You searched for: Chromatography Spare Parts

Supplier: Agilent

The key features of power amplifier tubes for PerkinElmer ICP-MS systems.

Supplier: Agilent

These alignment interfaces are an integral part of the Agilent diode-array detection system.

Supplier: Agilent

These torches are suitable for PerkinElmer ICP-MS systems.

Supplier: Agilent

A variety of high quality pump kits for LC systems and applications, containing all fittings and connections required.

Supplier: Agilent

Before ordering parts for FID maintenance, determine which type of FID is installed on your GC. The FID is available in two versions: Dedicated, capillary optimized: for capillary columns only. Adaptable: for packed or capillary columns.

Supplier: Agilent

A range of accessories and supplies for skimmer and sampling cones for use with our ICP-MS portfolio.

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

These starter kits contain the most widely used capillary tubing, Swagelok connectors, and fittings in a variety of sizes.

Supplier: Agilent

MP-AES Sample Kits provide convenient kits for handling aqueous/acidic and organic samples. Select the appropriate one for your application.

Supplier: Agilent

These performance maintenance kits for Dionex HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

These coils are equivalent to PerkinElmer ICP-OES coils for complete confidence.

Supplier: Agilent

The micro ECD has a detection zone volume 10 times smaller than any other ECD with replicable inlet liner to decreasing column contamination of the cell.

Supplier: Agilent

CrossLab piston seal, reversed-phase, For: Thermo UltiMate 3000 RS and SD pump series

Supplier: Agilent

Agilent burner chamber assemblies for PerkinElmer AA systems are designed to provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

A range of high quality supplies and components for the Integrated Sample Introduction System (ISIS) for use with the 7700 ICP-MS range.

Supplier: Agilent

A vacuum degasser is recommended for maximum sensitivity in the low UV wavelength range; high injection precision; high retention time reproducibility; and flow rates below 0,5 ml/min.

Supplier: Agilent

In 2005, Agilent released an improved FPD with minimum detectable levels (MDL) of 3,6 pg/s for sulphur and 60 fg/s for phosphorus. This is more than a five times improvement for sulphur.

Supplier: Agilent

The ISIS 3 dramatically increases the productivity of both the Agilent 7800 ICP-MS and the Agilent 7900 ICP-MS while also allowing high matrix samples to be run for extended periods of time.

Supplier: Agilent

These performance maintenance kits for Waters HPLC systems contain all the normal wear parts, tools for disassembly/reassembly, and instructions necessary to keep your systems operating at peak performance.

Supplier: Agilent

Intuvo Flow Chips are modular, microfluidic components that create connections between the inlet, column, and detector(s) without the need for ferrules, and can be easily swapped in minutes.

Supplier: Agilent

These torches for PerkinElmer ICP-OES are available in a wide range of styles from 0 to 3 slots, depending on the instrument and your application needs.

Supplier: Agilent

These torch injectors for PerkinElmer ICP-OES are available in a wide range of types. Choose from alumina or quartz in a range of sizes and acid resistance.

Supplier: Agilent

These nebulisers for PerkinElmer AA systems provide the best precision, efficient drainage, minimal burner blockage, and reduced interferences.

Supplier: Agilent

The 5100 ICP-OES features a plug and play torch, and a simple and effective torch-loader mechanism. This automatically aligns the torch and connects the gases to ensure fast start-up and reproducible performance.

Supplier: Merck

These SPME fiber assemblies can be reused for up to 100 analyses depending on the application.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.

Supplier: Restek

This column protection system has three levels of protection: filter only, cartridge only, or filter and cartridge.

Supplier: Agilent

The HSDC is comprised of a fused silica cell body and removable capillaries. The light path through the cell is made from black fused silica which significantly minimizes stray light and defines the aperture for the diode-array spectrometer.

Supplier: Agilent

The Quick-Connect torch module for PerkinElmer ICP-OES includes the torch, mounting block, 2 mm alumina injector, Scott spray chamber, and Cross-Flow nebuliser.

Supplier: Agilent

These graphite platforms and tubes for PerkinElmer graphite furnace AA systems are quality tested to ensure every batch passes our demanding performance specifications for contamination, sensitivity, precision, electrical resistance, and lifetime.