Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-124H, fitting, micro headless knurl, PEEK blue, 6-32 coned port, for 360 μm OD tubing, 5000 psi, PEEK

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: Agilent

Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: OMNIFIT

Omni-Lok™ inverted cone fittings provide a simple, easy to use low-pressure connection. Only the ETFE cone is in the fluid path.

Supplier: UPCHURCH SCIENTIFIC

PEEK, stainless steel or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: UPCHURCH SCIENTIFIC

ETFE or PEEK.

Supplier: OMNIFIT

Omnifit® threaded adaptors are a useful range of problem solving parts that enable to convert thread sizes quickly and easily, accepting a ¹/₄"-28 UNF male fitting at one end and a range of male and female thread types at the other.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: VICI JOUR RESEARCH

These PEEK adapters connect standard LC fittings to standard LC ports, usable with most common organic and inorganic HPLC solvents without risking corrosion, metal contamination, or protein degradation.

Supplier: VICI JOUR RESEARCH

Fiberglass reinforced PP with PP washers. A number of chromatography systems still require or prefer flanged connections. When the tubing is flanged, the washer never comes in contact with the mobile phase.

Supplier: UPCHURCH SCIENTIFIC

This micro injection port adapter assembly can be connected to 360 µm Ext.Ø capillary tubing to introduce samples. It accepts standard 22 gauge Hamilton-style injection syringe needles. The needle butts directly against the connecting tubing during injections, therefore no additional swept volume is added to the fluid pathway by this adapter.

Supplier: VICI JOUR RESEARCH

These VICI Jour® nuts incorporate a unique PEEK double ferrule which grips the tubing in two places for added security, especially with PEEK or Tefzel tubing. For virtually any ¹/₁₆'' OD fittings eg. Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch.

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: OMNIFIT

Flanged tubing system is used for economical low pressure connection. A flanging washer is placed between the flange and the fitting nut. When screwed into a flat-bottom, the flange is compressesed against the bottom of the port to produce a seal.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. 10-32 threads, for 1/16" tubing. Fingertight up to 350 bar (5000 psi).

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: VICI JOUR RESEARCH

Biocompatible PEEK construction. The unique feature of the VICI Jour® column coupler is that it adjusts to fit all 10-32 fitting types. No matter what the fitting type and pilot length – Valco®, Waters®, Upchurch®, Rheodyne®, etc., the coupler adapts to bottom out in the pilot automatically, consequently creating only small void volumes.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.