Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: Merck

Plug, 400-P, 6,35 mm, Brass

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

MarvelX biocompatible PEEK-lined stainless steel UHPLC connection system is easy to use and eliminates dead volume. It also provides higher repeat uses without sacrificing from consistent performance.

Supplier: Agilent

These fittings for Shimadzu HPLC systems provide leak-free connections and prevent the loss of peak shape and resolution.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: Agilent

These splitters are used for splitting an injected sample from a single injector into two columns and on to two detectors.

Supplier: HWS LABORTECHNIK

Metal adapter, M 16×1 thread, with A execution, Metal

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: OMNIFIT

Connecteurs, Connector, 2-way, 1,5 mm bore

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: Agilent

Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.

Supplier: VICI JOUR RESEARCH

PEEK two-piece fingertight fittings. Fits any 10 to 32 fitting. Works with any ¹/₁₆'' OD tubing.

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Thread: 12,7 mm

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: HWS LABORTECHNIK

Metal adapter with PT 100, for flexible metallic tubing.

Supplier: UPCHURCH SCIENTIFIC

These fittings eliminate loosening due to tubing twist.

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-258B, ferrule, ETFE, blue, ETFE

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: GLASWARENFABRIK KARL HECHT

Assembly kit for filtering flasks, with removable plastic hose connection, short and long screw and seals.

Supplier: Agilent

These connectors are equivalent to the PerkinElmer AA versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, U-650, replacement flangeless ferrule, ETFE natural, 1/2-20 flat bottom port, 250 psi, for 1/4" OD tubing, ETFE

Supplier: VICI JOUR RESEARCH

These VICI Jour® nuts incorporate a unique PEEK double ferrule which grips the tubing in two places for added security, especially with PEEK or Tefzel tubing. For virtually any ¹/₁₆'' OD fittings eg. Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch.

Supplier: VICI JOUR RESEARCH

Plugs can be used to close off an unused port in a valve or manifold. Size ¹/₄ - 28".