R3-2160
HIGH TEMPERATURE ADHESIVE/SEALANT SILICONE ELASTOMER
Description
- Two-part, pourable silicone system
- High tear strength and good physical properties
- Designed for enhanced performance in extreme low and high temperatures
- 1:1 Mix Ratio (Part A: Part B)
Applications
- As a high temperature adhesive/sealant
- Ideal for use in potting connectors, cable harness breakouts, molded high voltage terminals, seals and gaskets due to its high physical strength
Product Details
Property | Average Result |
---|---|
Cure System | Platinum |
Extrusion Rate | 15 g/minute |
Lap Shear | 250 psi (1.72 MPa) |
Durometer | 35 Type A |
Appearance | Red |
Cure | 15 minutes / 150 °C |
Elongation | 525 % |
Mix Ratio | 1:1 |
Post Cure | 2 hours / 150 °C |
Specific Gravity | 1.18 |
Tear | 130 ppi (22.93 kN/m) |
Tensile | 550 psi (3.79 MPa) |
Work Time | 72 hours |
Comment | Thermal Stability |
Contact NuSil™ to Order Now
For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.