You searched for: Fittings and Connectors

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: VICI JOUR RESEARCH

Low pressure adapter, PP, plug 1/4” -28 male, PP

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: Agilent

InfinityLab Quick Connect fittings are 'finger-tight' reusable fittings for UHPLC, stable to 1300 bar.

Supplier: Merck

Swagelok®, Swagelok® Nut, Front and Back Ferrule Set,400-S, brass, 1/4 in, Brass

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-482T-01, flanged nut, ETFE natural, for 1/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: VICI JOUR RESEARCH

Adapter, connects safety exhaust filter to SCAT® waste caps and A.I.T. smart waste caps

Supplier: VICI JOUR RESEARCH

These fingertight PP adapters are used with ¹/₄" PEEK and stainless hex-head nuts, converting them into colour coded fingertight fittings.

Supplier: VICI JOUR RESEARCH

These plugs and caps are used for plugging ports and capping solvent lines.

Supplier: VICI JOUR RESEARCH

PEEK tees and crosses, high pressure, for easy connection of solvent lines.

Supplier: Restek

These non-reusable column caps increase column lifetime, prevent moisture and air from entering the column during storage.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: Agilent

Agilent adapters are equivalent to the PerkinElmer FIMS/FIAS versions, so you can be confident that they will integrate seamlessly with your PerkinElmer AA system.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK polymer.

Supplier: VICI JOUR RESEARCH

These VICI Jour® nuts incorporate a unique PEEK double ferrule which grips the tubing in two places for added security, especially with PEEK or Tefzel tubing. For virtually any ¹/₁₆'' OD fittings eg. Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch.

Supplier: Merck

Plug, 400-P, 6,35 mm, Brass

Supplier: VICI JOUR RESEARCH

PEEK two-piece fingertight fittings. Fits any 10 to 32 fitting. Works with any ¹/₁₆'' OD tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® Super Flangeless™, P-258B, ferrule, ETFE, blue, ETFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-245, flangeless fitting for 1/16" OD tubing, PFA natural/ETFE blue, 1/4-28 flat-bottom port, standard knurl

Supplier: VICI JOUR RESEARCH

Plugs can be used to close off an unused port in a valve or manifold. Size ¹/₄ - 28".

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: PIEPER FILTER

Mini connectors for tubing, made of PP, translucent, T-shape.