You searched for: Filtry strzykawkowe

Supplier: Avantor

These syringe filters are specifically designed for chromatography sample preparation applications and optimised to provide the most consistent results with less extractables.

Supplier: Cytiva (Formerly Pall Lab)

Acrodisc™ syringe filters with Supor™ membrane deliver high flow rates and low protein binding.

Supplier: Cytiva (Formerly Pall Lab)

Useful for a wide range of applications, including aggressive and non aggressive solvent-based mobile phase.

Supplier: Cytiva (Formerly Pall Lab)

Uniwersalny filtr zarówno dla wodnych próbek filtracyjnych, jak i na bazie rozpuszczalnika. Doskonała zgodność chemiczna z estrami, zasadami i alkoholami.

Supplier: Cytiva (Formerly Pall Lab)

ValuPrep syringe filters offer the confidence of Pall membranes in economic 1000 packs.

Supplier: Cytiva (Formerly Pall Lab)

Do roztworów zawierających dimetylosulfotlenek (DMSO) Sterylizacja pożywek używanych do kriokonserwacji komórek.

Supplier: VWR Collection

Typowe zastosowania to klarowanie, sterylna filtracja, przygotowanie próbek i sterylna wentylacja.

Supplier: Cytiva (Formerly Pall Lab)

Optimised to provide the most consistent results when analysing ionic species. Certified for low level extractables detected by conductivity.

Supplier: Cytiva (Formerly Pall Lab)

Exceptional chemical and temperature compatibility. Ideal for filtration of gas and organic solvents. Prevent spurious peaks on chromatograms allowing accurate experimental results. HPLC certified for low level of UV-absorbing extractables.

Supplier: Cytiva (Formerly Pall Lab)

The new Acrodisc® One and Acrodisc® PSF premium syringe filters combine the benefits of a multi-layered prefiltration device with an automation-certified filter housing.

Supplier: Cytiva (Formerly Pall Lab)

These XT Acrodisc® units with Mustang® Q membrane are designed for laboratory use and scale-down process development.

Supplier: Cytiva (Formerly Pall Lab)

Simplifies scale up and minimises revalidation; no need to change membrane materials during transition to pilot or production. PP housing; four membrane chemistries assure compatibility with a wide range of fluids.

Supplier: Cytiva (Formerly Pall Lab)

Maksymalizacja przepustowości dla trudnych do filtracji próbek. Dla zmniejszenia zatykania, używać pojedynczo lub szeregowo z końcowym filtrem membranowym, w celu zwiększenia szybkości przepływu i przepustowości.

Supplier: Sartorius

Minisart® RC with hydrophilic regenerated cellulose (RC) is optimised for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. With a pore size of 0,2 µm that can be used for sample preparation and sterile filtration.

Supplier: Sartorius

Membrane adsorber units with ion exchange membranes (stabilised reinforced cellulose) are ideal for capturing of large proteins and viruses as no size exclusion effects can be observed.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Whatman products (Cytiva)

Whatman ReZist range of syringe filters has been specifically designed to be resistant to organic solvents.

Supplier: Sartorius

Minisart® NY with hydrophilic polyamide (nylon) is optimised for aqueous liquids and solvents with a pH of 3 to 14. Type 17845 with a pore size of 0,2 µm can be used for sample preparation and sterile filtration. It has a male Luer slip outlet and version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Cytiva (Formerly Pall Lab)

The next generation universal membrane of the Acrodisc® One syringe filters is suitable for all sample types with fast flow rates, low protein binding, and low levels of UV-absorbing extractables.

Supplier: Cytiva (Formerly Pall Lab)

The Acrodisc® WBC premium syringe filter is ideal for use in the capture and recovery of leukocytes and the separation of red blood cells. Acrodisc® WBC provides a simple and efficient method to isolate blood cells used in a variety of research applications including: Antigen specificity and modulation studies, immune receptor analysis, receptor protein studies, genotyping, gene expression, cell therapy.

Supplier: Sartorius

Minisart® PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0,22 µm can be used for sterile filtration and has a male Luer slip outlet. Version ACK is individually packed and sterilised by ethylene oxide (EO).

Supplier: Sartorius

Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. With a pore size of 0,2 µm that can be used for sterile filtration. It has a male luer lock outlet and version HYK is individually packed and sterilised by ethylene oxide (EO). Only available in the EU/EEA and registered countries.

Supplier: Sartorius

Elimination of particles from samples prior to HPLC or other chromatographic analysis is essential in order to maintain the integrity of the chromatography column and to maximise its operating life time. Minisart® syringe filters optimised for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with an effective filtration area of 0,12, 1,7 and 4,8 cm².

Supplier: Whatman products (Cytiva)

Whatman Anotop non sterile syringe filters from Cytiva feature an inorganic Anopore membrane in a polypropylene housing.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman Anotop Plus sterile syringe filter with glass microfiber prefilter is compatible with most organic and aqueous solutions for use in a wide variety of applications.

Supplier: MICROSOLV

Colour coded low volume syringe filter for HPLC, CE or dissolution testing.

Supplier: Whatman products (Cytiva)

Cytiva's Whatman GD/X sterile syringe filter is designed to support filtration of viscous, hard-to-filter samples with high solids content.

Supplier: Whatman products (Cytiva)

Whatman Anotop sterile syringe filters from Cytiva contain an inorganic Anopore membrane. The low protein binding exhibited by this sterile membrane filter make it well suited for biological filtration.

Supplier: Whatman products (Cytiva)

Whatman Puradisc syringe filters from Cytiva's business combine premium quality with economic efficiency. They are well suited for rapid, routine syringe filtration of samples up to 100 ml.

Supplier: MILLIPORE

HPLC certified filters for the filtration of organic and aqueous solutions in HPLC.