R33-2186

FAST-CURE SILICONE ADHESIVE

Description

  • Two-part, translucent, thixotropic, high tear strength silicone system
  • Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Many bonding applications do not require the use of a silicone primer for suitable adhesion
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • As adhesives for bonding and sealing silicones to each other and other substrates such as metals and plastics
  • For rapid production or prototyping due to a rapid cureor applications requiring an operating temperature range of –65°C to 240°C (-85 to 465°F)

Product Details

Property Average Result
Cure System Platinum
Viscosity 124,350 cP (124,350 MPa*s)
Durometer 20 Type A
Appearance Translucent
Cure 24 hours / RTV
Elongation 725 %
Mix Ratio 1:1
Operating Temperature
Specific Gravity 1.12
Tear 150 ppi (26.46 kN/m)
Tensile 1,000 psi (6.9 MPa)
Work Time 2 hours
Comment RTV Primerless Adhesive;Fast cure.

Contact NuSil™ to Order Now

For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.

Contact Us

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.