Homogenisers Bench

Supplier: VWR Collection

A ball mill for disintregration of small sample volumes that can also be used to shake/mix microtubes and microplates. Wide range of applications in different scientific fields from geology to biotechnology.

Supplier: VWR Collection

The VWR® Bead Mill homogeniser is a part of the newest generation of Bead Mill homogenisers. This economical system is specifically designed for grinding, lysing and homogenisation of up to 16 samples. Using sample tubes pre-filled with a variety of lysing beads, the VWR Bead Mill vigorously and uniformly shakes the tubes providing an efficient, consistent high yield and quality homogenisation usually in less than 40 seconds.

Supplier: VWR Collection

These compact homogenisers are suitable for all standard dispersing tasks and intensive mixing. The units are robust, and their stability prevents pulsation oscillations and vibrations, it is also simple and safe to change aggregates for different tasks.

Supplier: VWR Collection

The VWR® 4-place Mini Bead Mill homogeniser is compact and powerful.

Supplier: KINEMATICA

Stand model, digital, volume range 0,1 ml to 10 litres. Powerful unit for a wide range of dispersing and homogenising applications in the laboratory using the rotor/stator principle. Remote operation can be achieved with PC control using the supplied software and selection of the AUTO–mode.

Supplier: KINEMATICA

Stand model, volume range 0,05 to 2500 ml for dispersing, homogenising, extractions, cell disruption, mixing, emulsifying and suspending. This model replaces the PT 1600 E and the PT 2100 incorporating the best aspects of both models.

Supplier: KINEMATICA

Stand model, volume range 0,1 ml to 30 litres. The powerful PT 6100D was designed to deliver exactly reproducible homognising conditions for volumes up to 30 litres with the option to select and vary speed and time of operation, whilst monitoring the temperature. The unit can be controlled via the membrane keypad or from a PC using KIN software via an RS232 interface.

Supplier: KINEMATICA

Stand model, volume range 0,1 to 10000 ml. Benchtop homogeniser with powerful motor and space-saving slimline design, which is easy to handle. Ideal for any dispersing and homogenising task. Interchangeable drive extensions mean different types of stand can be used.

Supplier: VWR Collection

VWR® Bead Mill MAX is the premier model in the VWR Bead Mill homogeniser range. VWR Bead Mill MAX is designed to grind, lyse or homogenise the most difficult samples with repeatable results. The unique tube carriage motion ensures the intra-tube bead movement reduces swirling, and creates the highest bead impact force of any bead mill on the market.

Supplier: IKA

The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.

Supplier: IKA

T 25 mini control is a high-performance dispersing instrument with a wide speed range of 600 to 25000 rpm for working volumes of up to 1,5 litres (H₂0).

Supplier: IKA

The magic LAB® is a unique and multi-functional small-scale laboratory machine. It is designed for mixing, dispersing, wet milling and incorporation of powders into liquids. The magic LAB® is most frequently used for the development of new products or for optimising of existing process techniques, particularly in the chemical, cosmetic, pharmaceutical and food industries. It is an ideal machine for continuous, circulating and batch processing with interchangeable modules. Many work parameters of the magic LAB® are identical to those of the IKA 2000 inline production machines: UTL, DR, CMS, MHD, MK and MKO. Therefore, the magic LAB® ensures a reliable scale-up by offering the possibility to work with the same method from formulation development to mass production. The basic in-line machine is equipped with the single-stage dispersing module ULTRA-TURRAX® UTL. It is best suited for batch applications and can be adapted for the manufacturing of dispersions from coarse to fine. Compared to a conventional stirrer, the mixing time is reduced by up to 50%. Depending on the application, the basic unit can be modified quickly with different working modules.

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 2 mm yellow zirconia beads and a 4 mm black ceramic sphere.

Supplier: MP Biomedicals

FastPrep®-24 5G is a high speed bench top homogeniser offering the ultimate in speed and performance for the lysis of biological samples. It uses a unique, optimised motion to disrupt cells through the multi-directional, simultaneous beating of specialised Lysing Matrix beads on the sample material. Developed for difficult and resistant samples, the FastPrep®-24 5G instrument lyses thoroughly and quickly any tissues and cells and allows easy and reproducible isolation of stable RNA, active proteins and full-length genomic DNA.

Supplier: IKA

The T 25 easy clean digital is a high-performance dispersing instrument with electronic speed control from 3000 - 25000 rpm for working volumes of 1 - 2000 ml (H₂O).

Supplier: MP Biomedicals

Each impact-resistant 2 ml tube contains 1 mm silica spheres. Lysing Matrix C tubes have red caps and are found in the FastRNA™ Pro Red Kit and FastProtein Red Matrix. Lysing Matrix C is used primarily for lysis of yeast and fungi and can also be used for moulds, spores and filamentous algae.