R33-2186-1

FAST-CURE WHITE SILICONE ADHESIVE

Description

  • Two-part, white, thixotropic, high tear strength silicone system
  • Cures at room temperature or rapidly with the application of heat in an oven, or by a heat gun or lamp
  • Primer is not required for many bonding applications
  • Does not require atmospheric moisture to cure
  • No curing byproducts such as acetic acid or methyl alcohol
  • Consistency allows products to be supplied in easy-to-use, airless side-by-side kits that eliminate mixing and deairing difficulties
  • 1:1 Mix Ratio (Part A: Part B)

Applications

  • For bonding and sealing silicones to each other and other substrates such as metals and plastics
  • Suitable for fast-paced production or prototyping due to it’s rapid cure rate

Product Details

Property Average Result
Viscosity 80,000 cP (80,000 MPa*s)
Durometer 20 Type A
Appearance White
Elongation 740 %
Specific Gravity 1.12
Tear 135 ppi (23.81 kN/m)
Tensile 1,000 psi (6.9 MPa)
Work Time 2 hours

Specialty Silicones for Displays

The NuSil® line of optoelectronic silicones enable device manufacturers from smart phones to stadium screens and everything in between to create next-generation displays that are sharper, brighter and more rugged.

Read more

Save to favorites

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.