You searched for: Tubes
Fulfill a wide and varied range of tests and procedures with the tubes available in our extensive catalog. Tubes are made of glass or hard plastics to accommodate extreme temperatures in either direction, as well as providing superior chemical inertness and durable longevity. Disposable and reusable models exist for certain functions, with all tubes capable of holding up to the sometimes strenuous conditions placed upon them in laboratory procedures.
Bond Elut Diol (2OH) tubes
Supplier: VARIAN
Bond Elut diol (2OH) resembles unbonded silica in its tendency for strong hydrogen bonding with analytes, but can also be employed in the non-polar mode.
Expand 1 Items
Drying tubes, bend
Supplier: witeg Labortechnik
Borosilicate glass 3.3. Angled at 75° with ground joint cone.
Expand 2 Items
Well plate tubes for Bond Elut C18 EWP plates
Supplier: VARIAN
VersaPlate well plate tubes, C18 EWP, 300 mg
Expand 1 Items
Round bottom high clarity polypropylene tube, disposable, Falcon®
Supplier: Corning
These disposable, clear polypropylene tubes are best suited for procedures requiring high optical clarity, and thermal and chemical stability. Provide reliable containment of laboratory fluid samples.
Expand 6 Items
Transport tubes, with stopper
Supplier: SEMADENI
PS, clear, with white push-in stopper.
Expand 3 Items
Accessories for MColortest™
Supplier: Merck
Testing vessel for MColortest™, flat bottom tubes, Flat bottom tubes for MCC, MCC
Expand 6 Items
Centrifuge Tubes with Conical Bottom
Supplier: witeg Labortechnik
Centrifuge Tubes with Conical Bottom
Expand 2 Items
PPL Tubes, Bond Elut™
Supplier: VARIAN
Bond Elut PPL (Priority PolLutant) is a modified styrene-divinylbenzene polymer that retains polar analytes, including phenols, for excellent absolute recoveries.
Expand 1 Items
Disposable culture tubes, rimless, dispenser pack and bulk pack, PYREX®
Supplier: Corning
Made of borosilicate glass to reduce pH changes and contaminants potentially leached from soda-lime glass.
Expand 8 Items
Shipping Tube, with Screw Cap
Supplier: SEMADENI
Transparent, with tightly closing snap-on lid made from polyethylene.
Expand 1 Items
Mini dialysis kit
Supplier: Cytiva
The disposable tubes in mini dialysis kit offer a simple solution to the handling problems of small volume dialysis. The dialysis tubes in the kit each have a cap that incorporates a small disk of dialysis membrane.
Expand 4 Items
Test tubes, PS, with screw caps
Supplier: witeg Labortechnik
PS, clear, with screw cap.
Expand 1 Items
Test tubes without rim, heavy wall
Supplier: witeg Labortechnik
AR-Glass, clear.
Expand 1 Items
PCR tubes, 0,2 ml, with cap
Supplier: DELTALAB
Tubes made of PP with attached hinged caps.
Expand 2 Items
Centrifuge tubes, round bottom
Supplier: witeg Labortechnik
DURAN®, borosilicate glass.
Expand 6 Items
Microtube refill system for micro-racks, ratiolab®
Supplier: RATIOLAB
Plastic rack with cardboard box.
Expand 4 Items
Nessler cylinders, soda lime glass
Supplier: MARIENFELD
Nessler cylinders are made of soda lime glass with white circular mark and spout. They are used for comparison of colour and turbidity between solutions.
Expand 3 Items
Containers for plant tissue culture
Supplier: Greiner Bio-One
Container, PS, clear for plant tissue culture. These containers are specially suited for plant tissue culture. The use of a very clear material ensures maximum light transmission and thus rapid and successful growth. These culture containers are not only suitable for the proliferation of plant tissue cultures but can also be used as transport containers.
Expand 1 Items
Containers for plant tissue culture, PLANTCON™, MP Biomedicals
Supplier: MP Biomedicals
PlantCon™ container is a presterilised, disposable, plastic growth containers. It consists of a cover and a bottom, and features a vent for gas exchange, and a drip control lip to recycle condensation.
Expand 2 Items
Colour viewing tubes
Supplier: Hach
Color viewing tube, with 5 & 20 ml mark, for Test Kit DE2.
Expand 1 Items
Dolphin microcentrifuge tubes, Sorenson™
Supplier: Merck
Dolphin microcentrifuge tubes are an ideal design for pelletising samples. They have a positive seal design which allows for repeated cap closures, and will not pop open under pressure when boiling.
Expand 1 Items
Strips of 8 PCR tubes without cap
Supplier: Greiner Bio-One
PP, translucent, coloured.
Expand 13 Items
Specimen tubes
Supplier: MURRAY S
Soda-lime glass. Straight sided tubes, with beaded rim and push in PE closure.
Expand 14 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Industrial Physics
Supplier: AAT Bioquest
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: Integra
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One