Description
- Two-part, pourable, translucent RTV silicone
- Based on a dimethyl diphenyl silicone copolymer with a broad temperature range
- 100: 0.5 Mix Ratio (Base: Curing Agent)
Applications
- As a heat shielding material for potting, sealing and bonding applications
- For ablative coatings in aerospace applications that require a material that pours
- For applications in extreme temperatures
- For applications requiring an operating temperature range of -115 to 260°C (-178 to 500°F)
Product Details
Property | Average Result |
---|---|
Cure System | Alkoxy |
Viscosity | 9,000 cP (9,000 mPa*s) |
Durometer | 35 Type A |
Appearance | Translucent |
Cure | 7 days / RTV |
Elongation | 175 % |
Mix Ratio | 100:0.5 |
Non Volatile Content | 100 % |
Operating Temperature | -115 °C / 260 °C |
Refractive Index | 1.43 |
Specific Gravity | 1.08 |
Tear | 20 ppi (3.53 kN/m) |
Tensile | 500 psi (3.45 MPa) |
Work Time | 6 hours |
Comment | Resists breakdown at high temperatures. Translucent and 1 hr. pot life. Not recommended for deep section cures. |
The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.