Description
- One-part RTV silicone elastomer dispersed in tert butyl acetate
- Based on a fluorosilicone copolymer
Applications
- For coating, sealing and bonding applications requiring solvent and/or fuel resistance
- Designed for spraying, dip casting, and RTV curing of thin, elastomeric films
- For use as a coating to minimize ice adhesion
- Bonds aggressively to most surfaces
- Slight addition of heat will accelerate cure
Product Details
| Property | Average Result |
|---|---|
| Viscosity | 1,625 cP (1,625 mPa*s) |
| Non Volatile Content | 60 % |
| Appearance | Translucent |
| Attribute | |
| Cure | 72 hours / RTV |
| Cure System | Acetoxy |
| Durometer | 25 Type A |
| Elongation | 400 % |
| Mix Ratio | 1 PART |
| Specific Gravity | 1.29 |
| Tear | 35 ppi (6.17 kN/m) |
| Tensile | 425 psi (2.93 MPa) |
| Comment | Dispersion Coating, 60% Solids |
Making the right choice for fuel- and solvent-resistant silicones
Learn how high-purity fluorosilicones resist degradation and maintain performance in aviation and defense applications.
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.