R-2188

SILICONE POTTING AND ENCAPSULATING ELASTOMER

Description

  • Two part, Clear, 1:1 Mix ratio (A:B)
  • Pourable and self-leveling
  • Cures at room temperature
  • REACh and RoHS compliant
  • Tested per UL-94 and passed V-1

Applications

  • For potting, encapsulating and coating of modules, relays, and a variety of AC/DC converters including high power and planar packages
  • Provides protection from moisture, dust and contaminants
  • Increases resistance to shock and vibration
  • Low viscosity allows the potting of complex geometries without the entrapment of air
  • Pot life is compatible with processes that require dispensing or coating with Part A and B combined
  • Dielectric properties compatible with many devices and increase breakdown voltage of device

Product Details

Property Average Result
Cure System Platinum
Viscosity 11,300 cP (11,300 mPa*s)
Durometer 20 Type A
Tensile 475 psi (3.28 MPa)
Elongation 350 %
Appearance Translucent
Cte
Cure 30 minutes / 150 °C
Dielectric Strength 500 volts/mil (19.5 kV/mm)
Ionic Content Cl <5 ppm
Ionic Content K <3 ppm
Ionic Content Na <1 ppm
Mix Ratio 1:1
Specific Gravity 1.05
Work Time 8 hours
Comment Excellent dielectric properties, flexible cure with 14 hr pot life, tested per UL 94 and passed V1.

Contact NuSil™ to Order Now

For over 40 years, the NuSil brand has offered a wide range of high-purity silicones. Our team is ready to collaborate with you to provide silicone solutions to satisfy your unique requirements. For additional guidance during your selection process, or to order a sample, contact NuSil today.

Contact Us

The test data shown for this material is the average value for typical properties. All of these properties may not be tested on a lot to lot basis and cannot be used to draft specifications. Please contact NuSil for assistance and recommendations in establishing limits for product specifications.