Multi-Element Standards

Supplier: Merck

Multi-Element Standard, Trace Metals 1-WP, Supelco®, Matrix: 5% HNO₃, Application: ICP standards, AAS standards, Environmental standards

Supplier: Merck

Periodic table mix 1 for ICP used as a standard for the quantitative determination of mineral composition in Tenualosa ilisha using inductively coupled plasma atomic emission spectroscopy (ICP-AES).

Supplier: Merck

Multi-element standard solution 1 has been used in the analysis of pollutants like trace elements in water using total reflection x-ray fluorescence (TXRF) method and inductively coupled plasma mass spectrometry(ICP-MS).

Supplier: LGC Standards PROMOCHEM

Multi-Element Standard, ICP-MS setup solution (8 components), 1 µg/ml each of Be, Ce, Fe, In, Li, Mg, Pb, U, Matrix: H₂O/tr HNO₃, Application: ICP-MS standards

Supplier: Merck

For the new adapted USP <232> and Ph.Eur.Suppl. 9.3 chapters, Merck offers TraceCERT® element mixes with element ratio corresponding to the oral concentrations of the ICH Q3D guideline, Standard 1 is a mix which covers class 1, 2A and some of 2B elements; Standard 2 is a mix which covers the remaining 2B class elements; Standard 3 is a mix which covers all class 3 elements.

Supplier: CUSTOM MADE CHEMICALS LAB

500 ml solution contains 50 mg/L Al, As, Ba,Cd, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, Zn and 500 mg/L K in 5% HNO₃.

Supplier: Merck

27 components:

Supplier: Merck

Multi-Element Standard, Multi-element standard solution 3 for ICP, TraceCERT®, Supelco®, Matrix: 5% HNO₃, Application: ICP standards

Supplier: Merck

Multi-Element Standard, Periodic table mix 2 for ICP, 10 mg/L, TraceCERT®, Supelco®, Matrix: 5% HCl/tr HF, Application: AAS standards, ICP standards

Supplier: LGC Standards PROMOCHEM

This standard solution is intended for use as a certified reference material and calibration standard for inductively coupled plasma optical emission spectroscopy (ICP-OES), inductively coupled plasma mass spectrometry (ICP-MS) or alternative techniques, such as and flame or furnace atomic absorption spectroscopy (AA or GFAA).

Supplier: PerkinElmer

Designed to contain virtually every element in the mass spectrum for concentration checks.

Supplier: Merck

Multi-Element Standard, ICP multi-element standard solution VI 30 elements in dilute nitric acid, Certipur®, Application: ICP standards

Supplier: Merck

Multi-Element Standard, ICP multi-element standard solution IV 23 elements, Certipur®, Matrix: Nitric acid dil., Application: ICP standards

Supplier: CUSTOM MADE CHEMICALS LAB

16 components: Ag 10 mg/l, Al 100 mg/l, As 100 mg/l, Ba 50 mg/l, Be 5 mg/l, Cd 5 mg/l, Co 50 mg/l, Cr 20 mg/l, Cu 50 mg/l, Fe 20 mg/l, Mn 20 mg/l, Ni 50 mg/l, Pb 100 mg/l, Sb 100 mg/l, Se 100 mg/l, Tl 100 mg/l in 5% HNO₃.

Supplier: PerkinElmer

10 µg/ml: Ag, Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cs, Cu, Fe, Ga, In, K, Li, Mg, Mn, Na, Ni, Pb, Rb, Se, Sr, Tl, U, V, Zn

Supplier: LGC Standards PROMOCHEM

Multi element standards for Au, Ir, Os, Pd, Pt, Re, Rh, Ru at 100 µg/ml in 20% HCl.