Order Entry
Poland
ContactUsLinkComponent
 

You searched for: Water Purification Systems

Water Purification Systems

Water purification systems are useful for delivering water of consistently high quality for use in most laboratory and general manufacturing applications, and most systems function to remove mineral ions such as sodium, calcium, iron, copper, chloride, and sulfate, as well as ridding water samples of inorganic solids, organics, bacteria, and pyrogens. Water purification systems are ergonomically designed, provide built-in meters or clear viewing sides for convenient monitoring of water quality.

Ultrapure water remote dispenser for trace element analysis, Q-POD®

Supplier: Merck

Adapted to the Milli-Q® Advantage and Milli-Q® Integral systems, Q-POD Element produces ultrapure water with extremely low levels of elemental contamination—no need to buy a specific system to move from sub-ppb to ppt/sub-ppt detection levels. Unit employs ultra-clean materials and optimized water purification techniques to produce type I water.

Expand 1 Items
Loading...
Water treatment units, Aqua purificator PG 8595

Water treatment units, Aqua purificator PG 8595

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Expand 2 Items
Loading...
Water softener, Aqua-Soft-System, PG 8597

Water softener, Aqua-Soft-System, PG 8597

Supplier: MIELE

The Aqua-Soft system provides a continual supply of soft water and is suitable for water with a hardness up to 71° dH. It operates as a level controlled two-tank system, consisting of two cartridges with ion exchange resins and a salt reservoir. The resins are enriched with sodium ions. The hard water flows over the resins in the first cartridge, where calcium and magnesium ions are exchanged for sodium ions. At this time, no water is flowing through the second cartridge. When one cartridge is exhausted, the water is routed to the second cartridge by means of a hardness level selector corresponding to the hardness of the local water, which is inserted by customer service when the device is used for the first time. At the same time, the regeneration of the resins from the exhausted container is activated. For this treatment, brine (NaCl) is drawn from the salt reservoir. The reservoir must be replenished regularly with coarse salt pellets. Fill quantity approx. 25 kg.

Expand 1 Items
Loading...
Water treatment system, Pure Aqua Service

Water treatment system, Pure Aqua Service

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Expand 1 Items
Loading...
VWR®, Ultrapure Water System, U Series

VWR®, Ultrapure Water System, U Series

Supplier: VWR Collection

This 'two in one' lab water system produces ultrapure (Type I) and RO (Type III) water from tap water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Expand 12 Items
Loading...
VWR®, Ultrapure Water System, A Series

VWR®, Ultrapure Water System, A Series

Supplier: VWR Collection

This compact 'plug and play' lab water system is an ideal choice for users who need up to 20 litres of ultrapure Type I water or RO water (Type III) per day. Quality of the ultrapure product water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards.

Expand 4 Items
Loading...
Pure water systems, Milli-Q® IX 7003/05/10/15

Pure water systems, Milli-Q® IX 7003/05/10/15

Supplier: Merck

Reliable water purification for results reproducibility and lab productivity.

Expand 8 Items
Loading...

Ultrapure water system, Direct-Q® 5, Millipore®

Supplier: Merck

For the production of Type I water.

Expand 1 Items
Loading...
Ultrapure water systems, arium® pro

Ultrapure water systems, arium® pro

Supplier: Sartorius

Arium® pro Type I water purification systems are designed for sophisticated users to meet all their requirements for reagent grade water, needed both for critical applications and routine analyses. Different versions are available for reliable and optimal analytical results.

Expand 12 Items
Loading...
Resin Column Water Purifiers

Resin Column Water Purifiers

Supplier: SMEG

The water purifier can be used to produce deionised water at 0,8 to 1 μS/cm, suitable for the final rinsing of instrument washers. The system uses mixed bed resins (disposable) which can also retain silica. When the resins run out, they can simply be replaced with the MI700WP kit.

Expand 1 Items
Loading...

Purification and pretreatment packs for water purification systems, PURELAB® Chorus 2 RO/DI

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, Pretreatment pack for PURELAB® Chorus 2 and PURELAB® Chorus 3 water purification systems

Expand 2 Items
Loading...
PURELAB® Chorus 1 Purification Packs for Ultrapure Water Systems

PURELAB® Chorus 1 Purification Packs for Ultrapure Water Systems

Supplier: ELGA LabWater

By choosing an ELGA water purification system, you are making an investment in quality, reliability and value.

Expand 5 Items
Loading...

Purification packs for water purification systems, PURELAB® Plus

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, PURELAB purification quadpack, with 0,2 µm final filter

Expand 1 Items
Loading...
Ultrapure water systems, arium® mini / arium® mini essential / arium® mini plus

Ultrapure water systems, arium® mini / arium® mini essential / arium® mini plus

Supplier: Sartorius

Arium® mini is exclusively made of high grade materials. With its intuitive guidance, closed bag system and the practical arium® aqua stop, the unit is ideal for a daily consumption of up to 10 L of ultrapure water.

Expand 6 Items
Loading...

Water Disinfector, WD4060R

Supplier: SMEG

WD4060 is a washer disinfector designed to work with two to four washing levels (up to 8 cskdin basket). The washing chamber measures 530×510×620 mm (150 litres) and has the capability of washing, chemical disinfection, thermal disinfection (up to 95 °C) and active drying with hepa filter.

Expand 1 Items
Loading...
Ultrapure water systems, arium® comfort II

Ultrapure water systems, arium® comfort II

Supplier: Sartorius

The arium® comfort II system supplies ASTM Type I and Type II ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® comfort II is a cost effective alternative for the discerning user that is also very easy to use.

Expand 12 Items
Loading...
Reverse osmosis systems, arium® advance RO

Reverse osmosis systems, arium® advance RO

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Expand 6 Items
Loading...

Water Disinfector, WD6010

Supplier: SMEG

WD6010 is a single or double glass drop down door washer-disinfector. washing capacity of up to 12 din baskets with 65 cm width. the drop down door allows the operator to ergonomically load and unload the baskets included in the trolley without having to lift heavy weights. also available in a version with turbo cycles (WD6010T model).

Expand 1 Items
Loading...
Ultrapure water systems, arium® basic

Ultrapure water systems, arium® basic

Supplier: Sartorius

The arium® basic system supplies ASTM Type I ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® basic is a cost effective alternative for the discerning user that is also very easy to use.

Expand 2 Items
Loading...
Arium® Mini Xtend Ultrapure Water Systems

Arium® Mini Xtend Ultrapure Water Systems

Supplier: Sartorius

Compact Arium® Mini laboratory water systems have been designed for Type 1 ultrapure water requirements of 10 L per day and are ideal for use in preparation of buffers, media and samples, both in life sciences applications and in analytical laboratory procedures.

Expand 4 Items
Loading...
Ultrapure water systems, arium® comfort I

Ultrapure water systems, arium® comfort I

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Expand 12 Items
Loading...
Water purification systems, MEDICA® 7/15

Water purification systems, MEDICA® 7/15

Supplier: ELGA LabWater

Medica® 7/15 water systems are high performance water purification systems that directly feed clinical diagnostic analysers.

Expand 8 Items
Loading...

Water purification system, Ultra Clear™ RO DI

Supplier: EVOQUA WATER TECHNOLOGIES

The Ultra Clear™ RO DI series system delivers permeate water with a salt reduction of approximately 98%.

Expand 1 Items
Loading...
Water purification systems, PURELAB® Flex 3 and 4

Water purification systems, PURELAB® Flex 3 and 4

Supplier: ELGA LabWater

The PURELAB® flex is uniquely designed around the user neeeds. It combines ease of use with the accurate delivery of pure water. The intuitive to use, but sophisticated hand dispenser allows the user to precisely dispense any chosen specific volume of water, at the exact quality needed. Intelligent real time TOC monitoring. Unique choice of water dispense options. Bench/wall installation. Produce type I water from pre-purified or tap water.

Expand 1 Items
Loading...

Starter kits for water purification systems

Supplier: ELGA LabWater

Pure and Ultra Pure Water System, Starter kit 2 PURELAB 3000/7000 and CENTRA R 60/120 includes installation kit, Protek L2 pre treatment cartridge, Labpure purification cartridge

Expand 6 Items
Loading...
Chorus 1 complete water purification system, PURELAB®

Chorus 1 complete water purification system, PURELAB®

Supplier: ELGA LabWater

PURELAB chorus one complete provides a complete solution from tap to ultrapure water (type one) direct from a potable water supply, and is ideal for laboratories needing up to 100 liters of 18,2 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from a choice of additional halo dispensers.

Expand 2 Items
Loading...
Water purification and distribution systems, CENTRA® R 60, 120 and 200

Water purification and distribution systems, CENTRA® R 60, 120 and 200

Supplier: ELGA LabWater

The CENTRA-R 60, 120 and 200 offer complete water purification, storage, control and distribution systems delivering water which has been purified using reverse osmosis, UV photo-oxidization, optional deionization and 0,2 μm filtration.

Expand 1 Items
Loading...
Cole-Parmer® Stuart WS-200 Water Stills

Cole-Parmer® Stuart WS-200 Water Stills

Supplier: Cole Parmer

Get high purity water with all-glass construction.

Expand 2 Items
Loading...
Water purification systems for healthcare applications, BIOPURE 7/15

Water purification systems for healthcare applications, BIOPURE 7/15

Supplier: ELGA LabWater

These systems are designed to deliver compliant purified water at the point of use for a wide range of washer disinfectors and autoclaves to minimise contamination risk to patients.

Expand 5 Items
Loading...
Ion chromatography and water purification system, PURELAB® Flex 5

Ion chromatography and water purification system, PURELAB® Flex 5

Supplier: ELGA LabWater

This all-in-one system is designed to couple directly with the Metrohm 941 Eluent Production Module. It has an integrated recirculation chamber that ensures a supply of ultrapure water (Type I) to Metrohm ion chromatographs that is guaranteed to be fresh.

Expand 1 Items
Loading...
Recommended for You