You searched for: Electrodes

Supplier: Hach

sensION+ 9652 is a half-cell (reference not integrated) chloride ion selective electrode with an epoxy body and non-replaceable crystalline membrane selective to chloride ions in solution.

Supplier: Mettler - Toledo

pH electrodes with S7, BNC or MultiPin™ (pH/temperature) connector.

Supplier: SI Analytics

These low-maintenance electrodes are ideal for measuring in drinking water, industrial water and sewage range.

Supplier: Hach

Robust digital puncture pH electrode with stainless steel body, Ag/AgCl reference system and built-in temperature sensor.

Supplier: SI Analytics

When digital IDS sensors are connected to the measuring device, they automatically identify themselves with their serial numbers and type designation and transmit their calibration data to the device.

Supplier: Thermo Orion

These fluoride electrodes are designed for measuring free fluoride ions in aqueous solutions quickly, simply, accurately and economically.

Supplier: HAMILTON BONADUZ

These robust combination pH electrodes are suitable for general laboratory applications, especially for measurements in emulsions and suspensions.

Supplier: Mettler - Toledo

Reference electrodes with S7 connector.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: Mettler - Toledo

pH electrode with glass body and S7 screw head. Recommended for applications where the life time of the pH electrode is significantly shorter than the reference electrode.

Supplier: Hach

sensION+ 5059 is a combination multi-parameter electrode for determination of pH, conductivity and temperature. It has a plastic body, non-refillable gel reference electrolyte and built-in temperature sensor.

Supplier: Thermo Orion

These potassium electrodes are designed to measure potassium in aqueous solutions simply, accurately and economically.

Supplier: Mettler - Toledo

Ideal for a wide range of applications including emulsions, suspensions, effluent water, and solutions containing proteins and sulfides. Electrode meets IP 67 specifications, allowing the sensor to be immersed in water to a depth of 1 m for one hour without any water incursion.

Supplier: SI Analytics

AquaLine electrodes are ideal for measuring applications in drinking water, industrial water and sewage range.

Supplier: Mettler - Toledo

A glass-body, combination pH electrode with SteadyForce™ and S7 screw head for inline measurements in flow-through cell 611.

Supplier: Thermo Orion

These electrodes are designed for measuring sodium in aqueous solutions quickly, accurately and economically.

Supplier: SI Analytics

Single platinum electrode, with glass shaft and ring shaped sensor (Ø 6 mm). For titration purposes.

Supplier: SI Analytics

Reference electrodes with glass shaft.

Supplier: Hach

sensION+ 5056 is a combination platinum ORP electrode with a glass body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ labpratory pH (mV) meters.

Supplier: Mettler - Toledo

This gas-sensing electrode is intended for reliably measuring the ammonia content (NH₃).

Supplier: Thermo Orion

These electrodes are designed for measuring iodide ions in quickly, simply, accurately and economically.

Supplier: MBV

Electrode, Other, Sensor board for MAS-100

Supplier: Thermo Orion

These electrodes are designed for measuring lead ions in aqueous solutions quickly, simply, accurately and economically.

Supplier: Hach

Digital combination ORP/Redox probes with built-in temperature sensor. Ideal for measuring absolute mV values in wastewater, drinking water and general applications.

Supplier: Mettler - Toledo

Redox electrodes with S7 connector.

Supplier: Thermo Orion

This surfactant half cell is a potentiometric sensor for end point detection in titrations of anionic or cationic surfactants in a solution. A potentiometric sensor, it is a surfactant-detecting electrode in anionic or cationic titration which is specifically designed for use on the Orion 960 Autochemistry system.

Supplier: Hach

The LBOD101 is a digital, luminescent dissolved oxygen (LDO) sensor with a replaceable, integrated stirring system. The electrode measures the dissolved oxygen for BOD (Biochemical Oxygen Demand) determination in BOD bottles in BOD5 testing applications. Ideal for initial and final dissolved oxygen measurements.

Supplier: Thermo Orion

These electrodes are designed for measuring total residual chlorine quickly and accurately.

Supplier: Thermo Orion

These electrodes are designed for measuring bromide ions in aqueous solutions quickly, simply and economically.

Supplier: Hach

Digital high-performance pH electrodes with Red Rod reference system and built-in temperature sensor.