SCV2-2599

ULTRA LOW OUTGASSING, THIXOTROPIC, THERMALLY CONDUCTIVE SILICONE

Description

  • Two-part, white, thermally conductive silicone
  • Cures with the addition of heat
  • Designed to allow bond line thicknesses  50 microns
  • 20:1 Mix Ratio (Part A:Part B)

Applications

  • For applications highly sensitive to outgas related contamination
  • To provide heat transfer between electrical/electronic components and their heat sinks
  • Use to adhere integrated circuit substrates, base plates, heat sinks or where grooves or other configurations require a non-flowable to limited flow material
Exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤0.1% and CVCM of ≤0.010%

Product Details

Property Average Result
Thermal Conductivity 0.64 W/(mK)
Extrusion Rate 140 g/minute
Cure System Platinum
Tensile 400 psi (2.76 MPa)
Appearance White
Cure 30 minutes / 150 °C
Durometer 55 Type A
Elongation 225 %
Mix Ratio 20:1
Special Feature
Tear 55 ppi (9.7 kN/m)
Work Time 3 hours
Comment 0.64 W /mK (Tested per ASTM E1530)

What Is Space Grade?

Discover what it takes to make silicones worthy of the distinction "Space Grade" and the rigorous testing that these materials undergo.

Read more

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.