Supplier: MILLIPORE

This peristaltic pump has polysulfone and steel pump head, stainless steel chassis and painted steel case.

Supplier: Merck

The Milliflex Oasis® vacuum pump made of acrylonitrile styrene acrylate and polycarbonate.

Supplier: Avantor Fluid Handling

Mix, react, and/or separate liquid-liquid mixtures in a single device.

Supplier: ENTEGRIS

Galtek® aspirator is ideal for the extraction and/or dilution of fluids from chemical tanks.

Supplier: Avantor Fluid Handling

Proven design utilizes centrifugal action to remove and concentrate solids.

Supplier: Integra

The DOSE IT peristaltic pump makes dispensing of culture media, buffers and other solutions easy and efficient. In addition to the dispensing and pump mode, DOSE IT is able to create customised liquid handling protocols. Easy to follow instructions on the display allow users to set up individual protocols, consisting of consecutive application steps.

Supplier: MILLIPORE

Chemical Duty Pump Maintenance Kit

Supplier: MILLIPORE

Chemical Duty Pump Rebuild Kit

Supplier: MILLIPORE

The Chemical Duty Pump has a chemically-resistant head and diaphragm for use with corrosive chemicals and solvents.

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: VACUUBRAND

The VACUU·SELECT complete controller is ready for use with existing vacuum sources like pumps or vacuum networks.

Supplier: MILLIPORE

This laboratory filtration pump is ideal to transfer filtered liquids directly to waste.

Supplier: MILLIPORE

Simply connect the pump to your manifold or filtration apparatus and place the discard tubing to drain and you are ready to filter. There is no need to use additional containers to capture the waste liquid. This brings a significant time saving versus traditional vacuum/pressure pumps or in-house vacuum because the following steps are eliminated: disconnecting the waste containers, emptying liquid waste, cleaning/decontaminating, re-installing the waste containers.

Supplier: MILLIPORE

Millivac™ Maxi vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.

Supplier: MILLIPORE

Millivac™ Mini vacuum pumps are compact, maintenance-free pumps that provide a consistent source of vacuum for filtration and other laborabory applications. A patented diaphragm design has reduced the footprint of the pumps compared to conventional models.

Supplier: VWR Collection

The VWR® vacuum aspiration system is designed for laboratory waste recovery and the separation of liquids and solids.

Supplier: witeg Labortechnik

Water jet pumps made of brass and nickel-plated.

Supplier: Heidolph Instruments GmbH & Co.KG

Models SP quick 1,6 and 2,5 mm.

Supplier: VACUUBRAND

The CVC 3000 detect compact vacuum controller complete with integral vacuum valve and sensor is ready to use either as a bench top or stand mounted unit. The CVC 3000 detect is a compact two-point vacuum regulator, with integrated ceramic vacuum sensor and ventilation valve. The "detect" function provides the ability to recognise and find the boiling pressure and thus greatly facilitates the work of solvent evaporation. With integrated non-return valve and chemistry vacuum valve, it forms a highly compact and easy-to-install unit for vacuum regulation. Used in conjunction with existing vacuum pumps or networks, process efficiency is significantly increased through the "detect" electronic vacuum control, the solvent recovery is increased and the environment better protected. The programmable CVC 3000 detect is available for both bench top and stand mounting operation.

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: GILSON

The VERITY® syringe pumps provide speed and reliability to small- and large-volume, repetitive liquid transfers in HPLC, SPE, and other general liquid handling methods.

Supplier: KNF

Vacuum control unit to control the vacuum applications, like rotary evaporation, distillation, multi-user vacuum system.

Supplier: VACUUBRAND

Model CVC 3000: Fully electronic, highly versatile vacuum gauge and controller. The controller is equipped with a built-in capacitive absolute-pressure transducer made from alumina/ceramic as well as a built-in venting valve and switched outlets for a suction line valve and a coolant water valve. It eases work considerably and enables environmentally friendly operation whilst protecting samples, solvent recovery, reduced foam formation and superheating. The optimum vacuum setting can be found quickly and simply, even with unknown mixtures and pressures.

Supplier: HARVARD APPARATUS

Peristaltic Pump P-70 offers unparalleled accuracy, reproducibility, and ease of use. P-70 drive provides flow rates from 0,001 to 70 ml/min.

Supplier: VACUUBRAND

The VACUU·SELECT controller is an intuitive, easy-to-use vacuum controller with a touch screen display suitable for all laboratory vacuum processes. For solvent evaporation, VACUU·SELECT detects boiling points and adjusts the vacuum process as necessary.

Supplier: VACUUBRAND

The DCP 3000 is an outstanding vacuum gauge with large illuminated display. The brand new VSP 3000 vacuum sensor is based on thermal conductivity (Pirani) and offers a wide measurement range from atmospheric pressure down to 10 to 3 mbar. The wetted parts are made of chemically resistant plastics (PBT, PUR) and alumina ceramics. It features a much better chemical resistance and ruggedness than conventional Pirani sensors with their fragile metallic spiral-wound filament. Simultaneous connection of up to eight vacuum sensors allows flexible measuring on the spot. The DCP 3000 communicates with external components via the VACUU·BUS® digital bus system. It is characterised by fully automatic configuration, unified plug connections and cable lengths of up to 30 m. In addition the DCP 3000 offers relative pressure measurements (VSK 3000 as reference) and a data logger feature for up to 32000 data values.

Supplier: VACUUBRAND

VACUU·SELECT fine vacuum control packages provide an easy-to-use vacuum control option for work between 1 mbar and 10^-3 mbar, such as freeze drying, Schlenk lines, and molecular distillation. Predefined applications can be adjusted easily, and new applications can be created in a matter of seconds, to meet your precise needs.

Supplier: VACUUBRAND

VACUU·VIEW vacuum gauge are chemically resistant ceramic diaphragm sensor for measurement in the rough vacuum range and it provides gas-independent pressure indication with precise capacitive readout.

Supplier: Welch by Gardner Denver

Precise vacuum control for evaporation and distillation of solvents and chemicals.

Supplier: VACUUBRAND

Versatile, accurate and robust vacuum gauge. Outstanding measurement accuracy thanks to its capacitive, anti-corrosive gauge head with excellent long-term stability and effective temperature compensation. With its robust plastic housing and splash-proof gauge head, the VSK 3000 is ideal for tough applications.