Refine results

Active filters Clear criteria

Apply

  • Show more

Add filters

Additives

Refine results
Product Appearance Mix Ratio Data Sheet Comment
MED-4502-1 White 1 PART Download MED-4502-1 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance White
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4502-2 Black 1 PART Download MED-4502-2 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Black
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4502-3 Red 1 PART Download MED-4502-3 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Red
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4502-4 Orange 1 PART Download MED-4502-4 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Orange
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4502-5 Yellow 1 PART Download MED-4502-5 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Yellow
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4502-6 Green 1 PART Download MED-4502-6 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Green
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4502-7 Blue 1 PART Download MED-4502-7 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Blue
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED-4800-1 White 1 PART Download MED-4800-1 data sheet N/A

Product Details

Property Average Result
Appearance White
Mix Ratio 1 PART

View more

MED-4800-2 Black 1 PART Download MED-4800-2 data sheet N/A

Product Details

Property Average Result
Appearance Black
Mix Ratio 1 PART

View more

MED-4800-3 Red 1 PART Download MED-4800-3 data sheet N/A

Product Details

Property Average Result
Appearance Red
Mix Ratio 1 PART

View more

MED-4800-4 Orange 1 PART Download MED-4800-4 data sheet N/A

Product Details

Property Average Result
Appearance Orange
Mix Ratio 1 PART

View more

MED-4800-5 Yellow 1 PART Download MED-4800-5 data sheet N/A

Product Details

Property Average Result
Appearance Yellow
Mix Ratio 1 PART

View more

MED-4800-6 Green 1 PART Download MED-4800-6 data sheet N/A

Product Details

Property Average Result
Appearance Green
Mix Ratio 1 PART

View more

MED-4800-7 Dark Blue 1 PART Download MED-4800-7 data sheet N/A

Product Details

Property Average Result
Appearance Dark Blue
Mix Ratio 1 PART

View more

MED1-4502-2 Black 1 PART Download MED1-4502-2 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Black
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED1-4502-7 Blue 1 PART Download MED1-4502-7 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Blue
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED1-4800-2 Black 1 PART Download MED1-4800-2 data sheet N/A

Product Details

Property Average Result
Appearance Black
Mix Ratio 1 PART

View more

MED1-4800-7 Blue 1 PART Download MED1-4800-7 data sheet N/A

Product Details

Property Average Result
Appearance Blue
Mix Ratio 1 PART

View more

MED2-4502 White 1 PART Download MED2-4502 data sheet HCR Masterbatch, 75% BaSO4

Product Details

Property Average Result
Appearance White
Mix Ratio 1 PART
Comment HCR Masterbatch, 75% BaSO4

View more

MED2-4502-6 Green 1 PART Download MED2-4502-6 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Green
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED2-4800 White 1 PART Download MED2-4800 data sheet LSR Masterbatch, 50% BaSO4

Product Details

Property Average Result
Appearance White
Mix Ratio 1 PART
Comment LSR Masterbatch, 50% BaSO4

View more

MED2-4800-6 Green 1 PART Download MED2-4800-6 data sheet N/A

Product Details

Property Average Result
Appearance Green
Mix Ratio 1 PART

View more

MED3-4502 White 1 PART Download MED3-4502 data sheet HCR Masterbatch, 75% TiO2

Product Details

Property Average Result
Appearance White
Mix Ratio 1 PART
Comment HCR Masterbatch, 75% TiO2

View more

MED3-4502-8 Violet 1 PART Download MED3-4502-8 data sheet Masterbatch to add color to HCR platinum cure systems

Product Details

Property Average Result
Appearance Violet
Mix Ratio 1 PART
Comment Masterbatch to add color to HCR platinum cure systems

View more

MED3-4800 White 1 PART Download MED3-4800 data sheet LSR Masterbatch, 50% TiO2

Product Details

Property Average Result
Appearance White
Mix Ratio 1 PART
Comment LSR Masterbatch, 50% TiO2

View more

MED3-4800-8 Violet 1 PART Download MED3-4800-8 data sheet N/A

Product Details

Property Average Result
Appearance Violet
Mix Ratio 1 PART

View more

MED50-4800-1 Translucent White 1 PART Download MED50-4800-1 data sheet N/A

Product Details

Property Average Result
Appearance Translucent White
Mix Ratio 1 PART

View more

MED50-4800-2 Translucent Black 1 PART Download MED50-4800-2 data sheet N/A

Product Details

Property Average Result
Appearance Translucent Black
Mix Ratio 1 PART

View more

MED50-4800-3 Translucent Red 1 PART Download MED50-4800-3 data sheet N/A

Product Details

Property Average Result
Appearance Translucent Red
Mix Ratio 1 PART

View more

MED50-4800-4 Translucent Orange 1 PART Download MED50-4800-4 data sheet N/A

Product Details

Property Average Result
Appearance Translucent Orange
Mix Ratio 1 PART

View more

MED50-4800-5 Translucent Yellow 1 PART Download MED50-4800-5 data sheet N/A

Product Details

Property Average Result
Appearance Translucent Yellow
Mix Ratio 1 PART

View more

MED50-4800-7 Translucent Dark Blue 1 PART Download MED50-4800-7 data sheet N/A

Product Details

Property Average Result
Appearance Translucent Dark Blue
Mix Ratio 1 PART

View more

MED51-4800-2 Black 1 PART Download MED51-4800-2 data sheet N/A

Product Details

Property Average Result
Appearance Black
Mix Ratio 1 PART

View more

MED51-4800-7 Translucent Blue 1 PART Download MED51-4800-7 data sheet N/A

Product Details

Property Average Result
Appearance Translucent Blue
Mix Ratio 1 PART

View more

Adhesives/Sealants

Product Substrate Cure Type Mix Ratio Rheology Work Time Cure System Durometer Data Sheet Comment
MED-1131 Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium RTV 1 PART Thixotropic / non-slump N/A Oxime 35 Type A Download MED-1131 data sheet Non-acidic leaving group

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Thixotropic / non-slump
Appearance Translucent
Cure 7 days / RTV
Cure System Oxime
Durometer 35 Type A
Elongation 330 %
Flow Rate 0.4 in (10.16 mm)
Specific Gravity 1.1
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium
Tack Free Time 20 minutes
Tear 45 ppi (7.94 kN/m)
Tensile 890 psi (6.14 MPa)
Comment Non-acidic leaving group

View more

MED-1137 Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate RTV 1 PART Thixotropic / non-slump N/A Acetoxy 30 Type A Download MED-1137 data sheet Low-slump, solvent-free translucent silicone

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Thixotropic / non-slump
Appearance Translucent
Cure 72 hours / RTV
Cure System Acetoxy
Durometer 30 Type A
Elongation 560 %
Extrusion Rate 180 g/minute
Flow Rate 0.2 in (5.08 mm)
Specific Gravity 1.07
Stress at Strain 170 psi / 200 % (1.17 MPa / 200 %)
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time 9 minutes
Tensile 700 psi (4.83 MPa)
Comment Low-slump, solvent-free translucent silicone

View more

MED-1511 Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel RTV 1 PART Flowable / Self Leveling N/A Acetoxy 25 Type A Download MED-1511 data sheet Low flow

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 72 hours / RTV
Cure System Acetoxy
Durometer 25 Type A
Elongation 680 %
Extrusion Rate 100 g/minute
Specific Gravity 1.12
Stress at Strain 130 psi / 200 % (0.9 MPa / 200 %)
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel
Tack Free Time 12 minutes
Tear 95 ppi (16.75 kN/m)
Tensile 1,440 psi (9.93 MPa)
Comment Low flow

View more

MED-1540 Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium RTV 1 PART Flowable / Self Leveling N/A Acetoxy 23 Type A Download MED-1540 data sheet High flow

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 72 hours / RTV
Cure System Acetoxy
Durometer 23 Type A
Elongation 340 %
Flow Rate 2.7 in (68.58 mm)
Specific Gravity 1.03
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium
Tack Free Time 9.5 minutes
Tear 17 ppi (3 kN/m)
Tensile 265 psi (1.83 MPa)
Comment High flow

View more

MED-2000 Primerless: Glass / Polyurethane / Aluminum / Silicone / Titanium / With Primer: Polycarbonate RTV 1 PART Flowable / Self Leveling N/A Acetoxy 25 Type A Download MED-2000 data sheet Medium flow, high extrusion rate

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 72 hours / RTV
Cure System Acetoxy
Durometer 25 Type A
Elongation 800 %
Extrusion Rate 2.5 g/minute
Specific Gravity 1.08
Stress at Strain 105 psi / 200 % (0.72 MPa / 200 %)
Substrate Primerless: Glass / Polyurethane / Aluminum / Silicone / Titanium / With Primer: Polycarbonate
Tack Free Time 13 minutes
Tear 80 ppi (14.11 kN/m)
Tensile 1,375 psi (9.48 MPa)
Comment Medium flow, high extrusion rate

View more

MED1-4213 Primerless: Aluminum / Glass / PMMA / Polyurethane / Silicone / Polycarbonate / With Primer: ABS / Polycarbonate / Polyimide / Polysulphone / Polyurethane / PEEK / Polyetherimide / Stainless steel Heat Cure / RTV 1:1 Thixotropic / non-slump 15 minutes Platinum 20 Type A Download MED1-4213 data sheet Quick cure, high extrusion rate

Product Details

Property Average Result
Cure Type Heat Cure / RTV
Mix Ratio 1:1
Rheology Thixotropic / non-slump
Work Time 15 minutes
Appearance Translucent
Cure 24 hours / 25 °C
Cure System Platinum
Durometer 20 Type A
Elongation 800 %
Specific Gravity 1.12
Substrate Primerless: Aluminum / Glass / PMMA / Polyurethane / Silicone / Polycarbonate / With Primer: ABS / Polycarbonate / Polyimide / Polysulphone / Polyurethane / PEEK / Polyetherimide / Stainless steel
Tear 130 ppi (22.93 kN/m)
Tensile 1,000 psi (6.9 MPa)
Viscosity 80,000 cP (80,000 mPa*s)
Comment Quick cure, high extrusion rate

View more

MED2-4213 Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: Plastic / Polycarbonate / Polyetherimide / Polysulphone / PEEK / Stainless steel / Polyimide / Polyurethane Heat Cure 1:1 Thixotropic / non-slump 15 hours Platinum 15 Type A Download MED2-4213 data sheet Quick cure, high extrusion rate

Product Details

Property Average Result
Cure Type Heat Cure
Mix Ratio 1:1
Rheology Thixotropic / non-slump
Work Time 15 hours
Appearance Translucent
Cure 15 minutes / 150 °C
Cure System Platinum
Durometer 15 Type A
Elongation 800 %
Specific Gravity 1.12
Substrate Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: Plastic / Polycarbonate / Polyetherimide / Polysulphone / PEEK / Stainless steel / Polyimide / Polyurethane
Tear 130 ppi (22.93 kN/m)
Tensile 1,000 psi (6.9 MPa)
Viscosity 80,000 cP (80,000 mPa*s)
Comment Quick cure, high extrusion rate

View more

MED3-4213 Primerless: Aluminum / Glass / PMMA / Polycarbonate / Polyurethane / Silicone / With Primer: ABS / PEEK / Polycarbonate / Polyetherimide / Polyimide / Polysulphone / Polyurethane / Stainless steel Heat Cure / RTV 1:1 Thixotropic / non-slump 60 minutes Platinum 20 Type A Download MED3-4213 data sheet Quick cure, high extrusion rate

Product Details

Property Average Result
Cure Type Heat Cure / RTV
Mix Ratio 1:1
Rheology Thixotropic / non-slump
Work Time 60 minutes
Appearance Translucent
Cure 24 hours / 25 °C
Cure System Platinum
Durometer 20 Type A
Elongation 800 %
Specific Gravity 1.12
Substrate Primerless: Aluminum / Glass / PMMA / Polycarbonate / Polyurethane / Silicone / With Primer: ABS / PEEK / Polycarbonate / Polyetherimide / Polyimide / Polysulphone / Polyurethane / Stainless steel
Tear 130 ppi (22.93 kN/m)
Tensile 1,000 psi (6.9 MPa)
Viscosity 80,000 cP (80,000 mPa*s)
Comment Quick cure, high extrusion rate

View more

Coatings/Dispersions

Product Cure System Viscosity Non Volatile Content Durometer Data Sheet Comment
MED-2214 Platinum 3,700 cP 35 % 35 Type A Download MED-2214 data sheet One Part, Requires heat to cure

Product Details

Property Average Result
Cure System Platinum
Viscosity 3,700 cP (3,700 mPa*s)
Non Volatile Content 35 %
Durometer 35 Type A
Appearance Translucent
Cure 60 minutes / 50 °C
Elongation 850 %
Mix Ratio 1 Part
Tear 170 ppi (29.98 kN/m)
Tensile 1,700 psi (11.72 MPa)
Comment One Part, Requires heat to cure

View more

MED-6400 Platinum 860 cP 35 % 30 Type A Download MED-6400 data sheet 1.43 R.I. in Xylene

Product Details

Property Average Result
Cure System Platinum
Viscosity 860 cP (860 mPa*s)
Non Volatile Content 35 %
Durometer 30 Type A
Appearance Translucent
Cure 30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Cure Type Heat Cure
Elongation 850 %
Mix Ratio 1:1
Refractive Index 1.43
Rheology Flowable/Self Leveling
Tear 160 ppi (28.22 kN/m)
Tensile 1,600 psi (11.03 MPa)

View more

MED-6600 Platinum 350 cP 35 % 25 Type A Download MED-6600 data sheet 1.46 R.I. in Xylene

Product Details

Property Average Result
Cure System Platinum
Viscosity 350 cP (350 mPa*s)
Non Volatile Content 35 %
Durometer 25 Type A
Appearance Translucent
Cure 30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation 800 %
Mix Ratio 1:1
Refractive Index 1.46
Specific Gravity 1.1
Stress at Strain 300 psi / 300 % (2.07 Mpa / 300 %)
Tear 160 ppi (28.22 kN/m)
Tensile 1,200 psi (8.28 MPa)
Work Time 24 hours
Comment 1.46 R.I. in Xylene

View more

MED-6601 N/A N/A N/A 24 Type A Download MED-6601 data sheet 100% solids

Product Details

Property Average Result
Durometer 24 Type A
Appearance Translucent
Elongation 800 %
Stress at Strain 320 psi / 300 % (2.21 Mpa / 300 %)
Tear 150 ppi (26.46 kN/m)
Tensile 1,200 psi (8.28 MPa)
Comment 100% solids

View more

MED-6605 Acetoxy 700 cP 29 % 25 Type A Download MED-6605 data sheet One Part, in Xylene

Product Details

Property Average Result
Cure System Acetoxy
Viscosity 700 cP (700 mPa*s)
Non Volatile Content 29 %
Durometer 25 Type A
Appearance Translucent
Cure 5 days / RTV
Elongation 980 %
Mix Ratio 1 PART
Refractive Index 1.40
Specific Gravity 1.09
Stress at Strain 110 psi / 300 % (0.76 Mpa / 300 %)
Tear 120 ppi (21.16 kN/m)
Tensile 1,500 psi (10.34 MPa)
Comment One Part, in Xylene

View more

MED-6615 Platinum 65 cP 32 % 72 Type 00 Download MED-6615 data sheet Silicone adhesive dispersed in heptane, cures rapidly with heat

Product Details

Property Average Result
Cure Type Heat Cure
Mix Ratio 1:1
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 30 minutes / RTV
Cure System Platinum
Durometer 72 Type 00
Elongation 750 %
Non Volatile Content 32 %
Substrate Primerless: Aluminum / Glass / PMMA / Silicone / With Primer: ABS / PEEK / Polycarbonate / Polyimide / Polysulphone / Polyetherimide / Polyurethane / Stainless steel
Tear 120 ppi (21.16 kN/m)
Tensile 1,060 psi (7.31 MPa)
Viscosity 65 cP (65 mPa*s)
Comment Silicone adhesive dispersed in heptane, cures rapidly with heat

View more

MED-6640 Platinum 3,000 cP 20 % 40 Type A Download MED-6640 data sheet Ultra High Tear, in Xylene

Product Details

Property Average Result
Cure System Platinum
Viscosity 3,000 cP (3,000 mPa*s)
Non Volatile Content 20 %
Durometer 40 Type A
Appearance Translucent
Cure 30 minutes / 25 °C 45 minutes / 75 °C 135 minutes / 150 °C
Elongation 1,000 %
Mix Ratio 1:1
Refractive Index 1.41
Specific Gravity 1.41
Stress at Strain 150 psi / 100 % (1.03 MPa / 100 %)
Tear 300 ppi (52.91 kN/m)
Tensile 1,700 psi (11.72 MPa)
Work Time 24 hours
Comment Ultra High Tear, in Xylene

View more

MED-6655 Acetoxy 700 cP 60 % 35 Type A Download MED-6655 data sheet 100M% Fluorosilicone

Product Details

Property Average Result
Cure System Acetoxy
Viscosity 700 cP (700 mPa*s)
Non Volatile Content 60 %
Durometer 35 Type A
Appearance White
Cure 3 days / RTV
Cure Type RTV
Elongation 425 %
Mix Ratio 1 PART
Rheology Flowable / Self Leveling
Tack Free Time 80 minutes
Tear 45 ppi (7.94 kN/m)
Tensile 775 psi (5.34 MPa)
Comment 100M% Fluorosilicone

View more

MED-6670 Platinum N/A 25 % N/A Download MED-6670 data sheet Low Coefficient of Friction Coating

Product Details

Property Average Result
Cure System Platinum
Non Volatile Content 25 %
Appearance Translucent
Cure 5 minutes / RTV
Mix Ratio 1:1
Specific Gravity 0.96
Work Time 24 hours
Comment Low Coefficient of Friction Coating

View more

MED-6671 Acetoxy N/A N/A N/A Download MED-6671 data sheet RTV, Low Coefficient of Friction Coating

Product Details

Property Average Result
Cure System Acetoxy
Appearance Translucent
Cure 24 hours / RTV
Mix Ratio 1 Part
Comment RTV, Low Coefficient of Friction Coating

View more

MED1-4161 Condensation 140 cSt 33 % 25 Type 00 Download MED1-4161 data sheet 25 '00' durometer lubricious coating

Product Details

Property Average Result
Cure System Condensation
Viscosity 140 cSt (121.43 mPa*s)
Non Volatile Content 33 %
Durometer 25 Type 00
Appearance Clear
Cure 5 days / 25 °C
Mix Ratio 1 Part
Solvent Xylene
Specific Gravity 0.87
Comment 25 '00' durometer lubricious coating

View more

MED6-6606 Acetoxy 95 cP 30 % 20 Type A Download MED6-6606 data sheet Silicone adhesive dispersed in heptane

Product Details

Property Average Result
Cure Type RTV
Mix Ratio 1 PART
Rheology Flowable / Self Leveling
Appearance Translucent
Cure 3 days / RTV
Cure System Acetoxy
Durometer 20 Type A
Elongation 800 %
Non Volatile Content 30 %
Specific Gravity 1.11
Substrate Primerless: Aluminum / Glass / Polyurethane / Silicone / Titanium / With Primer: Polycarbonate / Stainless steel
Tear 115 ppi (20.28 kN/m)
Tensile 1,190 psi (8.21 MPa)
Viscosity 95 cP (95 mPa*s)
Comment Silicone adhesive dispersed in heptane

View more

Fluids

Product Substrate Volatile Content Viscosity Data Sheet Comment
MED-360 Glass / Metal / Plastic 0.1 % 100 cP / 350 cP / 1,000 cP / 12,500 cP Download MED-360 data sheet Dimethyl Polymer

Product Details

Property Average Result
Volatile Content 0.1 %
Viscosity 100 cP / 350 cP / 1,000 cP / 12,500 cP (100 mPa*s / 350 mPa*s / 1,000 mPa*s / 12,500 mPa*s)
Appearance Translucent
Mix Ratio 1 PART
Refractive Index 1.40
Specific Gravity 0.97
Substrate Glass / Metal / Plastic
Comment Dimethyl Polymer

View more

MED-366 N/A 0.1 % 1,000 cP Download MED-366 data sheet Highly purified Dimethyl Polymer

Product Details

Property Average Result
Volatile Content 0.1 %
Viscosity 1,000 cP (1,000 mPa*s)
Appearance Clear
Cure System Non-Curing
Mix Ratio 1 Part
Refractive Index 1.40
Specific Gravity 0.97
Comment Highly purified Dimethyl Polymer

View more

MED-367 N/A 0.1 % 5,000 cP Download MED-367 data sheet Highly purified Dimethyl Polymer

Product Details

Property Average Result
Volatile Content 0.1 %
Viscosity 5,000 cP (5,000 mPa*s)
Appearance Translucent
Cure System Non-Curing
Mix Ratio 1 Part
Refractive Index 1.40
Specific Gravity 0.97
Comment Highly purified Dimethyl Polymer

View more

MED-400 Silicone 0.3 % 350 cP / 1,000 cP / 12,500 cP Download MED-400 data sheet Fluorosilicone Polymer

Product Details

Property Average Result
Volatile Content 0.3 %
Viscosity 350 cP / 1,000 cP / 12,500 cP (350 mPa*s / 1,000 mPa*s / 12,500 mPa*s)
Substrate Silicone
Comment Fluorosilicone Polymer

View more

MED-420 Silicone 0.1 % 350 cP / 1,000 cP / 12,500 cP Download MED-420 data sheet Methyl Fluoro Copolymer (Low Fluoro Content)

Product Details

Property Average Result
Volatile Content 0.1 %
Viscosity 350 cP / 1,000 cP / 12,500 cP (350 mPa*s / 1,000 mPa*s / 12,500 mPa*s)
Substrate Silicone
Comment Methyl Fluoro Copolymer (Low Fluoro Content)

View more

MED-460 Silicone 0.1 % 350 cP / 1,000 cP / 12,500 cP Download MED-460 data sheet Methyl Fluoro Copolymer (High Fluoro Content)

Product Details

Property Average Result
Volatile Content 0.1 %
Viscosity 350 cP / 1,000 cP / 12,500 cP (350 mPa*s / 1,000 mPa*s / 12,500 mPa*s)
Substrate Silicone
Comment Methyl Fluoro Copolymer (High Fluoro Content)

View more

Foams

Product Foam Density Viscosity Cure System Application Life Appearance Data Sheet Comment
MED-2310 N/A 40,000 cP Platinum 2 minutes White Download MED-2310 data sheet Low Density

Product Details

Property Average Result
Viscosity 40,000 cP (40,000 mPa*s)
Cure System Platinum
Application Life 2 minutes
Appearance White
Mix Ratio 1:1
Comment Low Density

View more

Gels

Product Viscosity Penetration Work Time Mix Ratio Data Sheet Comment
MED-6311 500 cP 2.6 mm N/A 1:1 Download MED-6311 data sheet Low penetration, high strength gel

Product Details

Property Average Result
Penetration 2.6 mm
Viscosity 500 cP (500 mPa*s)
Mix Ratio 1:1
Appearance Clear
Cure 3.5 hours / 160 °C
Specific Gravity 0.97
Volatile Content 0.1 %
Comment Low penetration, high strength gel

View more

MED1-6300 1,000 cP 5 mm N/A 1:1 Download MED1-6300 data sheet Medium penetration, soft responsive gel

Product Details

Property Average Result
Penetration 5 mm
Viscosity 1,000 cP (1,000 mPa*s)
Mix Ratio 1:1
Appearance Translucent
Cure 5 hours / 140 °C
Cure System Platinum
Non Volatile Content 99.9 %
Specific Gravity 0.98
Volatile Content 0.1 %
Comment Medium penetration, soft responsive gel

View more

MED2-6300 1,000 cP 10 mm N/A 1:1 Download MED2-6300 data sheet Low penetration, firm cohesive gel

Product Details

Property Average Result
Penetration 10 mm
Viscosity 1,000 cP (1,000 mPa*s)
Mix Ratio 1:1
Appearance Translucent
Cure 5 hours / 140 °C
Cure System Platinum
Non Volatile Content 99.9 %
Refractive Index 1.40
Specific Gravity 0.97
Volatile Content 0.1 %
Comment Low penetration, firm cohesive gel

View more

MED3-6300 1,000 cP 15 mm N/A 3:1 Download MED3-6300 data sheet High penetration, soft responsive gel

Product Details

Property Average Result
Penetration 15 mm
Viscosity 1,000 cP (1,000 mPa*s)
Mix Ratio 3:1
Appearance Translucent
Cure 5 hours / 140 °C
Cure System Platinum
Specific Gravity 0.97
Volatile Content 0.1 %
Comment High penetration, soft responsive gel

View more

MED3-6311 500 cP 2.6 mm N/A 3:1 Download MED3-6311 data sheet High Purity, Low Penetration, High Strength Gel

Product Details

Property Average Result
Penetration 2.6 mm
Viscosity 500 cP (500 mPa*s)
Mix Ratio 3:1
Appearance Translucent
Cure 3.5 hours / 160 °C
Cure System Platinum
Non Volatile Content 99.9 %
Specific Gravity 0.97
Volatile Content 0.1 %
Comment High Purity, Low Penetration, High Strength Gel

View more

High Consistency Rubbers

Product Durometer Tensile Elongation Tear Data Sheet Comment
MED-2174 50 Type A 1,300 psi 750 % 225 ppi Download MED-2174 data sheet Uncatalyzed

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,300 psi (8.97 MPa)
Elongation 750 %
Tear 225 ppi (39.68 kN/m)
Appearance Clear
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Post Cure 4 hours / 205 °C
Specific Gravity 1.15
Stress at Strain 325 psi / 200 % (2.24 MPa / 200 %)
Comment Uncatalyzed

View more

MED-4520 28 Type A 1,320 psi 950 % 135 ppi Download MED-4520 data sheet Uncatalyzed

Product Details

Property Average Result
Durometer 28 Type A
Tensile 1,320 psi (9.1 MPa)
Elongation 950 %
Tear 135 ppi (23.81 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Post Cure 2 hours / 177 °C
Specific Gravity 1.1
Stress at Strain 105 psi / 200 % (0.72 MPa / 200 %)
Comment Uncatalyzed

View more

MED-4550 50 Type A 1,400 psi 750 % 195 ppi Download MED-4550 data sheet Uncatalyzed

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,400 psi (9.66 MPa)
Elongation 750 %
Tear 195 ppi (34.39 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Post Cure 2 hours / 177 °C
Specific Gravity 1.16
Stress at Strain 250 psi / 200 % (1.72 MPa / 200 %)
Comment Uncatalyzed

View more

MED-4565 65 Type A 1,250 psi 700 % 200 ppi Download MED-4565 data sheet Uncatalyzed

Product Details

Property Average Result
Durometer 65 Type A
Tensile 1,250 psi (8.62 MPa)
Elongation 700 %
Tear 200 ppi (35.27 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Post Cure 2 hours / 177 °C
Specific Gravity 1.21
Stress at Strain 375 psi / 200 % (2.59 MPa / 200 %)
Comment Uncatalyzed

View more

MED-4714 15 Type A 715 psi 1385 % 155 ppi Download MED-4714 data sheet Low Durometer

Product Details

Property Average Result
Durometer 15 Type A
Tensile 715 psi (4.93 MPa)
Elongation 1385 %
Tear 155 ppi (27.34 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.08
Stress at Strain 40 psi / 200 % (0.28 MPa / 200 %)
Work Time 26 hours
Comment Low Durometer

View more

MED-4719 55 Type A 1,320 psi 665 % 220 ppi Download MED-4719 data sheet Excellent adhesion and fatigue resistance

Product Details

Property Average Result
Durometer 55 Type A
Tensile 1,320 psi (9.1 MPa)
Elongation 665 %
Tear 220 ppi (38.8 kN/m)
Appearance Translucent
Cure 10 minutes / 171 °C
Cure System Platinum
Cure Type Heat Cure
Mix Ratio 1:1
Specific Gravity 1.23
Stress at Strain 280 psi / 200 % (1.9 MPa / 200 %)
Work Time 8 hours
Comment Excellent adhesion and fatigue resistance

View more

MED-4720 25 Type A 1,390 psi 1240 % 190 ppi Download MED-4720 data sheet High Tear

Product Details

Property Average Result
Durometer 25 Type A
Tensile 1,390 psi (9.59 MPa)
Elongation 1240 %
Tear 190 ppi (33.51 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.1
Stress at Strain 75 psi / 200 % (0.52 MPa / 200 %)
Work Time 10 hours
Comment High Tear

View more

MED-4725 30 Type A 1,395 psi 890 % 135 ppi Download MED-4725 data sheet Low Tension Set

Product Details

Property Average Result
Durometer 30 Type A
Tensile 1,395 psi (9.62 MPa)
Elongation 890 %
Tear 135 ppi (23.81 kN/m)
Appearance Translucent
Cure 10 minutes / 171 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.11
Stress at Strain 110 psi / 200 % (0.76 MPa / 200 %)
Work Time 2 hours
Comment Low Tension Set

View more

MED-4727 30 Type A 2,300 psi 1050 % 235 ppi Download MED-4727 data sheet High Strength, Low Modulus

Product Details

Property Average Result
Durometer 30 Type A
Tensile 2,300 psi (15.86 MPa)
Elongation 1050 %
Tear 235 ppi (41.45 kN/m)
Appearance Translucent
Cure 10 minutes / 171 °C
Mix Ratio 1:1
Specific Gravity 1.11
Stress at Strain 100 psi / 200 % (0.69 MPa / 200 %)
Work Time 2.5 hours
Comment High Strength, Low Modulus

View more

MED-4735 35 Type A 1,535 psi 1055 % 195 ppi Download MED-4735 data sheet High Tear

Product Details

Property Average Result
Durometer 35 Type A
Tensile 1,535 psi (10.59 MPa)
Elongation 1055 %
Tear 195 ppi (34.39 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.11
Stress at Strain 180 psi / 200 % (1.24 MPa / 200 %)
Work Time 2 hours
Comment High Tear

View more

MED-4750 50 Type A 1,545 psi 1050 % 270 ppi Download MED-4750 data sheet High Tear

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,545 psi (10.66 MPa)
Elongation 1050 %
Tear 270 ppi (47.62 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.16
Stress at Strain 300 psi / 300 % / 200 % (2.07 Mpa / 300 % / 200 %)
Work Time 2.5 hours
Comment High Tear

View more

MED-4755 55 Type A 1,640 psi 875 % 310 ppi Download MED-4755 data sheet Ultra-high Tear

Product Details

Property Average Result
Durometer 55 Type A
Tensile 1,640 psi (11.31 MPa)
Elongation 875 %
Tear 310 ppi (54.67 kN/m)
Appearance Translucent
Cure 10 minutes / 138 °C
Cure System Platinum
Mix Ratio 1:1
Post Cure 4 hours / 177 °C
Specific Gravity 1.14
Stress at Strain 490 psi / 200 % (3.38 MPa / 200 %)
Work Time 2.5 hours
Comment Ultra-high Tear

View more

MED-4765 65 Type A 1,240 psi 1005 % 265 ppi Download MED-4765 data sheet High Tear

Product Details

Property Average Result
Durometer 65 Type A
Tensile 1,240 psi (8.55 MPa)
Elongation 1005 %
Tear 265 ppi (46.74 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.2
Stress at Strain 355 psi / 200 % (2.45 MPa / 200 %)
Work Time 6 hours
Comment High Tear

View more

MED-4770 70 Type A 1,415 psi 760 % 300 ppi Download MED-4770 data sheet Abrasion / Fatigue Resistant

Product Details

Property Average Result
Durometer 70 Type A
Tensile 1,415 psi (9.76 MPa)
Elongation 760 %
Tear 300 ppi (52.91 kN/m)
Appearance Translucent
Cure 10 minutes / 138 °C
Cure System Platinum
Mix Ratio 1:1
Post Cure 4 hours / 177 °C
Specific Gravity 1.19
Stress at Strain 595 psi / 200 % (4.1 MPa / 200 %)
Work Time 2.5 hours
Comment Abrasion / Fatigue Resistant

View more

MED-4780 80 Type A 1,155 psi 740 % 225 ppi Download MED-4780 data sheet High Tear

Product Details

Property Average Result
Durometer 80 Type A
Tensile 1,155 psi (7.97 MPa)
Elongation 740 %
Tear 225 ppi (39.68 kN/m)
Appearance Translucent
Cure 10 minutes / 116 °C
Cure System Platinum
Mix Ratio 1:1
Specific Gravity 1.2
Stress at Strain 450 psi / 200 % (3.1 MPa / 200 %)
Work Time 8.5 hours
Comment High Tear

View more

MED4-4515 50 Type A 1,650 psi 500 % 100 ppi Download MED4-4515 data sheet Non-Vinyl Specific Peroxide Precatalyzed

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,650 psi (11.38 MPa)
Elongation 500 %
Tear 100 ppi (17.64 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Post Cure 2 hours / 249 °C
Specific Gravity 1.15
Stress at Strain 400 psi / 200 % (2.76 MPa / 200 %)
Comment Non-Vinyl Specific Peroxide Precatalyzed

View more

MED4-4516 70 Type A 1,300 psi 450 % 130 ppi Download MED4-4516 data sheet Non-Vinyl Specific Peroxide Precatalyzed

Product Details

Property Average Result
Durometer 70 Type A
Tensile 1,300 psi (8.97 MPa)
Elongation 450 %
Tear 130 ppi (22.93 kN/m)
Appearance Translucent
Cure 5 minutes / 116 °C
Cure System Peroxide
Mix Ratio 1 PART
Post Cure 2 hours / 249 °C
Specific Gravity 1.21
Stress at Strain 500 psi / 200 % (3.45 MPa / 200 %)
Comment Non-Vinyl Specific Peroxide Precatalyzed

View more

Inks

Product Appearance Mix Ratio Non Volatile Content Viscosity Data Sheet Comment
MED-6608-1 White 1 Part 70 % 1,150 cP Download MED-6608-1 data sheet RTV Ink in White

Product Details

Property Average Result
Cure System Condensation
Viscosity 1,150 cP (1,150 mPa*s)
Non Volatile Content 70 %
Mix Ratio 1 Part
Appearance White
Cure 7 days / RTV
Specific Gravity 1.13
Tack Free Time 45 minutes
Comment RTV Ink in White

View more

MED-6608-2 Black 1 Part 70 % 1,150 cP Download MED-6608-2 data sheet RTV Ink in Black

Product Details

Property Average Result
Cure System Condensation
Viscosity 1,150 cP (1,150 mPa*s)
Non Volatile Content 70 %
Mix Ratio 1 Part
Appearance Black
Cure 7 days / RTV
Specific Gravity 1.46
Tack Free Time 80 minutes
Comment RTV Ink in Black

View more

MED-6613-1 White 1:1 65 % N/A Download MED-6613-1 data sheet Heat Curable Ink in White

Product Details

Property Average Result
Cure System Platinum
Non Volatile Content 65 %
Mix Ratio 1:1
Appearance White
Cure 5 minutes / 150 °C
Comment Heat Curable Ink in White

View more

MED-6613-2 Black 1:1 60 % 800 cP Download MED-6613-2 data sheet Heat Curable Ink in Black

Product Details

Property Average Result
Cure System Platinum
Viscosity 800 cP (800 mPa*s)
Non Volatile Content 60 %
Mix Ratio 1:1
Appearance Black
Cure 5 minutes / 150 °C
Comment Heat Curable Ink in Black

View more

MED-6613-7 Dark Blue 1:1 65 % N/A Download MED-6613-7 data sheet Heat Curable Ink in Dark Blue

Product Details

Property Average Result
Cure System Platinum
Non Volatile Content 65 %
Mix Ratio 1:1
Appearance Dark Blue
Cure 5 minutes / 150 °C
Comment Heat Curable Ink in Dark Blue

View more

MED8-6608-2 Black 1 PART 70 % 800 cP Download MED8-6608-2 data sheet RTV Ink in Black, Increased Hiding Power

Product Details

Property Average Result
Cure System Oxime
Viscosity 800 cP (800 mPa*s)
Non Volatile Content 70 %
Mix Ratio 1 PART
Appearance Black
Cure 7 days / RTV
Specific Gravity 1.83
Tack Free Time 40 minutes
Comment RTV Ink in Black, Increased Hiding Power

View more

Liquid Silicone Rubbers

Product Durometer Tensile Elongation Tear Data Sheet Comment
MED-4801 38 Type 00 290 psi 1140 % 55 ppi Download MED-4801 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 38 Type 00
Tensile 290 psi (2 MPa)
Elongation 1140 %
Tear 55 ppi (9.7 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Extrusion Rate 200 g/minute
Mix Ratio 1:1
Work Time 24 hours
Comment Injection Molding Elastomer

View more

MED-4805 7 Type A 485 psi 1080 % 70 ppi Download MED-4805 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 7 Type A
Tensile 485 psi (3.34 MPa)
Elongation 1080 %
Tear 70 ppi (12.35 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Extrusion Rate 55 g/minute
Mix Ratio 1:1
Specific Gravity 1.09
Work Time 50 hours
Comment Injection Molding Elastomer

View more

MED-4810 11 Type A 700 psi 1075 % 65 ppi Download MED-4810 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 11 Type A
Tensile 700 psi (4.83 MPa)
Elongation 1075 %
Tear 65 ppi (11.46 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Extrusion Rate 100 g/minute
Mix Ratio 1:1
Specific Gravity 1.1
Stress at Strain 45 psi / 200 % (0.31 MPa / 200 %)
Work Time 70 hours
Comment Injection Molding Elastomer

View more

MED-4820 20 Type A 910 psi 875 % 125 ppi Download MED-4820 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 20 Type A
Tensile 910 psi (6.28 MPa)
Elongation 875 %
Tear 125 ppi (22.05 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Extrusion Rate 75 g/minute
Mix Ratio 1:1
Specific Gravity 1.14
Stress at Strain 65 psi / 200 % (0.45 MPa / 200 %)
Work Time 72 hours
Comment Injection Molding Elastomer

View more

MED-4830 30 Type A 1,350 psi 750 % 150 ppi Download MED-4830 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 30 Type A
Tensile 1,350 psi (9.31 MPa)
Elongation 750 %
Tear 150 ppi (26.46 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Extrusion Rate 175 g/minute
Mix Ratio 1:1
Specific Gravity 1.13
Stress at Strain 175 psi / 200 % (1.21 MPa / 200 %)
Comment Injection Molding Elastomer

View more

MED-4840 43 Type A 1,190 560 % 245 ppi Download MED-4840 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 43 Type A
Tensile 1,190 psi (8.2 MPa)
Elongation 560 %
Tear 245 ppi (43.21 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Cure Type Heat Cure
Extrusion Rate 225 g/minute
Mix Ratio 1:1
Rheology Thixotropic / Non-slump
Specific Gravity 1.12
Stress at Strain 450 psi / 200 % (3.1 MPa / 200 %)

View more

MED-4842 44 Type A 1,070 psi 400 % 250 ppi Download MED-4842 data sheet Injection Molding Elastomer, Resists Blocking

Product Details

Property Average Result
Durometer 44 Type A
Tensile 1,070 psi (7.38 MPa)
Elongation 400 %
Tear 250 ppi (44.09 kN/m)
Appearance White
Cure 10 minutes / 150 °C
Cure System Platinum
Extrusion Rate 215 g/minute
Mix Ratio 1:1
Specific Gravity 1.17
Stress at Strain 540 psi / 200 % (3.72 MPa / 200 %)
Comment Injection Molding Elastomer, Resists Blocking

View more

MED-4850 50 Type A 1,475 psi 675 % 240 ppi Download MED-4850 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,475 psi (10.17 MPa)
Elongation 675 %
Tear 240 ppi (42.33 kN/m)
Appearance Translucent
Cure 5 minutes / 150 °C
Cure System Platinum
Extrusion Rate 100 g/minute
Mix Ratio 1:1
Specific Gravity 1.14
Stress at Strain 400 psi / 200 % (2.76 MPa / 200 %)
Work Time 72 hours
Comment Injection Molding Elastomer

View more

MED-4860 60 Type A 1,350 psi 530 % 255 ppi Download MED-4860 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 60 Type A
Tensile 1,350 psi (9.31 MPa)
Elongation 530 %
Tear 255 ppi (44.97 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Cure System Platinum
Extrusion Rate 85 g/minute
Mix Ratio 1:1
Specific Gravity 1.15
Stress at Strain 600 psi / 200 % (4.14 MPa / 200 %)
Work Time 72 hours
Comment Injection Molding Elastomer

View more

MED-4870 70 Type A 1,500 psi 415 % 230 ppi Download MED-4870 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 70 Type A
Tensile 1,500 psi (10.34 MPa)
Elongation 415 %
Tear 230 ppi (40.56 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Cure System Platinum
Extrusion Rate 60 g/minute
Mix Ratio 1:1
Specific Gravity 1.16
Stress at Strain 750 psi / 200 % (5.17 MPa / 200 %)
Work Time 72 hours
Comment Injection Molding Elastomer

View more

MED-4880 80 Type A 1,030 psi 265 % 90 ppi Download MED-4880 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 80 Type A
Tensile 1,030 psi (7.1 MPa)
Elongation 265 %
Tear 90 ppi (15.87 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Cure System Platinum
Extrusion Rate 110 g/minute
Mix Ratio 1:1
Specific Gravity 1.16
Stress at Strain 650 psi / 100 % (4.48 MPa / 100 %)
Work Time 70 hours
Comment Injection Molding Elastomer

View more

MED-5440 30 Type A 1,250 psi 380 % 60 ppi Download MED-5440 data sheet 100M% Fluorosilicone Injection Molding Elastomer

Product Details

Property Average Result
Durometer 30 Type A
Tensile 1,250 psi (8.62 MPa)
Elongation 380 %
Tear 60 ppi (10.58 kN/m)
Appearance Translucent
Cure 30 minutes / 150 °C
Cure System Platinum
Extrusion Rate 40 g/minute
Mix Ratio 1:1
Specific Gravity 1.38
Comment 100M% Fluorosilicone Injection Molding Elastomer

View more

MED-5820 19 Type A 1,080 psi 890 % 90 ppi Download MED-5820 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 19 Type A
Tensile 1,080 psi (7.45 MPa)
Elongation 890 %
Tear 90 ppi (15.87 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Extrusion Rate 220 g/minute
Specific Gravity 1.08
Stress at Strain 90 psi / 200 % (0.62 MPa / 200 %)
Comment Injection Molding Elastomer

View more

MED-5830 30 Type A 1,340 psi 830 % 150 ppi Download MED-5830 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 30 Type A
Tensile 1,340 psi (9.24 MPa)
Elongation 830 %
Tear 150 ppi (26.46 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Cure System Platinum
Extrusion Rate 145 g/minute
Specific Gravity 1.11
Stress at Strain 160 psi / 200 % (1.1 MPa / 200 %)
Comment Injection Molding Elastomer

View more

MED-5840 40 Type A 1,350 psi 680 % 160 ppi Download MED-5840 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 40 Type A
Tensile 1,350 psi (9.31 MPa)
Elongation 680 %
Tear 160 ppi (28.22 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Extrusion Rate 115 g/minute
Specific Gravity 1.12
Stress at Strain 300 psi / 200 % (2.07 Mpa / 200 %)
Comment Injection Molding Elastomer

View more

MED-5850 50 Type A 1,450 psi 550 % 190 ppi Download MED-5850 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 50 Type A
Tensile 1,450 psi (10 MPa)
Elongation 550 %
Tear 190 ppi (33.51 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Extrusion Rate 75 g/minute
Specific Gravity 1.14
Stress at Strain 400 psi / 200 % (2.76 MPa / 200 %)
Comment Injection Molding Elastomer

View more

MED-5860 60 Type A 1,300 psi 425 % 200 ppi Download MED-5860 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 60 Type A
Tensile 1,300 psi (8.97 MPa)
Elongation 425 %
Tear 200 ppi (35.27 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Extrusion Rate 75 g/minute
Specific Gravity 1.14
Stress at Strain 700 psi / 200 % (4.83 MPa / 200 %)
Comment Injection Molding Elastomer

View more

MED-5870 68 Type A 1,250 psi 400 % 225 ppi Download MED-5870 data sheet Injection Molding Elastomer

Product Details

Property Average Result
Durometer 68 Type A
Tensile 1,250 psi (8.62 MPa)
Elongation 400 %
Tear 225 ppi (39.68 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Cure System Platinum
Extrusion Rate 100 g/minute
Specific Gravity 1.14
Stress at Strain 900 psi / 200 % (6.21 MPa / 200 %)
Comment Injection Molding Elastomer

View more

MED1-4855 55 Type A 1,100 psi 475 % 240 ppi Download MED1-4855 data sheet Self-Lubricating Injection Molding Elastomer, High Lubrication

Product Details

Property Average Result
Durometer 55 Type A
Tensile 1,100 psi (7.59 MPa)
Elongation 475 %
Tear 240 ppi (42.33 kN/m)
Appearance Translucent
Cure 5 minutes / 165 °C
Cure System Platinum
Extrusion Rate 230 g/minute
Mix Ratio 1:1
Specific Gravity 1.15
Stress at Strain 525 psi / 200 % (3.62 MPa / 200 %)
Comment Self-Lubricating Injection Molding Elastomer, High Lubrication

View more

MED50-5338 30 Type A 650 psi 350 % 37 ppi Download MED50-5338 data sheet 50M% Fluorosilicone Injection Molding Elastomer

Product Details

Property Average Result
Durometer 30 Type A
Tensile 650 psi (4.48 MPa)
Elongation 350 %
Tear 37 ppi (6.53 kN/m)
Appearance Translucent
Cure 30 minutes / 150 °C
Cure System Platinum
Extrusion Rate 115 g/minute
Mix Ratio 1:1
Specific Gravity 1.25
Stress at Strain 300 psi / 200 % (2.07 Mpa / 200 %)
Work Time 16 hours
Comment 50M% Fluorosilicone Injection Molding Elastomer

View more

Low Viscosity Elastomers

Product Viscosity Durometer Work Time Tensile Data Sheet Comment
MED-4211 97,800 cP 25 Type A N/A 685 psi Download MED-4211 data sheet Flowable

Product Details

Property Average Result
Durometer 25 Type A
Viscosity 97,800 cP (97,800 mPa*s)
Tensile 685 psi (4.72 MPa)
Appearance Translucent
Cure 3 minutes / 150 °C
Cure System Platinum
Elongation 530 %
Mix Ratio 10:1
Post Cure 1 hour / 150 °C
Specific Gravity 1.1
Comment Flowable

View more

MED-4244 130,000 cP 40 Type A 4 hours 865 psi Download MED-4244 data sheet Flowable, Medium Durometer

Product Details

Property Average Result
Durometer 40 Type A
Viscosity 130,000 cP (130,000 mPa*s)
Work Time 4 hours
Tensile 865 psi (5.97 MPa)
Appearance Translucent
Cure 3 minutes / 177 °C
Cure System Platinum
Elongation 350 %
Mix Ratio 10:1
Post Cure 1 hour / 150 °C
Specific Gravity 1.1
Stress at Strain 480 psi / 200 % (3.31 MPa / 200 %)
Tear 150 ppi (26.46 kN/m)
Comment Flowable, Medium Durometer

View more

MED-4286 6,350 cP 55 Type 000 17.5 hours 45 psi Download MED-4286 data sheet Ultra Soft Elastomer

Product Details

Property Average Result
Viscosity 6,350 cP (6,350 mPa*s)
Durometer 55 Type 000
Work Time 17.5 hours
Tensile 45 psi (0.31 MPa)
Cure 45 minutes / 150 °C
Cure System Platinum
Cure Type Heat Cure
Elongation 475 %
Mix Ratio 1:1
Stress at Strain 8 psi / 200 % (0.06 MPa / 200 %)

View more

MED-6210 16,000 cP 50 Type A 4 hours 930 psi Download MED-6210 data sheet Clear, 1.43 R.I.

Product Details

Property Average Result
Durometer 50 Type A
Viscosity 16,000 cP (16,000 mPa*s)
Work Time 4 hours
Tensile 930 psi (6.41 MPa)
Appearance Translucent
Cure 30 minutes / 150 °C
Cure System Platinum
Elongation 140 %
Mix Ratio 1:1
Refractive Index 1.43
Specific Gravity 1.05
Tear 35 ppi (6.17 kN/m)
Comment Clear, 1.43 R.I.

View more

MED-6215 3,800 cP 50 Type A 5 hours 1,250 psi Download MED-6215 data sheet Clear, 1.41 R.I.

Product Details

Property Average Result
Durometer 50 Type A
Viscosity 3,800 cP (3,800 mPa*s)
Work Time 5 hours
Tensile 1,250 psi (8.62 MPa)
Appearance Clear
Cure 15 minutes / 150 °C
Cure System Platinum
Elongation 100 %
Mix Ratio 10:1
Specific Gravity 1.03
Tack Free Time 16 hours
Comment Clear, 1.41 R.I.

View more

MED-6219 25,500 cP 75 Type A 2.5 hours 1,300 psi Download MED-6219 data sheet Clear, 1.41 R.I., Low Viscosity, High Durometer

Product Details

Property Average Result
Durometer 75 Type A
Viscosity 25,500 cP (25,500 mPa*s)
Work Time 2.5 hours
Tensile 1,300 psi (8.97 MPa)
Appearance Clear
Cure 2 hours / 50 °C
Cure System Platinum
Elongation 65 %
Mix Ratio 1:1
Specific Gravity 1.07
Tear 35 ppi (6.17 kN/m)
Comment Clear, 1.41 R.I., Low Viscosity, High Durometer

View more

MED-6233 73,500 cP 50 Type A 52 hours 740 psi Download MED-6233 data sheet Clear, 1.41 R.I.

Product Details

Property Average Result
Durometer 50 Type A
Viscosity 73,500 cP (73,500 mPa*s)
Work Time 52 hours
Tensile 740 psi (5.1 MPa)
Appearance Clear
Cure 30 minutes / 150 °C
Cure System Platinum
Elongation 380 %
Mix Ratio 1:1
Refractive Index 1.41
Specific Gravity 1.04
Tear 80 ppi (14.11 kN/m)
Comment Clear, 1.41 R.I.

View more

MED-6820 66,000 cP 40 Type A 4.5 hours 670 psi Download MED-6820 data sheet 1.43 R.I., Optically Clear

Product Details

Property Average Result
Durometer 40 Type A
Viscosity 66,000 cP (66,000 mPa*s)
Work Time 4.5 hours
Tensile 670 psi (4.62 MPa)
Appearance Clear
Cure 30 minutes / 150 °C
Cure System Platinum
Elongation 210 %
Mix Ratio 1:1
Refractive Index 1.43
Specific Gravity 1.43
Tear 40 ppi (7.05 kN/m)
Comment 1.43 R.I., Optically Clear

View more

MED2-4420 22,000 cP 20 Type A 3 minutes 585 psi Download MED2-4420 data sheet Low Viscosity, Rapid RTV Cure

Product Details

Property Average Result
Durometer 20 Type A
Viscosity 22,000 cP (22,000 mPa*s)
Work Time 3 minutes
Tensile 585 psi (4.03 MPa)
Appearance Translucent
Cure 15 minutes / 150 °C
Cure System Platinum
Elongation 500 %
Mix Ratio 1:1
Specific Gravity 1.07
Comment Low Viscosity, Rapid RTV Cure

View more

MED3-4420 91,250 cP 23 Type A 15 minutes 1,000 psi Download MED3-4420 data sheet Flowable

Product Details

Property Average Result
Durometer 23 Type A
Viscosity 91,250 cP (91,250 mPa*s)
Work Time 15 minutes
Tensile 1,000 psi (6.9 MPa)
Appearance Translucent
Cure 30 minutes / 150 °C
Cure System Platinum
Elongation 600 %
Mix Ratio 1:1
Specific Gravity 1.11
Tear 75 ppi (13.23 kN/m)
Comment Flowable

View more

MED4-4420 24,000 cP 17 Type A 35 minutes 700 psi Download MED4-4420 data sheet RTV

Product Details

Property Average Result
Durometer 17 Type A
Viscosity 24,000 cP (24,000 mPa*s)
Work Time 35 minutes
Tensile 700 psi (4.83 MPa)
Appearance Translucent
Cure 15 minutes / 150 °C
Cure System Platinum
Elongation 600 %
Mix Ratio 1:1
Tear 35 ppi (6.17 kN/m)
Comment RTV

View more

Primers

Product Non Volatile Content Solvent Data Sheet Comment
MED-160 4 % Naptha Download MED-160 data sheet General all-purpose primer. Use with platinum or moisture cure silicones.

Product Details

Property Average Result
Cure 1 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 4 %
Specific Gravity 0.77
Appearance Translucent
Lap Shear 330 psi (2.28 MPa)
Solvent Naptha
Comment General all-purpose primer. Use with platinum or moisture cure silicones.

View more

MED-162 15 % Naptha Download MED-162 data sheet Increased adhesion to polycarbonate (PC), polyurethane (PU) and polyetheretherketone (PEEK).

Product Details

Property Average Result
Cure 2 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 15 %
Specific Gravity 0.79
Appearance Translucent
Solvent Naptha
Comment Increased adhesion to polycarbonate (PC), polyurethane (PU) and polyetheretherketone (PEEK).

View more

MED-163 15 % Naptha Download MED-163 data sheet Improved adhesion to polyimide (PI). Recommended where platinum inhibition is of concern.

Product Details

Property Average Result
Cure 2 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 15 %
Specific Gravity 0.8
Appearance Translucent
Refractive Index 1.41
Solvent Naptha
Comment Improved adhesion to polyimide (PI). Recommended where platinum inhibition is of concern.

View more

MED-164 10 % Naptha Download MED-164 data sheet Increased adhesion to various substrates. Designed for use with moisture cure systems.

Product Details

Property Average Result
Cure 2 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 10 %
Specific Gravity 0.79
Appearance Translucent
Solvent Naptha
Comment Increased adhesion to various substrates. Designed for use with moisture cure systems.

View more

MED-165 4.8 % Naptha Download MED-165 data sheet Increased adhesion to various metals.

Product Details

Property Average Result
Cure 1 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 4.8 %
Specific Gravity 0.77
Appearance Translucent
Lap Shear 515 psi (3.55 MPa)
Solvent Naptha
Comment Increased adhesion to various metals.

View more

MED-166 6.5 % IPA Download MED-166 data sheet Dispersed in Isopropyl Alcohol, compatible with acrylics.

Product Details

Property Average Result
Cure 1 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 6.5 %
Specific Gravity 0.8
Appearance Translucent
Solvent IPA
Comment Dispersed in Isopropyl Alcohol, compatible with acrylics.

View more

MED1-161 4.5 % Naptha Download MED1-161 data sheet Increased adhesion to aluminum. Use with platinum cure silicones.

Product Details

Property Average Result
Cure 2 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 4.5 %
Specific Gravity 0.77
Appearance Translucent
Solvent Naptha
Comment Increased adhesion to aluminum. Use with platinum cure silicones.

View more

MED2-161 4.5 % Naptha Download MED2-161 data sheet Increased adhesion to most metals. Use with platinum cure systems.

Product Details

Property Average Result
Cure 2 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 4.5 %
Specific Gravity 0.77
Appearance Translucent
Solvent Naptha
Comment Increased adhesion to most metals. Use with platinum cure systems.

View more

MED6-161 8.7 % Naptha Download MED6-161 data sheet Increased adhesion to titanium, polysulfone (PSU), polycarbonate (PC), polyurethane (PU). Recommended where platinum inhibition is of concern.

Product Details

Property Average Result
Cure 2 hours / RTV
Mix Ratio 1 PART
Non Volatile Content 8.7 %
Specific Gravity 0.78
Appearance Translucent
Solvent Naptha
Comment Increased adhesion to titanium, polysulfone (PSU), polycarbonate (PC), polyurethane (PU). Recommended where platinum inhibition is of concern.

View more