You searched for: Sterilisers

Supplier: CERTOCLAV

CertoClav MultiControl 2 and MultiControl 2 Touch are the next generation of the proven MultiControl autoclave controllers. Applications: Compact instruments also simply packaged, liquids (culture mediums), bottles and equipment, refuse sterilisation.

Supplier: CERTOCLAV

These compact stand-alone laboratory autoclaves CertoClav-Vacuum-Professional offer 11 pre-defined programs for sterilisation of solid materials, hollow body, porous materials, textiles, liquids prions and plastics. They are used in microbiology, bio-chemistry, food industry, material testing, pharmacy and universities.

Supplier: CERTOCLAV

The compact CertoClav can be used in even the smallest laboratory. Everything that is constantly needed can therefore be sterilised at the workplace, cultures, glass containers, metal, rubber, textile and steam resistant synthetic materials.

Supplier: CERTOCLAV

The STE-45-T autoclave makes everyday laboratory work much easier thanks to its predefined standard programmes, automatic documentation and short sterilisation cycles. Its preheatable chamber, the air cooling system and the vacuum pump enable a fast sterilisation cycle including drying.

Supplier: NICKEL ELECTRO

This steriliser is a laboratory steriliser, using steam to sterilise small unwrapped instruments and non-porous equipment which displaces air passively from the chamber and its load by steam generated within the steriliser.

Supplier: SANOCLAV WOLF

Lid and chamber made of stainless steel, suitable for the sterilisation in tightened steam and water.

Supplier: SANOCLAV WOLF

Lid and chamber made of stainless steel, suitable for the sterilisation in tightened steam and water.

Supplier: SANOCLAV WOLF

Autoclaves for sterilisation in tensioned steam and water.

Supplier: SANOCLAV WOLF

Chamber made of rustproof stainless steel material, suitable for the sterilisation in tightened steam and water.

Supplier: HMC Europe GmbH

The four HV models are simple and robost which consists of a quicklock, dual sensor system, themolock and a exhaust air filter and are used for higher standards.

Supplier: SANOCLAV WOLF

Small sterilisers for sterilization in tightened steam and water.

Supplier: schuett-biotec GmbH

The Schuett Solaris is the perfect solution to avoid using naked flames or if gas cartridges are not available. The unit uses standard electrical power and reaches the safe working temperature of 900 to 1300 °C within seconds. No warm-up time, no excess heat, no energy consumption between work cycles. Start is generated by an infra-red sensor, which allows efficient one-handed operation. The integrated timer can be set to 5 or 7 s. Pathogenic material is kept inside the sterilisation chamber. No spreading, no sooting. Ideal for use in Laminar Flow Cabinets. Working angle can be adjusted. Robust and sturdy, no parts subject to mechanical wear, ideal for mobile operation in the field.

Supplier: HMC Europe GmbH

Compact HG series consists of vertical steam sterilizers with automatic locking lid is coupled with a pressure and temperature monitoring system. The V-seal gasket is activated by pressure. It is embedded in the edge of the lid, and swivelled up and out of the way upon opening to protect it against damage during loading and unloading.