You searched for: Homogenisers Bench

Supplier: VWR Collection

These compact homogenisers are suitable for all standard dispersing tasks and intensive mixing. The units are robust, and their stability prevents pulsation oscillations and vibrations, it is also simple and safe to change aggregates for different tasks.

Supplier: VWR Collection

The VWR® 4-place Mini Bead Mill homogeniser is compact and powerful.

Supplier: VWR Collection

VWR® Bead Mill MAX is the premier model in the VWR Bead Mill homogeniser range. VWR Bead Mill MAX is designed to grind, lyse or homogenise the most difficult samples with repeatable results. The unique tube carriage motion ensures the intra-tube bead movement reduces swirling, and creates the highest bead impact force of any bead mill on the market.

Supplier: KINEMATICA

Stand model, digital, volume range 0,1 ml to 10 litres. Powerful unit for a wide range of dispersing and homogenising applications in the laboratory using the rotor/stator principle. Remote operation can be achieved with PC control using the supplied software and selection of the AUTO–mode.

Supplier: VWR Collection

A ball mill for disintregration of small sample volumes that can also be used to shake/mix microtubes and microplates. Wide range of applications in different scientific fields from geology to biotechnology.

Supplier: VWR Collection

The VWR® Bead Mill homogeniser is a part of the newest generation of Bead Mill homogenisers. This economical system is specifically designed for grinding, lysing and homogenisation of up to 16 samples. Using sample tubes pre-filled with a variety of lysing beads, the VWR Bead Mill vigorously and uniformly shakes the tubes providing an efficient, consistent high yield and quality homogenisation usually in less than 40 seconds.

Supplier: KINEMATICA

Stand model, volume range 0,05 to 2500 ml for dispersing, homogenising, extractions, cell disruption, mixing, emulsifying and suspending. This model replaces the PT 1600 E and the PT 2100 incorporating the best aspects of both models.

Supplier: KINEMATICA

Stand model, volume range 0,1 ml to 30 litres. The powerful PT 6100D was designed to deliver exactly reproducible homognising conditions for volumes up to 30 litres with the option to select and vary speed and time of operation, whilst monitoring the temperature. The unit can be controlled via the membrane keypad or from a PC using KIN software via an RS232 interface.

Supplier: KINEMATICA

Stand model, volume range 0,1 to 10000 ml. Benchtop homogeniser with powerful motor and space-saving slimline design, which is easy to handle. Ideal for any dispersing and homogenising task. Interchangeable drive extensions mean different types of stand can be used.

Supplier: MP Biomedicals

FastPrep-96™ is a versatile high speed homogeniser offering the ultimate in high throughput sample preparation. It is used to homogenise biological samples. FastPrep®-96 lyses thoroughly and quickly any tissues and cells so allowing easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: IKA

Stand model, volume range 2 to 50 litres.

Supplier: MP Biomedicals

Metal bead lysing matrix contains 3,175 mm diameter stainless steel.

Supplier: MP Biomedicals

FastPrep®-24 is used to homogenise biological samples. It lyses thoroughly and quickly any tissues and cells and thus allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 0,8 mm zirconium silicate beads.

Supplier: IKA

The T 25 easy clean digital is a high-performance dispersing instrument with electronic speed control from 3000 - 25000 rpm for working volumes of 1 - 2000 ml (H₂O).

Supplier: MP Biomedicals

Each impact-resistant tube contains 1,6 mm aluminum oxide particles and 1,6 mm silicon carbide particles.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains one 6,35 mm, 0,25 cal stainless-steel grinding ball.

Supplier: IKA

Stand model, volume range 1 to 2000 ml. The T 25 homogeniser is ideal for applications such as homogenising wastewater samples, for the use in laboratory reactors, dispersion tasks under vacuum/pressure and sample preparation in medical diagnostics.

Supplier: IKA

The LABOR-PILOT is a compact and multi-purpose inline laboratory dispersing machine. It is designed for solid-liquid mixing, homogenising, emulsifying, suspending and wet milling. The LABOR-PILOT 2000/4 is suitable for wide range of applications, particularly in the chemical, cosmetic, pharmaceutical, plastics, colours and food industries. It is uniquely designed with advanced technology and is available with six interchangeable modules.

Supplier: IKA

The UTTD control life science solution package was specially put together to meet the critical challenges of homogenising tissue, cartilage and bone samples: homogeneous comminution of the samples and protection against cross-contamination.

Supplier: OHAUS

The HT (High Throughput) lysing bead mill laboratory homogeniser provides efficient solutions for grinding, lysing, pulverising, mixing and homogenising in sample preparation applications.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in the FastRNA™ Pro Red Kit and FastProtein Red Matrix. Lysing Matrix C is used primarily for lysis of yeast and fungi and can also be used for moulds, spores and filamentous algae.

Supplier: IKA

Powerful disperser for volumes ranging from 1 to 2000 ml (H2O) with digital speed display. The wide speed range of 600 to 25000 rpm facilitates work with high circumferential speeds. An extensive selection of dispersing shafts makes multiple applications possible. The application range includes homogenisation and dispersion tasks for use under vacuum in the IKA laboratory reactors.

Supplier: IKA

Many standardised test procedures in the pharmaceutical industry, such as the pharmacopoeia tests described in official compendia (United States Pharmacopeia (USP 905), European Pharmacopoeia (PhEur 2.9.40), etc.), require the crushing and dissolution of tablets as a first step before further analysis. The challenges in sample preparation include the avoidance of cross-contamination between sample batches, time-consuming cleaning and the often small sample quantities.

Supplier: IKA

The T 25 easy clean control is a high-performance dispersing instrument with electronic speed control from 3000 to 25000 rpm for working volumes of 1 to 2000 ml (H2O). The S 25 EC-T-C-18G-ST tool allows temperature measurement and operation time detection through RFID. Device overheating is prevented by continuous temperature monitoring and the setting of temperature limits. The detection of operating time serves to guarantee regular maintenance.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains garnet matrix and one ¼ inch ceramic sphere. Extra ¼" ceramic spheres are packaged separately. Lysing Matrix A tubes have orange caps and are found in the FastDNA™ and FastDNA™ SPIN Kits. Lysing Matrix A is used for all sample types except soil for the subsequent isolation of genomic DNA, RNA, functional proteins and other metabolites and small molecules. This grinding matrix is chemically inert and will not bind nucleic acids.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and a 4 mm black ceramic sphere.

Supplier: MP Biomedicals

FastPrep®-24 5G is a high speed bench top homogeniser offering the ultimate in speed and performance for the lysis of biological samples. It uses a unique, optimised motion to disrupt cells through the multi-directional, simultaneous beating of specialised Lysing Matrix beads on the sample material. Developed for difficult and resistant samples, the FastPrep®-24 5G instrument lyses thoroughly and quickly any tissues and cells and allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm glass beads and 2 mm yellow zirconium oxide beads.

Supplier: IKA

Universal disposable disperser system with disposable sample tubes that can be hermetically sealed. Provides protection and security from infectious sample materials, toxic substances or substances with strong odours.