SCV1-2596
ULTRA LOW OUTGASSING ELECTRICALLY CONDUCTIVE SILICONE ADHESIVE/SEALANT
Description
- Two-part, tan-colored electrically conductive silicone
- 20:1 Mix Ratio (Part A:B)
Applications
- For applications requiring Ultra Low OutgassingTM and minimal volatile condensables under extreme operating conditions to avoid condensation in sensitive devices
- Use for RFI and EMI shielding in electrical and space applications
- Well suited for form-in-place conductive gaskets
Exceeds the ASTM E 595 low outgas specifications outlined in NASA SP-R-0022A and European Space Agency PSS-014-702, with a TML of ≤0.1% and CVCM of ≤0.010%
Product Details
| Property | Average Result |
|---|---|
| Volume Resistivity | 0.01 ohmcm |
| Cure System | Platinum |
| Durometer | 85 Type A |
| Tensile | 450 psi (3.1 MPa) |
| Appearance | Tan |
| Cte | |
| Cure | 30 minutes / 150 °C |
| Mix Ratio | 20:1 |
| Special Feature | |
| Specific Gravity | 3.42 |
| Thermal Conductivity | 1.2 W/(mK) |
| Work Time | 2.5 hours |
| Comment | Electricaly Conductive, 0.005 ohmcm ,*21, 22) 1.2 W /mK |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.