in quantitative GC analysis. They serve also for the characterisation of GC column properties.

Supplier: VARIAN

Polystyrene standards for many organic solvents either for conventional GPC column calibration or for calibrating light scattering and viscosity detectors that provide equidistant calibration points for greater accuracy.

Supplier: VARIAN

Polymethylmethacrylate (PMMA) standards are extremely versatile as they can be used for organic GPC with a wide range of medium polarity eluents, such as tetrahydrofuran, toluene, methyl ethyl ketone and ethyl acetate.

Supplier: VARIAN

The quickest and most convenient method to deliver an accurate 12 point column calibration for organic and aqueous GPC/SEC column calibration.

Supplier: LGC Standards PROMOCHEM

NIST-1921B, Polystyrene film - IR transmission wavelength

Supplier: Merck

HPLC Standard, Reversed Phase Test Mix 2, TraceCERT®, Supelco®, in acetonitrile: water (varied conc.) solution, Certified reference material, Pk Info: ampule of 1 mL

Supplier: Merck

Set contains 12 different polystyrene standards with Mp ~374, ~1620, ~3420, ~9130, ~18100, ~32500, ~67500, ~128000, ~246000, ~659000, ~1000000, ~2180000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations.

Supplier: Merck

Set contains 10 different polyethylene glycol/polyethylene oxide standards with Mp ~194, ~970, ~2010, ~4450, ~15000, ~22100, ~62000, ~217000, ~490000, ~1190000; always 3 or 4 standards are lyophilised in a 1,5 ml vial (black, blue or yellow); for 1 complete calibration use one of each of the black, blue and yellow vials; 1 set contains 30 vials for 10 complete calibrations.

Supplier: Merck

GPC Standard, Polystyrene, average Mw 290000 (typical), average Mn 130000 (typical), Supelco®, Analytical standard

Supplier: Merck

GPC Standard, Poly(vinyl chloride), average Mw 85000 (Typical), average Mn 40000 (Typical), Supelco®, Analytical standard

Supplier: Merck

Poly(methyl methacrylate) is a rigid and transparent type of polymer material. It is obtained via polymerization of methyl methacrylate monomer.

Supplier: Merck

Set contains 12 different polyethyleneglycol standards with Mp ~106, ~330, ~420, ~600, ~1500, ~2010, ~3120, ~6240, ~8600, ~12000, ~23000, ~40000; always 4 standards are lyophilised in a 1,5 ml vial (green, red or white); for 1 complete calibration use one of each of the green, red and white vials; 1 set contains 30 vials for 10 complete calibrations

Supplier: Merck

GPC Standard, Mw 159,000 (Typical), Supelco®, Glass bottle

Supplier: LGC Standards PROMOCHEM

This Standard Reference Material (SRM) is intended for use in the evaluation of equipment, and the validation of methodology used to measure electrophoretic mobility.

Supplier: Agilent

GC column test standards contains components that test the column for resolution characteristics, efficiency and inertness.

Supplier: Agilent

Standard for GC, MIDI system calibration standard

Supplier: Merck

GPC Standard, Poly(lauryl methacrylate) solution, Mw 570000 (Typical), average Mn 290000 (Typical), Supelco®, 25 wt. % in toluene, Analytical standard

Supplier: Merck

GPC Standard, ~2613000 Mw, Mw/Mn ~1,2, Supelco®

Supplier: Merck

HPLC Standard, Reversed Phase Test Mix, in methanol: water (3:2) (varied conc.), TraceCERT®, Supelco®, Certified reference material, Pk Info: ampule of 1 mL

Supplier: Merck

GPC Standard, Poly(acrylic acid), average Mn 130000 (Typical), Supelco®, Analytical standard

Supplier: Merck

Poly(ethylene glycol) is the most widely used non-ionic, hydrophilic polymer, which can find wide applications in biomedical industry such as in drug delivery systems.

Supplier: Agilent

AdvanceBio SEC Protein Standards are uniquely designed for AdvanceBio SEC columns. The standards are manufactured from a select group of proteins and peptides optimized to deliver accurate, precise quantitation for mAb aggregation and protein analysis.