You searched for: Level Sensors

Supplier: S.C.A.T.

These level sensors provide dependable protection from overflow when filling barrels. The float positions itself securely at the opening by its own weight while the barrel fills up. Available in different materials, therefore suitable for all chemicals.

Supplier: Bohlender

The b.safe Mini-display is the optimal basic solution for the local control of single HPLC units.

Supplier: Avantor Fluid Handling

No clog or wear—contain no moving parts.

Supplier: Bohlender

The b.safe Mini-Display is the optimal basic solution for the local control of single HPLC units.

Supplier: Avantor Fluid Handling

Easily mounts to any sensor or fitting assembly.

Supplier: Bohlender

Optional device for fill level or empty level control in containers and canisters made of non-conductive materials.

Supplier: Avantor Fluid Handling

Never come up empty—reads to ±0.50 gallon (1 liter).

Supplier: Avantor

These level indicators provide the digital readout of the approximate volume of solvent remaining in the CYCLE-TAINER system.

Supplier: S.C.A.T.

Monitor two filling levels at once, perfect integration into lab furniture with the Built-In Signalbox ant the Signalbox T1 and T4.

Supplier: Avantor Fluid Handling

Selectable normally open or normally closed relays increase system flexibility.

Supplier: Avantor Fluid Handling

Control large loads—SPDT relay(s) rated 250 VAC, 10 A resistive.

Supplier: asecos

This level indicator is suitable for all standard 200 l barrels and non-corrosive liquids.

Supplier: Avantor Fluid Handling

Control liquid level even in corrosive environments.

Supplier: S.C.A.T.

Automatically divert waste liquids into the reserve canister.

Supplier: Avantor Fluid Handling

Easy configuration via push button display module.

Supplier: Avantor Fluid Handling

Compatible with Smart Trak and Switch-Pak installation fittings.

Supplier: Avantor Fluid Handling

Don’t worry about buildup—automatically adjusts for optimal performance, alerts when cleaning is required.

Supplier: Bohlender

Enclosed housing for installation at the rear side of a safety cabinet. Unit provides safe signal exchange between explosion-hazardous and explosion-proof areas by galvanic isolation of the sensor side and the output side.

Supplier: S.C.A.T.

Measuring filling levels continuously. Monitoring non-transparent canisters on a permanent basis is no problem with the continuous level control unit.

Supplier: Avantor Fluid Handling

An integrated control automation solution that provides noncontact level measurement with switch and control capabilities.

Supplier: Avantor Fluid Handling

Get longer life and more durability with hermetically sealed switches.

Supplier: Avantor Fluid Handling

Eliminate nuisance switch tripping with a wide range of differentials.

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Avantor Fluid Handling

Measure level without touching fluid to avoid contamination.

Supplier: Bohlender

Display unit to control the b.safe Splitter, which is available as an option in combination with connected fill-level sensors in b.safe Waste Caps and b.safe System Waste Caps.

Supplier: Bohlender

3-Way stopcock with stainless steel housing and integrated control module.

Supplier: Avantor Fluid Handling

Accurate and rugged level monitoring at higher temperatures.

Supplier: Avantor Fluid Handling

Install from the top of your tank—attach your own conduit to protect wiring.

Supplier: S.C.A.T.

Monitor two filling levels at once. Perfect integration into lab furniture with the Built-In signalbox and switch amplifier.

Supplier: S.C.A.T.

Necessary and helpful accessories for use with SCAT electronic level controls.