You searched for: Seals

Supplier: Greiner Bio-One

Made from ethyl vinyl acetate (EVA) or silicone, CapMats offer an alternative method for sealing 96 and 384 well microplates. All CapMats are free of RNase, DNase, and human DNA, are non-pyrogenic, and are suitable for PCR applications.

Supplier: EPPENDORF

Secure your samples with Eppendorf® Microplate self-adhesive film and foil, perfect for incubation and short-term storage. Films protect from punctures while aluminium foils shield light-sensitive samples with easy sealing.

Supplier: DWK Life Sciences

Rubber, black.

Supplier: Cytiva

O-Ring, 13,1×1,6 mm, Fluor carbon rubber (FPM)

Supplier: DWK Life Sciences

EPDM or Vitron.

Supplier: Cytiva

Can be used in aqueous solutions and nearly all organic solvents commonly used in liquid chromatography of macromolecules with the following few exceptions - chlorinated hydrocarbons, acetone and other ketones, aliphatic esters and phenol

Supplier: Cytiva

O-ring, 5,3×2,4 mm

Supplier: VICI

Mechanical Seals, Rotor seal 8-port 3-position C75 valve

Supplier: Cytiva

Elastomer, Solvent resistant O-ring, 11,3×2,4 mm, perfluoro elastomer

Supplier: DWK Life Sciences

O-Ring, silicone (VMQ), DN 200, 236×5,3 mm, For: DN 200 desiccators

Supplier: HWS LABORTECHNIK

Mechanical Seals, Exchange seal, for PTFE spindle

Supplier: HWS LABORTECHNIK

Mechanical Seals, Sealing kit includes dynamic seal with two lip seals (PTFE) and O-ring (PTFE)

Supplier: QVF LABORTECHNIK

Mechanical Seals, Overhead stirrer, Stirrer seals, KPG, sealed, NS 29/32, for 10 mm shaft

Supplier: Cytiva

O-Ring, Fluorinated Propylene Monomer (FPM/FKM), 22,1×1,6 mm

Supplier: Aesculap

Seal to secure the container lock against uncontrolled opening.

Supplier: Agilent

These inlet seals have been developed to ensure that you have a consistent and inert surface to properly seal the inlet and prevent sample degradation.

Supplier: HWS LABORTECHNIK

The new dynamic seal can be used under moderate pressure and vacuum according to security rules.

Supplier: Agilent

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Sealing mat for 2 ml 96-well plate, EVA

Supplier: KLEINFELD

Soft rubber sealing rings, makes grease unnecessary. Suitable for desiccators and Witt jars.

Supplier: Agilent

Microplate seal, Single sheet/mat/strip, Captiva 96-well collection plate seals

Supplier: DIVERSIFIED BIOTECH

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, HotSeal, pre-cut self-adhesive sheets, Sealing film for PCR, HotSeal, Polyester, Sterile

Supplier: Thermo Fisher Scientific

Thermo Scientific™ Rheodyne™ replacement rotor seals for injectors made of ETFE to maintain the performance of Rheodyne™ sample injectors for high-performance liquid chromatography (HPLC).

Supplier: RATIOLAB

Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Cover film, Aluminum universal cover film, Aluminium, Non sterile

Supplier: Greiner Bio-One

VIEWseal™ is an adhesive sealing film coated with a silicone adhesive, which only sticks when the film surface is pressed on. The film is easy to work with, even when wearing gloves (the film does not adhere to gloves).

Supplier: Greiner Bio-One

AMPLIseal™ is a self-adhesive sealing film notable for its low autofluorescence, in particular in the wavelength range critical for Real Time PCR. It consists of a thick PP film coated with a transparent acrylate adhesive. The adhesive layer is protected by a peelable polyester film. The strongly adhering acrylate adhesive provides reliable sealing, thereby minimising evaporation but without influencing the PCR reaction or the fluorescence measurement.

Supplier: Merck

Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.

Supplier: GLINDEMANN

PTFE, white.

Supplier: SciLabware

PTFE, white.

Supplier: SciLabware

Silicone rubber sheathed with PTFE.

Supplier: Greiner Bio-One

These adhesive seals offer an alternative to heat seals or sealing mats. EASYseal™ is a transparent adhesive film designed to cover microplates to protect samples from evaporation and contamination. It is suitable for routine laboratory use, including ELISA applications. BREATHseal™ is a gas permeable, pierceable membrane coated with an acrylic adhesive. It is ideal for bacterial, yeast and cell culture applications, assuring the protection of cell contents from contamination whilst maintaining oxygenation.