You searched for: Nucleic Acid Reagents

Supplier: AAT Bioquest

NED dye qPCR Calibration Solution supplied as a 10000X concentrate is compatible with a wide variety of qPCR instruments, including the ABI7500 Fast, QuantStudio™, and ViiA™ seven systems.

Supplier: FINNZYMES REAGENTS

DyNAmo™ qPCR Kits offer excellent performance in detection and quantitation of DNA and RNA sequences from various sources. The DyNAmo™ qPCR kit family features optimised kits for fast and conventional qPCR. Kits utilising either SYBR® Green or probe chemistries for various platforms are available. All DyNAmo™ qPCR kits are provided as convenient 2X master mixes - only template and primers need to be added.

Supplier: FINNZYMES REAGENTS

Phusion® U DNA polymerase is a novel engineered high fidelity enzyme developed using fusion technology.

Supplier: FINNZYMES REAGENTS

Phusion® Green Hot Start II High-Fidelity DNA Polymerase is a combination of Phusion® Hot Start II DNA Polymerase and 5× Phusion® Green buffers. The buffers include a density reagent and two tracking dyes for direct loading of PCR products on a gel. The coloured buffer does not interfere with excellent performance of Phusion® Hot Start II DNA polymerase and is compatible with downstream applications such as DNA sequencing, ligation and restriction digestion.

Supplier: Cytiva

illustra™ GenomiPhi™ V2 DNA Amplification Kit, part of the Phi29 DNA polymerase family, is for mini-scale genomic DNA preparation. The protocol is simple. A typical DNA yield of 4 to 7 µg DNA can be achieved in less than two hours with limited hands-on time. The average product length is >10 kb. The starting material for GenomiPhi reactions can be purified DNA from any commercial kit or homebrew method, or non purified cell lysate.

Supplier: Cytiva

TempliPhi™ Kits efficiently prepare micrograms of circular DNA from picogram input material. The DNA templates are prepared by rolling circle amplification (RCA) using bacteriophage Phi29 DNA polymerase. TempliPhi™ uses an isothermal method for the exponential amplification of circular DNA. Phi29 DNA polymerase is active at 30 °C, enabling amplification to be performed at this temperature without the need for thermal cycling. The TempliPhi™ protocol requires less than 20 minutes of hands-on time to amplify 96 samples from bacterial colonies.

Supplier: G-Biosciences

SG-Lysine-C™ endopeptidase, from Lysobacter enzymogenes, is a serine protease highly specific in cleaving peptide bonds at the carboxy side of lysine. Highly purified preparations of SG-Lysine-C™ are chemically modified making the enzyme resistant to autolysis and stabilising its enzymatic activity.

Supplier: Cytiva

TempliPhi™ Kits efficiently prepare micrograms of circular DNA from picogram input material. The DNA templates are prepared by rolling circle amplification (RCA) using bacteriophage Phi29 DNA polymerase. TempliPhi™ uses an isothermal method for the exponential amplification of circular DNA. Phi29 DNA polymerase is active at 30 °C, enabling amplification to be performed at this temperature without the need for thermal cycling. The TempliPhi™ protocol requires less than 20 minutes of hands-on time to amplify 96 samples from bacterial colonies.

Supplier: Cytiva

illustra Ready-To-Go GenomiPhi V3 DNA Amplification Kit offers highly efficient and representative whole-genome amplification with 12 to 20 μg yield from nanogram amounts of DNA sample.

Supplier: G-Biosciences

SG-Arginine-C™ endopeptidase (Clostripain, from C. histolyticum) specifically hydrolyses the carboxy peptide bond of arginine. SG-Arginine-C™ has been modified chemically by a propriety process to render the enzyme resistant to autolysis and stabilise enzymatic activity. In addition, as a sulfhydryl enzyme, SG-Arginine-C™ is susceptible to inactivation by oxidation and as a result requires reducing agents for protection. The enzyme also requires calcium ion for maximal activity. A special reconstitution buffer is supplied, which contains reducing agents and activators to maintain enzyme activity.

Supplier: G-Biosciences

SG-Chymotrypsin™ is a serine endopeptidase, which predominantly cleaves peptide bonds on the carboxy side of tyrosine, phenylalanine and tryptophan. In addition, chymotrypsin has a low catalytic activity against the carboxy side of leucine, methionine, alanine, aspartic and glutamic acids. It is therefore recommended to always use the shortest digestion time possible.

Supplier: Cytiva

The illustra™ GenomiPhi™ HY DNA Amplification Kit is part of the Phi29 DNA polymerase family of products. It contains all of the components necessary for genomic DNA preparation by isothermal strand displacement amplification. The product protocol is very simple, and provides typical yields of 40 to 50 μg DNA and average product lengths 10 kb. The starting material for GenomiPhi reactions can be purified DNA or non purified cell lysates.

Supplier: Cytiva

For the amplification of difficult templates for successful DNA sequencing in 18 hours.

Supplier: Abnova

The restriction endonuclease is a restriction endonuclease BspQ I that can recognize specific sites and is produced under GMP standards and expressed recombinantly in Escherichia coli. Restriction endonucleases are widely used in various fields such as gene positioning and cloning. This enzyme cleaves DNA rapidly for efficient gene linearization.

Supplier: Cytiva

Ready-To-Go™ You-Prime First-Strand beads are preformulated, single-dose reaction beads prepackaged in thin-walled 0,5 ml tubes compatible with most thermal cyclers. Ready-To-Go™ You-Prime First-Strand beads are used for synthesis of first-strand cDNA templates from total RNA or polyadenylated RNA using a primer of choice.

Supplier: MILLIPORE

The Montage® _SEQ96 sequencing reaction cleanup kit provides the filtration plate and solution necessary to remove contaminating salts and unincorporated dye terminators from DNA sequencing reactions.

Supplier: MILLIPORE

Plasmid Miniprep 96 kit is a quick and easy-to-use kit that produces clean and reproducible DNA in half a time than traditional methods.

Supplier: Abnova

The BSA I restriction endonuclease is a restriction endonuclease BsaI that can recognize specific sites expressed by Escherichia coli recombinantly. Restriction endonucleases are widely used in various fields such as gene positioning and cloning. This enzyme cleaves DNA rapidly for efficient gene linearization.

Supplier: MILLIPORE

BacterialXpress™ Nucleic acid extraction kit is intended for the purification of bacterial DNA from plasma, serum, cerebral spinal fluid, amniotic fluid, tissue, bone marrow, and cell culture.

Supplier: Cytiva

Pre-dispensed, freeze-dried beads that include the reagents necessary for one-step reverse transcription-PCR with high sensitivity and reproducibility.

Supplier: Cytiva

Designed to generate full length first-strand cDNA from mRNA templates. Following first-strand cDNA synthesis, the sample can be used directly for in vitro amplification using PCR or for second-strand synthesis using the Gubler-Hoffman method.

Supplier: MILLIPORE

The device utilises gel compression to extract DNA from the agarose. Centrifugal force collapses the gel structure, drives the agarose through a small orifice in the gel nebulizer and the resultant gel slurry is sprayed into the sample filter cup.

Supplier: MILLIPORE

CHEMICON's EX-WAX™ DNA Extraction Kit is intended to extract DNA from paraffin-embedded tissue fixed in 10% Formalin or non-crosslinking fixatives. DNA extracted by this kit is suitable for amplification by PCR.

Supplier: MP Biomedicals

The Taq CORE kits are designed for the amplification of specific regions of DNA using PCR. The PCR CORE Kits - Direct Loading provide Taq DNA Polymerase, PCR Direct Loading buffers and dNTPs necessary for amplification and subsequent loading of samples on an agarose gel.

Supplier: Cytiva

PuReTaq RTG PCR beads and reagents ensures reliable and robust performance in both end point and RT-PCR amplifications and ensures the lowest possible levels of contaminating prokaryotic and eukaryotic nucleic acids.

Supplier: Biotium

EvaGreen® Plus Dye has an improved signal-to-noise compared to original EvaGreen® dye, for higher sensitivity in DNA amplification applications.

Supplier: Merck Millipore (Novagen)

The NovaTaq PCR Master Mix is a ready to use 2X concentrated mixture of NovaTaq DNA polymerase, ultra-pure deoxynucleotides, and reaction buffer without magnesium chloride. The master mix simplifies the assembly of PCR reactions and offers advantages of times savings, consistency, and minimal risk of contamination. Simply add the NovaTaq PCR master mix to an equal volume containing the required amount of magnesium chloride, DNA template, and primers, and the reaction is ready for thermal cycling. The final diluted reaction contains 2,5 units of NovaTaq DNA polymerase per 100 µl. Sufficient components are included for 200 standard 50 µl (or 100×100 µl) amplification reactions.

Supplier: Merck Millipore (Novagen)

KOD Xtreme™ Hot Start DNA Polymerase is an ultra high fidelity DNA polymerase designed for the most challenging PCR applications, including crude sample PCR, amplification of long strand and highly GC-rich DNA templates.

Supplier: MP Biomedicals

Taq-&GO™ is a ready to use optimised reaction mix for PCR.

Supplier: G-Biosciences

Taq DNA Polymerase is a highly thermostable recombinant DNA polymerase derived from the thermophile Thermus aquaticus. The molecular weight of the recombinant protein is 94 kD. The Taq Polymerase is able to amplify DNA up to 5 kb with an elongation velocity of 0,9 to 1,2 kb/min at 70 to 75 °C. The error rate of this Taq Polymerase is ~2,2×10⁻⁵ nucleotide⁻¹ cycle⁻¹. Taq DNA polymerase catalyses the 5’→3’ synthesis of DNA. The enzyme has no detectable 3’→5’ proofreading exonuclease activity, and possesses low 5’→3’ exonuclease activity, which results in a 3’-dA overhang on the PCR product