You searched for: Electrodes

Supplier: METROHM

Surfactant electrodes for two-phase titration.

Supplier: CONSORT

Electrode, ORP, Platinum ORP (redox) electrode, 0...±2000 mV, Single junction, sealed, 0...+80 °C, Epoxy, Ø×L: 12×110 mm, S7

Supplier: Cole-Parmer

A variety of pH electrodes for your Jewnay meters.

Supplier: CONSORT

These combination electrodes have an epoxy body.

Supplier: Cole-Parmer

Electrode, redox, Redox electrode, 0 - 1000 mV, Redox electrode, platinum, 0...+80 °C, Glass, Ø×L: 12×120 mm, BNC, 1 m cable

Supplier: Cole-Parmer

Electrode, Multi-Parameter

Supplier: HORIBA

Electrode, Other, Turbidity sensor 7801, for U-53 / U-53G meters

Supplier: Hanna

These pH electrodes are suitable for measuring the pH value in different types of food.

Supplier: Cole-Parmer

Combined electrodes for use with Jenway ion meters.

Supplier: HORIBA

Electrode, Dissolved Oxygen

Supplier: Lovibond

Combined pH/temperature electrode with temperature sensor NTC 30 kOhm and BNC connection.

Supplier: Cole-Parmer

Electrode, pH, Combination pH electrode, pH: 1 - 14, 0...+130 °C, Glass, Diaphr.: Porous PTFE, Electrolyte: 4.0M KCl/AgCl (refillable), Ø×L: 12×120 mm, BNC, 1 m cable, For: Aggressive chemical solutions

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: HORIBA

Electrode, pH

Supplier: Endress+Hauser

Compact panel transmitter for a pH/ORP, conductivity or dissolved oxygen measuring point.

Supplier: CONSORT

A range of conductivity electrodes for different applications.

Supplier: WTW ONLINE

In-situ combination sensor for direct measurements of ammonium and nitrate using only one sensor. Designed for the installation of a measuring electrode, a reference electrode and a compensation electrode.

Supplier: Endress+Hauser

Digital all-round ORP sensor with low maintenance requirements and long service life.

Supplier: WTW ONLINE

The special design of the process line electrodes makes them close to optimal in their accuracy, stability, speed and longevity to liquid electrolyte electrodes. For the use in pipelines, they can be installed into the replacement fitting CHEMtrac 830 M.

Supplier: WTW ONLINE

This system – consisting of a robust, digital armature with ammonium replacement electrode and ammonium reference electrode – allows ammonium measurement directly in the medium, without sample preparation. The system is designed for connection to the IQ SENSOR NET multiparameter measuring system.

Supplier: CHEMPUR

This design consists of of a slit gauze cylinder containing a concentrically positioned wire spiral.

Supplier: WTW ONLINE

The SensoLyt® measuring chains with arming are easy to install and boast flexible measuring and application areas. Eletrodes without arming can be connected directly to a pH monitor of the EcoLine® or QuadroLine® series. Depending on the application, they can be installed into a flow vessel.

Supplier: CONSORT

Electrode, pH, SP23Y, pH: 0 - 14, +5...+110 °C, Glass, Diaphr.: Double junction, Electrolyte: Sealed, Ø×L: 12×110 mm, S8, For: Alkaline solutions, high temperature fluids, photo baths, ink

Supplier: WTW ONLINE

Electrode, Dissolved Oxygen, Ecoline, TriOxmatic® 690-7, 0 - 60 mg/l; 0 - 600%, 196 mm, 7 m cable, with watertight plug (IP65)

Supplier: Hach

The innovative technology of Hach’s inductive conductivity sensors eliminates polarization and electrode coating problems in harsh environments. The sensor comes complete with standard sensor cable length of 6 m, digital gateway, and a 1 m digital extension cable.

Supplier: CONSORT

Electrode, pH, SP21X, pH: 0 - 14, 0...+100 °C, Glass, Diaphr.: Single junction, Electrolyte: Refillable, Ø×L: 12×110 mm, S7, For: General purposes

Supplier: WTW ONLINE

With the NitraLyt® Plus 700 IQ, nitrate can be determined directly in the medium. This makes measured values available in a timely manner and they can easily be used for regulation purposes.

Supplier: WTW ONLINE

To optimally satisfy the various requirements for a wide range of wastewater and water applications, the TriOxmatic® series offers the choice of several D.O sensors with different operating specifications. All models are based on the potentiostatic 3-electrode principle and have the same reliability and precision; however, their resolutions, response times and required flow rates are adapted to suit different applications.

Supplier: Agilent

Unlike single-layer breathable membrane electrodes, Agilent electrodes are made from multi-layered composite materials for extra durability. They also feature a specific barrier to protect the glass bubble against breakage.

Supplier: CONSORT

General purpose conductivity electrode for measuring low and medium coductivities.