Water Purification Systems

Supplier: Merck

ATL EQ 7000 UV cable, Milli-Q®

Supplier: Merck

The Milli-Q® SQ 240C water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a flexible handset dispenser to deliver ultrapure water. It can also be equipped with a gravity valve (optional) to dispense pure RO water directly from the SQ Switch 3,5 L tank base.

Supplier: Merck

Economical water system, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 l/min. For clinical analysers with pure water needs up to 480 L daily

Supplier: Merck

To deliver reliable, high quality scientific results, you require consistently high quality ultrapure water. The Milli-Q® EQ 7000 ultrapure water system is designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ·cm @ 25 °C; total organic carbon (TOC) ≤5 ppb] that can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab. An ultrapure water system designed by scientists, for scientists.

Supplier: Merck

This Reverse Osmosis membrane removes 95 to 99% of contaminants including ions, particulates, bacteria, and organic molecules (MW >200kDa)

Supplier: Merck

Adapted to the Milli-Q® Advantage and Milli-Q® Integral systems, Q-POD Element produces ultrapure water with extremely low levels of elemental contamination—no need to buy a specific system to move from sub-ppb to ppt/sub-ppt detection levels. Unit employs ultra-clean materials and optimized water purification techniques to produce type I water.

Supplier: Merck

Milli-Q® CLX 7000 analyser feed systems produce up to 3000 L/day of pure water from tap.

Supplier: Merck

Super-Q® Plus System is a high-flow water system designed to provide the 'final polish' to water which has been pretreated by reverse osmosis, distillation or deionization. The systems consistently produce ultrapure water quality which exceeds Type 1 ASTM/CAP/CLSI specifications.

Supplier: Merck

An integrated ultrapure and pure water system that is intelligent, easy to use and environmentally friendly.

Supplier: Merck

The Milli-Q® SQ 200 water purification system delivers ultrapure (Type 1) water from an SQ Switch 3,5 L tank filled with pure reverse osmosis (RO) water.

Supplier: Merck

Reliable water purification for results reproducibility and lab productivity.

Supplier: Merck

Milli-Q® EQ 7008/7016 ultrapure and reverse osmosis (RO, Type 3) water systems are designed to produce consistent ultrapure water quality [resistivity 18,2 MΩ.cm at 25 °C; total organic carbon (TOC) ≤5 ppb] direct from a tap water source. Final ultrapure water quality can be adapted to each user’s specific application requirements. Plus, a range of intelligent design features make it effortless to dispense water as needed and where needed in the lab.

Supplier: Merck

Economical water system with Elix® technology, producing CLRW (Clinical Laboratory Reagent Water) quality with a dispensing flow rate to analyser up to 2 L/min. For clinical analysers with pure water needs up to 300 L daily.

Supplier: Merck

The Milli-Q® SQ 240CV water purification system delivers both pure reverse osmosis (RO) water and ultrapure (Type 1) water. It benefits from a fixed preset volume dispenser that records and repeats the dispensing volume of ultrapure water.

Supplier: Merck

The Milli-Q® SQ 200P water purification system delivers ultrapure (Type 1) water from a lab's pressurized purified (RO/DI) water loop. It benefits from a flexible handset dispenser to deliver ultrapure water.

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.